VitalGo Total-Lift Bed VG-TLB425T User manual

T ota l -Lift Bed
™
VG-TLB425T
Operation Manua l
(For detailed
instructions, safety guidelines and warn i ngs
please refer to the owner’s manual)
Please
Note:
When reaching the end of the movement of each function (un le ss stated
differently) two beeps will be heard as confirmation. All Fun c tions
should be pressed c on tin uous l y.
Safety
Note:
When the bed is in tilting position all other functions will not work
except for (11) & (12) (12 after unlock) for raising the bed to standing
position and lowering the bed from standing to flat pos iti on.
Unlocking (Nurse Only!)
Press
Buttons (11) and (12) together for 3 seconds until two
beeps will be heard.
Emergency Safe Mode (In case the Bed “Freezes”)
Step 1 –Hold buttons 5 + 6 together for 5 seconds. The buzzer will give continues short
signals indicating the Bed is in safe Mode.
To tilt down - Press 11 until the bed is flat.
To lower Backrest - Press 2 until the backrest is flat.
Any time you have had to use the Safe Mode to lower the Total Lift bed, the bed
should be inspected by a qualified technician.
Blinking blue LED’s on the side-rails indicates a temporary bed stoppage to
help prevent a bed malfunction.
To Restart, simultaneously press buttons 3&4 continuously (10 beeps will be heard)
until beeping stops. LED’s should return to solid indicating bed is fully functioning.
In case Blinking continues or repeating, call a technician.

Raising
The
Back Re st
Raising
The
Leg R e st
Raising
the
Bed Horizontally
Lowering T h e
Back Re st
Lowering
T h e
Leg R e st
Lowering the
Bed Horizontally
Seating with
Legs Down
+ Foot Boar
d
Out
Foot Board
In
Wheels
Position:
Lower the Bed and
activate t h e
Wheels
CPR Position
Bed Flat
T r endelenburg
Raising the Bed
to Standing
Position
(Sho uld be
Unlocked first)
REV-1 A -755-61
CPR
FLAT