VitalGo Total-LiftBed VGTLB-HS User manual

Total-Lift Bed™VGTLB-HS
Operation Manual
(For detailed instructions, safety guidelines and warnings
please refer to the owner’s manual)
Please Note:
When reaching the end of the movement of each function (unless
stated dierently) two beeps will be heard as conrmation. All
Functions should be pressed continuously.
Memory Function:
Press button (8)-(M) followed by button (7) within 3 seconds, pressed for 2
seconds. a beep will be heard to inform new position was programmed.
Safety Note:
When the bed is in tilting position all other functions will not work except for
(10) & (12) (after unlock) for raising the bed to standing position and lower-
ing the bed from standing to at position.
Unlocking (Nurse Only!)
Press Buttons (11) and (12) together for 3 seconds until two beeps will
be heard.

S
U
NM
NO
CPR
Raising The
Back Rest
Raising The
Leg Rest
Lowering The
Back Rest
Lowering The
Leg Rest
Lowering the
Bed Horizontally
Seating with
Legs Up/Down
(Memory)
Memory Function:
Press rst and then
press Buttons (7)
Wheels Position:
Lower the Bed
and activate the
Wheels.
Raising the Bed to
Standing Position
(Should be
Unlocked rst)
Lowering from Tilt-
ing to Flat (Unlock
rst)
Raising the
Bed Horizontally
CPR Position