VitalGo VG-TLB 425V/T User manual

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10, 2016
Total-Lift Bed
™
Elevating Patient Care & Mobility
ASSEMB L Y , OPERATING AND MAINTENANCE MANUAL
Bed
Model:
VG-TLB 425 V/T
DEALER: This manual MUST be given
to the user of the pr oduct.
USER: BEFORE using this product, r ead
this manual and save for future r efer ence.
For
more information r egarding
VitalGo products,parts,and services,
please visit www .vitalgosys.com
© 2015 Vitalgo Systems Ltd.
All rights reserved. Vitalgo, the Vitalgo logo, Total-Lift Bed™, Joy Bath, Joy Spa, Total-Lift Chair and Total-Lift Toilet Seat are trademarks of Vitalgo Systems Ltd. Other
names are the property of their respective owners.

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10, 2016
2 of 42
WARNING
DO NOT OPERATE THIS EQUIPMENT
WITHOUT FIRSTREADING AND UNDERSTANDING THIS MANUAL.
IF YOU ARE UNABLE TO UNDERSTAND THE WARNINGS, CAUTIONS, AND INSTRUCTIONS, CONTACT A
HEALTHCARE PROFESSIONAL, DEALER OR TECHNICAL PERSONNEL BEFORE ATTEMPTING TO USE THIS
EQUIPMENT - FAILURETO DO SO COULD RESULT IN DAMAGE, INJURY AND DEATH OF THE USER/ P A -
TIENT.
THE INITIAL SET UP OF THIS BED MUST BE PERFORMED BY A QUALIFIED TECHNICIAN.
PROCEDURES OTHER THAN THOSE DESCRIBED IN THIS MANUAL MUST BE PERFORMED BY A QUALIFIED
TECHNICIAN.
FOR DEALERS ONLY - SET-UP AND ASSEMBLY INSTRUCTIONS ARE INCLUDED IN THIS MANUAL. THESE
PROCEDURES MUST BE PERFORMED BY A QUALIFIED TECHNICIAN ON L Y .
PLEASE NOTE: Updated versions of this manual are available on www .vitalgosys.com.
SPECIAL NOTES
Signalwords are used in this manual and applyto hazards or unsafe practices which could result in
personal injury or property damage. Referto the text below for definitions of the signalwords.
SIGNAL WORD DEFINITIONS:
DANGER - Danger indicates an imminently hazardous situation which, if not avoided, couldresult in
death or serious injury.
WARNING - Warning indicates a potentially hazardous situation which, if not avoided, could result in
death or serious injury.
CAUTION - Caution indicates a potentially hazardous situation which, if not avoided, couldresult in
property damage.
NOTICE
THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE.
V italgo products are specifically designed and manufactured for use in conjunction with V italgo
accessories. Accessories designed by other manufacturershave not been tested by V italgo and are not
recommended for use with V italgo products.
DANGER/ WARNING/ CAUTION
SUMMAR Y
• KEEP HANDS AND FEET CLEAROF ALL MOVING P ARTS.
• DO NOT ALLOW SMALL CHILDRENON OR NEAR BED DURING OPERATION.
• DO NOT ALLOW THIS DEVICE TO BE OPERATED BY SMALL CHILDREN.
• WHEN OPERATING THE HI-LOW, KNEE, TILTING, LEG REST OR BACK FUNCTION OF THE BED, AL W A YS
ENSURE THAT THE INDIVIDUAL CONFINED TO THE BED IS POSITIONED PROPERLY WITHIN THE
CONFINES OF THE BED. DO NOT LET ANY EXTREMITIES PROTRUDE OVER THE SIDE OR BETWEEN THE
BED RAILS WHEN PERFORMING ANY FUNCTIONS.
• DO NOT USE UNAUTHORIZED SIDE RAILS.
• WARNING/ CAUTION LABELS APPLIED TO THE BED OUTLINE HAZARDS OR UNSAFE PRACTICES THAT
COULD RESULT IN PERSONAL INJURY AND/OR PROPERTY DAMAGE.
• POWER AND WIRED HAND SET CORD MUST BE ROUTED AND SECURED PROPERLY TO ENSURE THAT

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10, 2016
3 of 42
THE CORD DOES NOT BECOME ENTANGLED AND EVENTUALLY SEVERED DURING USE. MAKE SURE
ELECTRIC CORDS DO NOT GET TANGLED AROUND THE BED, SIDE RAILS OR LEGS DURING NORMAL
OPERATION OF THE BED.
• KEEP ALL MOVING PARTS FREEOF OBSTRUCTIONS (I.E. BLANKETS/SHEETS, HEATING BLANKETS/
PADS, TUBING, WIRING, AND OTHER TYPES OF PRODUCTS).
Meaningof the Safety Symbols
In
these instructions the following safety symbols are used:
Danger!
W arning!
C aution!
Important !
Warningabout injuries to persons
Dangerous voltage. Life Threatening.
General danger . Injury or life hazard.
Warningabout property damages
Possibility of damage to motor, material or environment.
OTHER SYMBOLS
Useful tip. For easier operation or better understanding of the unit.
Company name and address
Manufacturing date
IPX4
Protected against splashing water
Consult instruction manual
The
item meets all the essentialrequirements of the relevant European Directive(s).
This
Symbolapplies to European Union only as is defined as “Separate collection for
electrical and electronic equipment waste per Directive 2002/96/EC in the EuropeanUnion”
Type B
device
Referenceto the hazards in the instructionmanual
!
Maximum Patient W eight
Safe
Working Load - indicates maximumbed weight handling capacity
!
The
safety symbolsused does not r eplace the text of the safety notes.
Therefore read the safety instructions and follow them exactly!

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10, 2016
4 of 42
T able Of Contents
WARNING
............................................................................................................................................. 2
SPECIAL NOTES ..................................................................................................................................... 2
NOTICE .................................................................................................................................................. 2
DANGER/ WARNING/ CAUTION SUMMARY........................................................................................ 2
MEANING OF THE
SAFETY SYMBOLS .................................................................................................. 3
PREFACE ................................................................................................................................................ 7
ABOUT THE
VITALGO TOTAL-LIFT BED™ ........................................................................................... 8
UNPARALLELED SAFETY ..................................................................................................... 8
GENERAL GUIDELINES & SAFETY INSTRUCTIONS ............................................................................... 9
OPERATING INFORMATION................................................................................................. 9
ENTRAPMENT WARNING .................................................................................................... 9
REPLACEMENT PARTS/ACCESSORIES GUIDELINES ............................................................. 9
ELECTRICAL GUIDELINES ................................................................................................... 10
REPAIR OR SERVICE INFORMATION.................................................................................. 10
RADIO
FREQUENCY INTERFERENCE ................................................................................. 11
WEIGHT
LIMITATIONS ....................................................................................................... 11
BEFORE PUTTING THEBEDINTO OPERATION FOR THE FIRST TIME............................... 11
WARNINGSFOR
USERS AND CAREGIVERS........................................................................................ 11
DEFINITIONS OF INVOLVED PERSONS .............................................................................. 12
SAFETY INSTRUCTIONS FOR TECHNICIANS ...................................................................... 12
SAFETY INSTRUCTIONS FOR USERS AND CAREGIVERS ................................................... 13
VG-TLB-425V/T BED DESCRIPTION ..................................................................................................... 14
PRODUCT DESCRIPTION ..................................................................................................................... 15
NORMAL
OPERATING PROCEDURE ................................................................................. 15
SPECIAL FEATURES ............................................................................................................ 15
CLASSIFICA TION ................................................................................................................. 15
TECHNICAL SPECIFICATIONS .............................................................................................................. 16
BED
DIMENSIONS ............................................................................................................................... 16
RECLINING SURFACE FRAME ............................................................................................ 18
ELECTRIC ADJUSTMENT SYSTEM ...................................................................................... 18
DESCRIPTION OF MATERIALS............................................................................................ 19
LABEL LOCATIONS ............................................................................................................. 19
OPERA TION ......................................................................................................................................... 20
SIDE RAIL CONTROL ........................................................................................................................... 20

5 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
WIRED HAND SET ............................................................................................................................... 20
CONTROL FUNCTIONS ........................................................................................................................ 21
MANUAL
FUNCTIONS......................................................................................................................... 21
ADJUSTMENT OF THE BACK REST –(1&2) ....................................................................... 21
RAISING & LOWERING LEG-REST –(3&4) ......................................................................... 21
RAISING & LOWERING THEBED HORIZONTALLY –(5&6) ............................................... 22
FOR
LOWEST SLEEPING POSITION .................................................................................... 22
MOVING THE
FOOTLIFTER ................................................................................................ 22
WHEELS POSITION ............................................................................................................. 22
AUTOMATIC FUNCTIONS .................................................................................................................. 22
SEATING WITH LEGS DOWN ............................................................................................. 22
CPR–
(SLEEPING POSITION) .............................................................................................. 23
NURSE FUNCTIONS: TILTING ............................................................................................. 23
TRENDERLENBURG POSITION (IN BEDS WITH THIS FUNCTION) –. ................................ 23
SIDE RAIL CONTROL PANEL OPERATION........................................................................................... 24
CLEARING ERRORS ............................................................................................................................. 24
INITIALIZATION OF THEBED (ONLY BY TECHNICIAN) ...................................................................... 25
STRAPPING SYSTEMS(OPTIONAL)...................................................................................................... 25
NON
AMBULATORY PATIENT STRAPPING SYSTEM ......................................................................... 26
RETRACTABLE HEAD BOARD ............................................................................................................. 26
CHEST STRAP FLANGE ........................................................................................................................ 26
THIGH
STRAP ASSEMBLY ................................................................................................................... 26
MATTRESS ATTACHMENT .................................................................................................................. 27
TROUBLESHOOTING........................................................................................................................... 28
MAINTENANCE ................................................................................................................................... 29
MAINTENANCE CHECKLIST . .............................................................................................................. 29
ELECTRICALINSPECTION AND MAINTENANCE ............................................................... 29
RECHARGEABLE BATTERIES MAINTENANCE ................................................................... 30
CLEANING AND DISINFECTING ........................................................................................ 30
TOTAL-LIFT BED™ ACCESSORIES (OPTIONAL) .................................................................................. 31
SIDE RAILS .......................................................................................................................... 31
IVPOLE/
TRAPEZE.............................................................................................................. 31
TOTAL LIFT BED–WEIGHT BEARING CONTROL SYSTEM............................................................... 32

6 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
LOW AIR
LOSS MATTRESS SYSTEM – (OPTIONAL)............................................................................ 34
EXPLANATION OF SYMBOLS USED ON THIS DEVICE....................................................... 34
OPERATING INSTRUCTIONS .............................................................................................. 36
CPR
FUNCTION(VG-TLB425-CAM4 MATTRESS SYSTEMS) ................................................ 38
TECHNICAL SPECIFICATIONS ............................................................................................. 38
PERFORMANCE SPECIFICATIONS ...................................................................................... 38
MECHANICAL SPECIFICATIONS ......................................................................................... 38
ENVIRONMENTAL SPECIFICATIONS .................................................................................. 39
SAFETY AGENCY APPROVALS........................................................................................... 39
INCLINOMETER – ANGLE SENSOR ..................................................................................................... 40
LIMITED WARRANTY.......................................................................................................................... 41
ABOUT
VITALGO SYSTEMS L TD. ........................................................................................................ 42
OUR
MISSION..................................................................................................................................... 42
FLAGSHIP PRODUCT ........................................................................................................................... 42

7 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
Pr eface
Dear customer ,
Thank you for the confidence you have shown in VitalGo Systems products.
The
Total-Lift Bed™ has been factory checked for electrical safety. All functions have been checked and were
operating perfectly before delivery
Pleasetake your time to read this manual carefullybefore operating the bed. This manual appliesto normal
use of the bed and assemblyand maintenance. It is also a practical reference guide. Keep the instructions in a
handy place. These instructions provide information for the operator and user regarding the convenient han -
dling and safe operation of the bed.
Wehope that the VitalGo Total-Lift Bed™ enables you to promote optimal patient mobilityand comfort, and
maximal caregiver safety in getting yourpatients out of bed.
VitalGo
Systems L TD.

8 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
About The V italgo T otal-Lift Bed™
The
Total-Lift Bed™ sets new standards in patient and caregiversafety, treatment and comfort.
The T otal Lift Bed™ is a Bed and so much more providing many advantages over conventional beds.
The revolutionary design allowsthe bed to raise the user to a fully standing positionand all positions in be-
tween including chair positions.
Among all its clinical obviousbenefits, the T otal Lift Bed™ is the best instrument for Early Mobility, safe pa -
tient handling and safe lifting.
The T otal Lift bed™ is ideal for use in any kind of Medical facility and and is especially for –
• AcuteCare.
• Burn Units.
• Orthopedicpatient population.
• Early Mobility
• Progressive Mobility.
• Safe patient Handlingand Safe Lifting.
• Rehabilitation
• Neurologic patient population.
• Fall Prevention
With just a press of a button you can bringthe patient to any position desired.
The Patented technology of the total Lift Bed™, movesthe Foot Lifter ™ towardsthe feet of the patient /
user, and only when making contact will start the tilting function, thus preventing any danger of sliding in
bed. Whilethe bed tilts, when in proper angle the Foot Lifter ™will gradually move down so when the bed
is in fully standing positionthe Foot Lifter will be parallel to floor allowingto simply walkout of bed, with or
without assistance.
The patient can be just tilted, for treatment, in any desired angle, for as long as needed. The T otal Lift
Bed™ has all possiblebed and chair positions.
The T otal Lift Bed™ can come with powered air mattress and high quality non powered mattress.
WEIGHT BEARING CONTROL –The T otal Lift Bed is the only real true “Weight Bearingcontrol device” ,knowing
the exactamount of pressuretransfer to the feet and through body of the patient / user, which can be increased
or decreased by changingthe beds angle.
The T otal Lift Bed™ has all safety features and is FDA and CE registered conformingwith the EN/ IEC 60601-2-
52 and the Assessment Guidance to Reduce Entrapment.
UNPARALLELED SAFETY
Safety is the top priority of all V italgo products. The Total-Lift Bed™ incorporates numerous safety features
and mechanisms and meets or exceedsthe highest standards for medicalelectricbeds.
The T otal Lift Bed is FDA and CE Registered. The T otal Lift Bed has been tested and conformedwith IEC
60601-1:2005 / EN60601-1:2006 3rd Ed. and 60601-2-52(First Edition).
The integrated safety features include:
• Exclusive self-adjusting Foot-Lifter™ – Automatically moves up to rest under the user’s feet prior to the
bed tilting into an upright position, preventing the user from slidingdown the bed. Embedded micro-
switchesensure the user is properly positioned and that when the bed is in an upright position,the user’ s
feet are at ground level.
• Safety Rails (optional) –Can be added to the upper and lowerpart of the bed, on one or both sides. V italgo
has adopted all FDA clinical guidance to reduce Entrapment.
• Electronic braking – Casters are electronically lowered to allow mobility and raised to secure stability; they
are automatically raised before the bed can be tilted or the sitting/reclining positioning adjusted. The cast -
ers have T otal Lock function and one directional lock for easy transportation of bed.

9 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
General Guidelines & Safety Instructions
OPERATING INFORMATION
DO NOT use
near explosivegases.
Keep the product a minimum of 12” away from any direct heat source.
Close
supervision is necessarywhen this product is used by or near children or people with disabilities.
Check all
parts for shippingdamage and test before using. In case of damage, DO NOT use. Contact a qualified
technician for further instruction.
After any adjustments, repair or serviceand before use, make sure all attaching hardware is tightened securely.
DO NOT let any individual underneath the bed or in between the raised bed frame components at anytime.
When bed is not to be used for an extended period, unplug electricbed from the wall outlet.
When operating the bed body weight should be evenlydistributed over the surface of the bed. DO NOT lay, sit
or lean in such a way that yourentire body weight is placed only on raised head or foot sections of the bed.
This includes when assisting the user in repositioning or transferring in or out of bed.
This Warning DOES NOT apply to the Foot Lifter™.
When operating/moving beds, alwaysensure that the individual utilizing the bed is positioned properly within
the confines of the bed. DO NOT let any extremitiesprotrude over the side or between the bed rails when per -
forming these functions.
If
the unit is not working properly, call a qualified technicianto examinethe unit and repair it.
Keep all moving parts, including the main frame, mattress deck (head and foot sections)and all drive shafts,
free of obstruction (i.e. Blankets/sheets,heating blankets/pads, tubing, wiring, etc. and other types of products
using electric cords which may get tangled around the bed, side rails or legs) during operation of the bed.
ENTRAPMENT WARNING
Proper
patient assessment and monitoring, and proper maintenance and use of equipment is r equir ed to
r educe the risk of entrapment. Variations in bed rail dimensions, and mattress thickness, size or density could
increase the risk of entrapment.
Visit the FDA web site at http://www.fda.gov to learn about the risks of entrapment.
After any adjustments, repair or service and before use, make sure all attaching hardware is tightened se-
curely. Assist rails with dimensions different from the original equipment supplied or specified by the bed
manufacturer may not be interchangeable and may result in entrapment or other injury. Mattress MUST fit bed
frame and assist rails snugly to r educe the risk of entrapment.
REPLACEMENT PARTS/ACCESSORIES GUIDELINES
VitalGo products are specifically designed and manufactured for use in conjunction with VitalGo accessories.
Accessories designed by other manufacturershave not been tested by VitalGo and are not recommendedfor
use with VitalGo products.
Use ONLY
VitalGo’s Total-Lift Bed™ supplied mattress and connect it to the bed frame accordingto the instruc -
tions in this manual (see page 32)
Bed rails can be deformed or broken if excessive side pressure is exerted on the bed rails. Thesebed rails are

10 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
used for the purpose of preventing an individualfrom inadvertently rolling out of bed.
The bed rails are NOT intended nor may be used for restraint purposes. If an individual is capable of injur -
ing himself/herself,a physician or a healthcare professionalshould be consulted for alternative means of safe
restraint.
DO NOT use
the side rails as push handles for moving the bed.
If
the patient assessment concludes that the patient’s condition increases the chance of entrapment, the bed
MUST be in the flat positionwhen left unattended.
T rapeze units must not be used whilethe bed is in operation.
T rapeze unitsare to be used only for assisting the patient in repositioning or transferring into or out of bed
and must be movedaway from the bed as soon as the patient finishedusingthem.
Replacement mattresses and bed side rails with dimensions different than the original equipment supplied or
specified by the bed frame manufacturerare not interchangeable.
V ariations in bed side rail design, width and thickness or firmness of the mattress couldcause/contribute to
entrapment.
Use only authorized VitalGo replacement parts and/or accessoriesotherwise the warranty is void. VitalGo will
not be responsible for any damage or injurythat may result.
ELECTRICAL GUIDELINES
DANGER
Connect the bed directly to an electricaloutlet. Do not use extension cordsand/or multiple outlet extension
cords.
Use of
three prong adapters can result in improper grounding and present a shockhazard to the user .
NEVER
operate if the unit has a damaged cord or plug. If it is not working properly, call a qualifiedtechnician
for examination and repair .
Keep all electrical cords away from heated or hot surfaces.
Ensure all cablesand cordsare routed such that they will not becomeentangled or pinched. Otherwise damage
or injury may result.
DO NOT
unplug power cord from junction box.
The
pendant and power cordsmust be routed and securedproperlyto ensure that the cords DO NOT become
entangled, pinched and/or severed during operation of the electric bed.
Refer servicing to qualified personnel only. Grounding reliabilitydepends upon a properly grounded wall out -
let.
REPAIR OR SERVICE INFORMATION
DO NOT
open assemblies such as the motors, pendant, junction boxes or gear boxes. No user serviceable parts
are inside. Only qualified technicians(qualified by Vitalgo) are permitted to repair these parts. If unqualified
individualsperform any work on these beds, the warranty is void.
Unplugthe power cord from its power sourcebefore performing any maintenance on the bed.

11 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
DO NOT
unplug the power cord from the junction box. Damageto cord will result.
RADIO FREQUENCY INTERFERENCE
Electronic equipment may be influenced by Radio Frequency Interference (RFI). Caution should be exercised
withregard to the use of portable communicationsequipment in the area around such equipment.
If RFI causeserratic behavior, unplug the electricbed IMMEDIATELY. Leave unplugged while transmission is in
progress.
WEIGHT LIMIT A TIONS
The
total weight limit of the VitalGo Total-Lift Bed™ VG-TLB425V/T is 425 pounds (195Kg) patient weight. DO
NOT permit more than one person on/inthe bed at any time.
Whenthe bed is an operation body weight should be evenlydistributed over the surface of the Total-Lift Bed™.
DO NOT lay, sit or
lean in such a way that your entire body weight is placed only on raised head or foot sec -
tions of the bed.
This includeswhen repositioning or transferring in or out of bed. This Warning DOES NOT applyto the Foot
Lifter™.
BEFORE PUTTING THE BED INTO OPERATION FOR THE FIRST TIME
Read these instructions carefully in order to avoiddamage or incorrect operation. Before using the T otal-Lift
Bed™, the user shall ensurethat it is in Proper working order and free of defects,and be aware of the instruc -
tion manual. This applies also to all accessories.
The
VitalGo Total-Lift Bed™ complies with all requirements of the guidelines for medical products. It is classi -
fied as a Medical Equipment Electrical Operated Hospital Bed in accordance with standard IEC60601-1:2005
/En 60601-1:2006 (third Edition) and EN60601-2-52:2009 (First Edition).
The
VitalGo Total-Lift Bed™ was checked by an independent examininginstitute. As with all technical, electri-
cal devices improper handling can lead to damage and/or injury.
Observe your obligations as an operator in accordance with medical devices Operators guidelines for Medi -
cal Products in order to ensure a dependable and safe operation of this medical device without endangering
patients, usersand third parties.
This
manual contains safety guidelines, whichmust be observed. All persons who work with the VitalGo T otal
Lift Bed™ must familiarize themselves with these instructions and follow the safety guidelines.
WARNINGS FOR USERS AND CAREGIVERS
Positionthe power cable in such a way that duringnormaloperation of the bed the cable will not be stretched,
driven over or interfere with moving parts of the bed.
Before any relocation of the bed it is imperativethat the power cable is pulled from the wall socket andthat
the cable cannot fall or be dragged overthe floor .
Check
the power cord regularly for damage (abrasions, exposed wires, kinks, pressure marks, etc.) In particular:
• After every larger mechanical strain (e.g.: Rolling over the power cord with the bed or with an equipment
cart.
• After a strong pulling or bending load caused by the bed rollingaway with the power cord still attached to
the wall outlet.

12 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
• After relocating/moving and before plugging in the power cable.
• During prolonged operating by the user .
Do
not use the area under the Total-Lift Bed™ as a stoage area for anything.
Lowerthe bed to sleeping positions (see Page 23) and lift side rails if present when leavingthe patient unat -
tended. This reducesthe risk of injuryto the patient getting in and out of the bed (considerrestrain laws in the
different countries).
Keepthe wired hand set safe from accidentally falling during non-use (Hang it on the its holder). Take care that
the cable is not damaged by the moving parts of the bed.
To
protect the patient and especially children from unintentionally operating the Wiredhand set, place it be -
yond their reach.
Place
the wiredhand set out of the patient’s reach when:
• The patient is not able to control the bed safely or he is unableto get out of dangerous positions without
help.
• Whenbed has functioning problem.
• Unsupervisedchildren are in the room with the Total-Lift Bed™.
• The wired hand set is only to be used by authorized personal.
Initialization functions can only be performed by a properlytrained personal.
Definitions of involved persons
In this
manual the followingpersons are involved:
TECHNICIAN
A person trained and authorized by V italgo to servicethe bed, or is working for VitalGo’s distributor and was
trained by distributor with VitalGo’s guidelines.
The technician is responsible for instructingthe user in the proper use of the unit.
CARE GIVER
Caregiversare persons who as a result of training and experienceare authorized to operate the Total-Lift Bed™.
The care giver can recognize and avoid possibledangers, and judge the clinical condition of the patient.
USER
In this manual a the user is:
In Healthcare facilities – Authorized person by the facilityto take care of Patients within the facilityand was
trainedto use the T otal Lift Bed- “Trained Personal”
In private homes (where the person usingthe bed is independent) – the User is the person usingthe T otal Lift
Bed.
Outside Healthcare facilities – (wherepatients are not independent) –only Caregiver (including house member)
who was trainedto use the T otal Lift Bed.
SPECIALIST STAFF
Specialiststaff are employees of the suppliers, or anyone certified by the company, who are authorized as a re -
sult of their education and training to deliver,assemble,dismantle and transport the Total-Lift Bed™. Further -
more, they are familiarwith the regulations for cleaning and disinfecting the unit.
Safety instructions for T echnicians
Before first use, instruct every user in the safeoperation of the Total-Lift Bed™ in accordance with these safety
instructions, whichmust be supplied along with the unit.

13 of 42
Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 2016
Call
attention to the dangers of improper use of the unit, especially in regards to the electrical drivesand side
rails.
When the Total-Lift Bed™ is located in institutions (e.g.: Hospitals,nursing homes etc.) The unit should only
be operated by properly trained personnel.
When in home use the Total-Lift Bed™ should only be used by userswho read and understood thoroughly the
operation manual.
Duringlong term use it is recommendedthat the Total-Lift Bed™ be inspected for function and visible dam -
age at regular intervals (Recommendation: yearly, if not on a rental fleet, and after every delivery in case on
rental fleet. (see Maintenance Checklist - Page 27).
Connect the bed directly to an electricaloutlet. Do not use extension cords and/or multiple outlet extension \
cords.
When attaching other equipment (e.g. compressors for positioning systems) make sure that they are mounted
and can function in a secureand safe manner (based on manufacturer safety recomendations).
Do
not put multiple outlet electrical extensions under the bed. Leakingliquids can causea fire hazard. Pay
special attention to: Secure locations for all wiring, cables, tubes, etc.
For further information please contact the manufacturer of the accessories or VitalGo Systems directly. Make
sure that your personnel follow the safety instructions.
Safety instructions for users and car egivers
Let
the technicianinstruct you in the safe use of the bed.
Before each use makesurethat the bed is in proper working order .
Take
carethat no obstacles, such as furniture or slanted ceilings interfere with the adjustment functions (See
clearing page 19-20).
Important!
Patients under 5.5’ (170cm) tall, should make sure their feet touch the Foot Lifter™ before entering tilting posi -
tion.
Pay
attention that when using additional electricalcomponents, such as patient lifts, reading lights or compres -
sors for positioning systems that their electrical cords do not get entangled or damaged by the moving parts of
the bed.
Connect the bed directly to an electricaloutlet. Do not use extension cordsand/or multiple outlet extension
cords.
Make sure that when attaching other appliances (e.g. Compressors for positioning systems) that a safe mount -
ing and function is guaranteed.
Removemoveable items from the bed before starting the tilting operation. Make sure you can see the hand
control functions.
Do
not put multiple electrical outlets under the nursing bed. Leakingliquids can be a fire hazard. Pay special
attention to securely locating all wiring, cables, tubes, etc.
For
further information please contact the dealer or person from which you purchasedthe bed or VitalGo Sys-
tems directly .
Take
the bed out of operation if damage or a malfunction is suspected: Immediatelyunplug the electrical plug
fromthe wall outlet; Call a qualified technician.
Do not use the bed until a technician has inspectedthe bed and approved it for use.

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 , 2016
VG-TLB-425V/T Bed
Description
14 of
42

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 , 2016
15 of 42
Product description
NORMAL OPERATING PROCEDURE
The
T otal Lift Bed, Hereafter called bed, is a, one of its kind, T ilting Bed which can take the userto a standing
position, seating position with legs down/ up and many other positions as described in this manual.
The T otal Lift Bed has a state of the art programmable system,which allows many functions and possibilities,
for the safety,comfortand independence of the userand Care giver .
The T otal Lift Bed facilitates compliance with the National Institute of Occupational Health (NIOSH) andthe
American Nurses Association (ANA) standards.The Bed can be used by one Care Giver and by the user himself,
if capable (only in Home use).
The T otal Lift Bed can help in numerous medical conditions.
T otal Lift Bed safe working load is 616lb(280 kg) and max patient capacity is 425lb(193 kg).
For users under 5’ (150cm), please make sure that the user feet is touching the foot-lifter, in order to avoid
dangerous sliding of the patient.
Alwayssecure the patient using the strapping system,when using the tilting function.
The T otal Lift Bed may only be operated under the operating instructions laid out in this instruction manual.
Any other use is deemed to be inappropriate.
SPECIAL FE A TURES
HEIGHT ADJUSTMENT (Error range –see page 16)
Electrical height adjustment of the reclining surface from approx. 18”(46cm). to 29.5”(75cm).
Electrical movement of the Foot Lifter™ is from approx. 8”(20cm). into the bed (over the mattress)to about 4”
(10cm) outside the bed.
LYING/SITTING POSITION
Electrical adjustment of the backrest from 0° to about 63° (±5°).
Electrical adjustment of the thigh rest from 0° to about 6 .5° (legs down) (±3°)
and from 0° to about 25° (legs up). (±3°)
Electrical adjustment of the Leg rest from 0° to about 54°(±3°).
IN
TILTING / VERTICAL POSITION
The bed joints work in synchronizationbringing the bed to around 82°. (±3°) .
The bed is driven with four castors which become functional only when bringing the bed to “WHEELS”
position accessible through the hand set.
CLASSIFICATION
EU - The
unit is classified as Class I with B type of applied part, continuouslyoperated, movable and without
signal input output parts. Water resistance complywith IPX4 the device is not intended for use in presence of
flammable mixtures.
FDA - Device Class II, adjustable electric hospital bed, AC-powered regulation number 880.5100
The tested product satisfiesthe requirements of IEC 60601-1:2005 / EN 60601-1;2006 3rd Edition; 60601-2-
52:2009 1st Edition

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 , 2016
16 of 42
T echnical Specifications
Bed Weight - (Including Low Air Loss mattress) 315kg (695lb), with addition of IV Pole and Trapeze 328kg (723lb).
Bed Dimensions:
(Possible error ± 15mm)
• Length:
Overall Length (in regular position).............................85.83” (218cm)
Overall Length –Fully extended (Foot lifter out)........89.76” (228cm)
• Width:
Overall Width – With Side -Rails...................................40.95” (104cm)
Overall Width – Without Side- Rails....................................37” (94cm)
• Height:
Low Position – deck to floor.........................................20.67” (52.5cm)
High Position – deck to floor........................................29.72” (75.5cm)
• Clearance:
From frame to floor..........................................................1.38” (3.5cm)
In Standing Position:
From top of Bed to floor.................................................80”(204cm)
• Mattress Dimensions–(Foam):
Length............................................................................78.75” (200cm)
Width....................................................................................35” (89cm)
Height................................................................................6” (15.20cm)
* Air Loss
Mattress (Optional) See page 35
• Casters & Breaking System:
Diameter.............................................................................5” (12.70cm)
Smart Break
TM
– Casters are lifted from floor when not in “Wheels” position Each
Side of bed has central locking break system (one side)
Directional Lock –On one caster for easy maneuvering of bed.
This caster is Anti-static.
• FootLifter:
Movesover Mattress 7.90” (20cm) towards Head Rest.
Movesout of Bed – 3.95” (10cm).
Moves up in Chair Positionuntil contact with feet or
Max. of 7.90” (20cm).
• Positions:
Sleeping
Chair Position (Legs down with foot lifter support) with reclining.
Leg Rest - Up & Down.
Back Rest Up.
T rendelenburg (In 425T)
T ilting positions up to StandingPosition.
• Control:
Control by Smart pre-programmed Hand Set.
T ilting function is locked for Nurse / Care giver use only.
Automatic functions for seating with legs down and reclining,including foot support.
Hand Set works with constant press only.
Additional control, for basic functions, on side-rail, forpatient and care giver .
• StrappingSystem:
One strap in Waist area.
Up to three straps in lower extremities area

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 , 2016
17 of 42
40.95” (104cm)
37.8”
20.67” (52.5cm
87.87” (
3.95” (10cm)
7.90” (20cm)
(96cm)
)
85.82” (218cm)
1.25” (3.18cm)
223.5cm)
87.40” (222cm)

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 , 2016
18 of 42
18.11” (46c
o
m)
• Maximum user weight: 425 lb.(193kg)
!
• Maximum Safe loading capacity –616 lb (280kg)
!
• Casters/ brakes: Electrically controlled and individualmechanical break on each caster .
• • Electronic Wired hand set: Integrated 12 functions + caregiverfunction
Electricity r equir ements: Voltage - 100V ~ AC 120V ~ AC 230V~AC
AC Current - 6.8A 5A 3A
Max Frequency 50/60HZ 60HZ 50HZ
Power Consumption Max 200W 280W 280W
• Environmental condition
Ambient Temperature -
Relative HumidityRange -
Atmospheric Pressure Range -
• Battery backup: Optional
For Use For Transport & Storage
10ºC (50ºF) to 40ºC (104ºF) -40ºC (-40ºF) to 70ºC (158ºF)
20% to 85% non-condensing 10% to 95% non-condensing
700 hPa to 1060 hPa. 500 hPa to 1060 hPa.
RECLININGSURFACE FRAME
The reclining surface frame has four sections:a movable backrest, a moveable thigh rest, a movable leg rest
and a movable Foot Lifter™. All parts can be adjusted by electric motors. The horizontal height of the reclin -
ing surface can be adjusted and inclined. All adjustment functionsare controlled by a Wiredhand set and basic
controls are available on the head-side, side rails, from both sides.
The mattress base of the Total-Lift Bed™ consists of washable HPL;
The Total-Lift Bed™ has side rails on both sides which can be raised as a barrier or removed when not needed.
This safeguards the patient from accidentallyfalling out of the bed.
The rails are designed accordingto FDA and CE recommendationto avoidentrapment (Hospital Bed System
Dimensional and Assessment Guidance to ReduceEntrapment).
ELECTRIC ADJUSTMENT SYSTEM
The electrical adjustment system of this bed is error protected, flame-retardant (V0) and consists of An external
transformer unit which consists of a power cable,the transformer, and a low voltage connection cable.
The transformer creates a 24volt low voltage, which is safe for patient and user. The transformer supplies all
drivemotors with the 24volt safety low voltage. The connecting socket on the bed frame is moisture proof.

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 , 2016
19 of 42
DESCRIPTION OFMATERIALS
The bed is mostlyconstructed out of steel sections,their surfaces are mostlypowder coated and some
are painted. Some steel parts have black oxide coating and chrome-nickelcoating. There is also use of
aluminum.
The
washable HPL are made of HPL (High Pressure Laminate).
Foot-Lifter™ is made of ABS plastic.
Side Rails and Headboard are ABS.
All surfacesare harmless to skin contact.
LabelLocations

Form A-755-6
Rev.: 4 .0
Rev. Date: July 10 , 2016
20 of 42
OPER A TION
CAUTION
Allow
a slight pause between adjustments and avoid pressing multiple buttons at the same time unlessindicat-
ed. If wired hand set buttons are depressed too rapidly or wrong button combinations are pressed at the same
time, the desiredfeature may not activate.
Simply release the wired handset button, permit a slightpause and then activate the next operation. Before
placingthe bed into use, test it by operating it through all phases of its operation.
If any problems arise during the test, recheck all electricalconnections and mechanicalhook ups.
WARNING
DO NOT
place wired hand set under or between objects. This may unintentionally pressthe buttons and may
cause injury or damage.
Side rail contr ol Wiredhand set
5 3 1
9
™ 1
2
3
4
5
6
6 4 2
8
7
8
9
10
CPR
11 12
FLAT