Villeroy & Boch Butler Double Sink 6323 User manual

Villeroy & Boch Butler Double Bowl Sink Installation Instructions - March 2019
Page 1 of 3
Villeroy & Boch 6323 Butler Double Sink
INSTALLATION INSTRUCTIONS
ARGENTAUST.COM.AU
1300 364 748
1. Use of epoxies on Villeroy & Boch ceramic sinks will void manufacturer's warranty.
2. Tap holes required should be nominated at time of ordering for factory drilling and no attempt
to punch them should be made, as any damage is not covered by warranty. Order forms for tap
holes available on www.argentaust.com.au .
3. Rear of Villeroy & Boch Butler Sink is unglazed - ensure sink is adequately installed to avoid exposure
of the back of the sink.
4. If installing stone over the sink, ensure stone and sink are supported independently of each other.

Villeroy & Boch Butler Double Bowl Sink Installation Instructions - March 2019
Page 2 of 3
Villeroy & Boch 6323 Butler Double Sink
INSTALLATION INSTRUCTIONS
ARGENTAUST.COM.AU
1300 364 748
8963239C Waste Kit includes:
• 2 x C150000189 – 90 mm Designer wastes
• 1 x 40mm Waste set (For colander)
• 1 x bypass connection kit
Not Included:
• S & P trap connection
• Extended Double Bowl Connector
• Silicone
1.Install 90mm wastes – Using silicone to seal the waste.
2. Install 40mm Waste Set in colander section – Using silicone to seal the waste.

Villeroy & Boch Butler Double Bowl Sink Installation Instructions - March 2019
Page 3 of 3
Villeroy & Boch 6323 Butler Double Sink
INSTALLATION INSTRUCTIONS
ARGENTAUST.COM.AU
1300 364 748
3. Connect double bowl connecter (Extended size required – not supplied)
4. Connect Bypass to 40mm colander waste
5. Connect S & P trap (Not supplied)
Insinkerator Notes:
Recommended to only use Insinkerator
models equipped with anti vibration
technology (Evolution 100 & 200
Models) – Must use Insinkerator Double
Bowl connector for any double bowl
connections.