Vivax ACP-09CH25GEI User manual

ACP-09CH25GEI
ACP-12CH35GEI
RoHS
Service
manual
ENG

2
COOLING HEATING COOLING HEATING
730 800 1300/1110 1330/1175
1360 1390 1430 1470
3.53 3.86 5.95 6.39
3.20/3.42 2.88/3.38 3.00/3.21 3.38/3.40
Model of Indoor Unit
Fan Motor Speed (r/min) (H/M/L)
Output of Fan Motor (w)
Input of Heater (w)
Fan Motor Capacitor (uF)
Fan Motor RLA(A)
Fan Type-Piece
Diameter-Length (mm)
Evaporator
Pipe Diameter (mm)
Row-Fin Gap(mm)
Coil length (l) x height (H) x coil width
(L)
Swing Motor Model
Output ofSwing Motor (W)
Fuse (A)
Sound Pressure Level dB (A) (H/M/L)
Sound Power Level dB (A) (H/M/L)
Dimension (W/D/H)( mm)
Dimension ofPackage (W/D/H)( mm)
NetWeight /Gross Weight(kg)
52 /49 /48
830×189×285
900×265×385
11/15
Controller3.15 transformer0.2
42 /39 /38
4500/40003900/3560
2-1.4
681×324.3×38.1
MP28EA
2
Cross flow fan
φ92.1—616
Aluminum fin-copper tube ˄䪱ㅨ䪰
ㅵ˅
7
20
None
1
0.152
770X180X250
855X272X336
8.5/12.5
GWHD12A6NK3DA
1Ph – 220~240V
50Hz
550
1.6
GWHD12A6NK3DA/I
1250 /1100 /1050
2
Controller3.15 transformer0.2
40 /36 /33
50 /46 /43
7
2-1.4
580X228.6X25.4
MP24GA
Indoor
unit
GWHD09A3NK3DA/I
1160 /1010 /780
14
None
1
0.14
Cross flow fan
97-583
Aluminum fin-copper tube ˄䪱ㅨ䪰
ㅵ˅
450
Dehumidifying Volume (l/h) 1.2
C.O.P / EER (W/W) (High/Normal)
Power Input (W) (High/Normal)
Rated Input (W) (High/Normal)
Rated Current(A) (High/Norma)
Air Flow Volume (m3/h) (H/M/L)
Rated Frequency 50Hz
Total Capacity(W)
(High/Normal ) 3200/2500 4000/2700
Model GWHD09A3NK3DA
Function
Rated Voltage 1Ph – 220~240V
Specifications and Technical Parameters

Model of Outdoor Unit GWHD12A6NK3DA/O
CompressorModel EU1011DV
CompressorType Scroll
L.R.A. (A) 33.5
Compressor RLA(A) 4
Compressor Power Input(W) 628
Overload Protector 4CYC11233
Throttling Method Capillarythrottling
Starting Method Transducer starting
Working Temp Range (ć)-10ćİTİ43ć
Condenser Aluminum fin-copper tube
Pipe Diameter (mm) 9.52
Rows-Fin Gap(mm) 2-1.4
Coil length (l) x height (H) x coil
width (L) 645×508×44
Fan Motor Speed (rpm) (H/M/L) 830±20
Output ofFan Motor (W) 30
Fan Motor RLA(A) 0.3
Fan Motor Capacitor (uF) 2.5
Air Flow Volume ofOutdoor Unit /
Fan Type-Piece Axial fan-1
Fan Diameter (mm) 400
Defrosting Method Auto defrost
Climate Type T1
Isolation I
Moisture Protection IP24
Permissible Excessive Operating
Pressure for the Discharge
Side(MPa) 3.8
Permissible Excessive Operating
Pressure for the Suction
Side(MPa) 1.2
Sound Pressure Level dB (A)
(H/M/L) İ54
Sound Power Level dB (A) (H/M/L) İ64
Dimension (W/D/H)( mm) 848X260X540
Dimension of Package (W/D/H)(
mm) 878X360X610
NetWeight/Gross Weight(kg) 45/50
Refrigerant Charge (kg) R410A/1.2
Length (m) 4
Φ6(1/4”) Φ6(1/4”) Φ6(1/4”)
Φ12(1/2”) Φ12(1/2”) Φ12(1/2”)
55 5
10 10 10
İ64
R410A/1.2
45/50
878X360X610
848X260X540
Outdoor
unit
Connecti
on Pipe
Outer Diameter
MaxDistance
İ54
1.2
3.8
IP24
I
T1
Auto defrost
400
645×508×44
2-1.4
Axial fan-1
/
2.5
0.3
GWHD09A3NK3DA/O
Capillarythrottling
4CYC11233
628
4
4
Scroll
33.5
EU1011DV
9.52
Aluminum fin-copper tube
-10ćİTİ43ć
Transducer starting
30
830±20
The above data is subject to change without notice. Please refer to the nameplate of the unit.

COOLING HEATING COOLING HEATING
730 800 1300/1110 1330/1175
1360 1390 1430 1470
3.53 3.86 5.95 6.39
3.20/3.42 2.88/3.38 3.00/3.21 3.38/3.40
Model of Indoor Unit
Fan Motor Speed (r/min) (H/M/L)
Output of Fan Motor (w)
Input of Heater (w)
Fan Motor Capacitor (uF)
Fan Motor RLA(A)
Fan Type-Piece
Diameter-Length (mm)
Evaporator
Pipe Diameter (mm)
Row-Fin Gap(mm)
Coil length (l) x height (H) xcoil
width (L)
Swing Motor Model
Output of Swing Motor (W)
Fuse (A)
Sound Pressure Level dB (A)
(H/M/L)
Sound Power Level dB(A)
(H/M/L)
Dimension (W/D/H)( mm)
Dimension
of
Package
(W/D/H)(
mm)
NetWeight /Gross Weight(kg)
830×189×285
998×364×370
16/20
Aluminum fin-copper tube
˄䪱ㅨ䪰
ㅵ
˅
2
Controller3.15 transformer0.2
42 / 39 / 38
52 / 49 / 48
7
2-1.4
681×324.3×38.1
MP28EA
Cross flowfan
φ92.1—616
3900/3560 4500/4000
20
None
1
0.152
770X190X250
960X335X365
40 /36 /33
50 /46 /43
7
2-1.4
580X228.6X25.4
MP24GA
8.5/12.5
GWHD12A6NK3DB
220V-240V~
50Hz
550
1.6
GWHD12A6NK3DB/I
1250 /1100 /1050
2
Controller3.15 transformer0.2
Indoor
unit
GWHD09A3NK3DB/I
1160/1010 /780 14
None
1
0.14
Cross flow fan
97-583
Aluminum fin-copper tube
˄䪱ㅨ䪰
ㅵ
˅
450
Dehumidifying Volume (l/h) 1.2
C.O.P / EER (W/W) (High/Normal)
Power Input (W) (High/Normal)
Rated Input (W) (High/Normal)
Rated Current (A) (High/Normal )
Air Flow Volume (m3/h) (H/M/L)
Rated Frequency 50Hz
Total Capacity(W)
(High/Normal ) 3200/2500 4000/2700
Model GWHD09A3NK3DB
Function
Rated Voltage 1Ph – 220~240V

Model of Outdoor Unit GWHD12A6NK3DB/O
CompressorModel EU1011DV
CompressorType Scroll
L.R.A.(A) 33.5
Compressor RLA(A) 4
Compressor Power Input(W) 628
Overload Protector 4CYC11233
Throttling Method Capillarythrottling
Starting Method Transducer starting
Working Temp Range (ć)-10ćİTİ43ć
Condenser Aluminum fin-copper tube
Pipe Diameter (mm) 9.52
Rows-Fin Gap(mm) 2-1.4
Coil length (l)xheight(H) xcoil width (L) 645×508×44
Fan Motor Speed (rpm) (H/M/L) 830±20
Output ofFan Motor (W) 30
Fan Motor RLA(A) 0.3
Fan Motor Capacitor (uF) 2.5
Air Flow Volume ofOutdoor Unit /
Fan Type-Piece Axial fan-1
Fan Diameter (mm) 400
Defrosting Method Auto defrost
Climate Type T1
Isolation I
Moisture Protection IP24
Permissible Excessive Operating
Pressure for the Discharge Side(MPa) 3.8
Permissible Excessive Operating
Pressure for the Suction Side(MPa)
1.2
Sound Pressure Level dB (A) (H/M/L) İ54
Sound Power Level dB (A) (H/M/L) İ64
Dimension (W/D/H)( mm) 848X260X540
Dimension ofPackage (W/D/H)( mm) 878X360X610
NetWeight/Gross Weight(kg) 45/50
Refrigerant Charge (kg) R410A/1.25
Length (m) 4
Φ6(1/4”) Φ6(1/4”) Φ6(1/4”)
Φ12(1/2”) Φ12(1/2”) Φ12(1/2”)
55 5
10 10 10
EU1011DV
GWHD09A3NK3DB/O
4
628
4
33.5
Scroll
-10ćİTİ43ć
Capillarythrottling
Transducer starting
4CYC11233
645×508×44
9.52
2-1.4
Aluminum fin-copper tube
/
0.3
2.5
830±20
30
T1
I
Auto defrost
Axial fan-1
400
1.2
İ54
3.8
IP24
Outdoor
unit
Connecti
on Pipe Outer Diameter
MaxDistance
R410A/1.25
45/50
878X360X590
İ64
848X320X540
The above data is subject to change without notice. Please refer to the nameplate of the unit.

COOLING HEATING COOLING HEATING
3200/2550 4000/2900 4100/3500 4300/3850
1200/730 1400/820 1500/1084 1500/1067
1360 1400 1600 1650
6 6.2 7 7.2
2.67/3.49 2.86/3.54 2.73/3.23 2.87/3.61
Model of Indoor Unit
Fan Motor Speed (r/min) (H/M/L)
Output of Fan Motor (w)
Input of Heater (w)
Fan Motor Capacitor (uF)
Fan Motor RLA(A)
Fan Type-Piece
Diameter-Length (mm)
Evaporator
Pipe Diameter (mm)
Row-Fin Gap(mm)
Coil length (l) x height (H) x coil width
(L)
Swing Motor Model
Output of Swing Motor (W)
Fuse (A)
Sound Pressure Level dB (A) (H/M/L)
Sound Power Level dB (A) (H/M/L)
Dimension (W/D/H)( mm)
Dimension of Package (W/D/H)( mm)
Net Weight /Gross Weight (kg)
zH05ycneuqerFdetaR
Total Capacity(W)
Model ACP-09CH25GEI
Function V042~022–hP1egatloVdetaR
Power Input (W) (High/Normal)
Rated Input (W) (High/Normal)
Rated Current (A) (High/Norma)
Air Flow Volume (m3/h) (H/M/L) 450
2.1)h/l(emuloVgniyfidimuheD
C.O.P / EER (W/W) (High/Normal)
Indoor
unit
ACP-09CH25GEI/I
1160 /1010 /780
14
None
1
0.14
Cross flow fan
97-583
Aluminum fin-copper tube
7
2-1.4
580X228.6X25.4
MP24GA
2
Controller3.15 transformer0.2
40 / 36 / 33
50 / 46 / 43
770X180X250
855X272X330
8.5/12.5
ACP-12CH35GEI
1Ph – 220~240V
50Hz
550
1.6
ACP-12CH35GEI/I
1250 / 1100 / 1050
20
None
1
0.152
Cross flow fan
φ92.1—616
Aluminum fin-copper tube
7
Controller3.15 transformer0.2
42 / 39 / 38
2-1.4
681×324.3×38.1
MP28EA
2
52 / 49 / 48
830×189×285
900×265×385
11/14

Model ofOutdoor Unit ACP-12CH35GEI/O
BA1H290ZR6-CledoMrosserpmoC yrotorniwTepyTrosserpmoC
L.R.A. (A) 3329.3)A(ALRrosserpmoC 069)W(tupnIrewoProsserpmoC 33211CYC4rotcetorPdaolrevO gnilttorhtyrallipaCdohteMgnilttorhT gnitratsrecudsnarTdohteMgnitratS
Working Temp Range ( 51-) T 43 ebutreppoc-nifmunimulAresnednoC 25.9)mm(retemaiDepiP 4.1-2)mm(paGniF-swoR
Coil length (l) x height (H) x coil
width (L) 645×508×44
02±038)L/M/H()mpr(deepSrotoMnaF 03)W(rotoMnaFfotuptuO
Fan Motor RLA(A) 0.3
5.2)Fu(roticapaCrotoMnaF /tinUroodtuOfoemuloVwolFriA
Fan Type-Piece Axial fan-1
004)mm(retemaiDnaF tsorfedotuAdohteMgnitsorfeD
Climate Type T1
Isolation I 42PInoitcetorPerutsioM
Permissible Excessive Operating
Pressure for the Discharge
Side(MPa) 3.8
Permissible Excessive Operating
Pressure for the Suction
Side(MPa) 1.2
Sound Pressure Level dB (A)
(H/M/L) 55
Sound Power Level dB (A) (H/M/L) 65 045X062X848)mm()H/D/W(noisnemiD
Dimension of Package (W/D/H)(
mm) 878X360X610
44/04)gk(thgieWssorG/thgieWteN 72.1/A014R)gk(egrahCtnaregirfeR
Length (m) 4
Φ6(1/4”)
Φ12(1/2”)
5
10
Φ6(1/4”)
Φ12(1/2”)
5
10
64
R410A/ 1.2
40/44
878X360X590
848X320X540
Outdoor
unit
Connecti
on Pipe
Outer Diameter
MaxDistance
54
1.2
3.8
IP24
I
T1
Auto defrost
400
645×508×44
2-1.4
Axial fan-1
/
2.5
0.3
ACP-09CH25GEI/O
Capillarythrottling
Int11l-3979
960
3.92
4
Twin rotory
33
C-6RZ092H1AB
9.52
Aluminum fin-copper tube
-15 T 43
Transducer starting
30
830±20
The above data is subject to change without notice. Please refer to the nameplate of the unit.

COOLING HEATING COOLING HEATING
3300/2500 4000/2700 4100/3500 4300/3850
1250/730 1400/845 1500/1160 1560/1270
1360 1480 1600 1650
6.16.777.2
2.64/3.42 2.70/3.20 2.73/3.02 2.76/3.03
Model of Indoor Unit
Fan Motor Speed (r/min) (H/M/L)
Output of Fan Motor (w)
Input of Heater (w)
Fan Motor Capacitor (uF)
Fan Motor RLA(A)
Fan Type-Piece
Diameter-Length (mm)
Evaporator
Pipe Diameter (mm)
Row-Fin Gap(mm)
Coil length (l) x height (H) x coil width
(L)
Swing Motor Model
Output of Swing Motor (W)
Fuse (A)
Sound Pressure Level dB (A) (H/M/L)
Sound Power Level dB (A) (H/M/L)
Dimension (W/D/H)( mm)
Dimension ofPackage (W/D/H)( mm)
NetWeight /Gross Weight(kg)
52 /49 /48
830×189×285
998×364×370
16/20
Controller3.15 transformer0.2
42 /39 /38
2-1.4
681×324.3×38.1
MP28EA
2
Cross flow fan
φ92.1—616
Aluminum fin-copper tube
7
20
None
1
0.152
770X190X250
960X335X365
8.5/12.5
GWHD12A6NK3DD
1Ph – 220~240V
50Hz
550
1.6
GWHD12A6NK3DD /I
1250 /1100 /1050
2
Controller3.15 transformer0.2
40 /36 /33
50 /46 /43
7
2-1.4
580X228.6X25.4
MP24GA
Indoor
unit
GWHD09A3NK3DC/I
1160 /1010 /780
14
None
1
0.14
Cross flow fan
97-583
Aluminum fin-copper tube
490
Dehumidifying Volume (l/h) 1.2
C.O.P / EER (W/W) (High/Normal)
Power Input (W) (High/Normal)
Rated Input (W) (High/Normal)
Rated Current (A) (High/Norma)
Air Flow Volume (m
3
/h) (H/M/L)
Rated Frequency 50Hz
Total Capacity(W)
Model GWHD09A3NK3DC
Function
Rated Voltage 1Ph – 220~240V

Model of Outdoor Unit GWHD12A6NK3DD/O
Compressor Model C-6RZ092H1AB
Compressor Type Twin rotory
L.R.A. (A) 33
CompressorRLA(A) 3.92
Compressor Power Input(W) 960
Overload Protector Int11l-3979
Throttling Method Capillarythrottling
Starting Method Transducer starting
Working Temp Range (ć)-10
ćİTİ43ć
Condenser Aluminum fin-copper tube
Pipe Diameter (mm) 9.52
Rows-Fin Gap(mm) 2-1.4
Coil length (l) x height (H) x coil
width (L) 645×508×44
Fan Motor Speed (rpm) (H/M/L) 830±20
Output of Fan Motor (W) 30
Fan Motor RLA(A) 0.3
Fan Motor Capacitor (uF) 2.5
Air Flow Volume of Outdoor Unit /
Fan Type-Piece Axial fan-1
Fan Diameter (mm) 400
Defrosting Method Auto defrost
Climate Type T1
Isolation I
Moisture Protection IP24
Permissible Excessive Operating
Pressure for the Discharge
Side(MPa) 3.8
Permissible Excessive Operating
Pressure for the Suction
Side(MPa) 1.2
Sound Pressure Level dB (A)
(H/M/L) İ55
Sound Power Level dB (A) (H/M/L) İ65
Dimension (W/D/H)( mm) 848X260X540
Dimension of Package (W/D/H)(
mm) 878X360X590
NetWeight /Gross Weight(kg) 40/45
Refrigerant Charge (kg) R410A/1.27
Length (m) 4
Φ6(1/4”)
Φ12(1/2”)
5
10
4
Twin rotory
33
C-6RZ092H1AB
9.52
Aluminum fin-copper tube
-10ćİTİ43ć
Transducer starting
30
830±20
GWHD09A3NK3DC/O
Capillarythrottling
Int11l-3979
960
3.92
645×508×44
2-1.4
Axial fan-1
/
2.5
0.3
I
T1
Auto defrost
400
İ54
1.2
3.8
IP24
Outdoor
unit
Connecti
on Pipe
Outer Diameter
MaxDistance
İ64
R410A/1.2
40/44
878X360X590
848X320X540
Φ6(1/4”)
Φ12(1/2”)
5
10
The above data is subject to change without notice. Please refer to the nameplate of the unit.

3
ＧＲＥＥ
ＧＲＥＥ
Component Name
Indoor unit
Outdoor Unit
panel Air inlet Display
Wrapping Tape
Power
Guide Louver
Air outlet
Display window
Remote
plug
controller
set temperature
Air inlet
Air outlet
Connecting pipe
Connecting wire
Drainage Pipe
received window
remote control
coolingheating
power/run
fan
auto
Dehumidify

4Overall and Installing Dimension
Overall and Installing Dimension of Indoor Unit
Air inlet grill
Left Tube-exit Sign Right Tube-exit Sign
Top View
Rear View
Ceiling

Overall and Installing Dimension of Indoor Unit
Air inlet grill
Left Tube-exit Sign Right Tube-exit Sign
Top View
Rear View
Ceiling

Overall and Installing Dimension of Outdoor Unit
Handle
Bolt
Nut
Wrench
Over 600 Over 500
Over 300
Over 500
Unit: mm

55
55
5Electrical Diagram

ACP-09CH25GEI

+
-
L
0
00
+
-
L
0
00
ACP-12CH35GEI

66
66
6



Remote Controller Function Manual and Operating Instructions
Remote Controller Function Manual
This function manual is for D C Inverter LGW Series:
6.1.1 Temperature Parameters
Indoor preset temperature (Tpreset)
Indoor ambient temperature (Tamb.)
6.1.2 Basic Functions
Once energized, the compressor should in no way be restarted unless after 3-minute time interval at least.
6.1.2.1 Cooling Mode
6.1.2.1.1 Working Conditions and Process of Cooling
When Tamb.Tpreset COOL mode will act, the compressor and outdoor fan will run, and the indoor fan will run at the set speed.
When Tamb Tpreset-2 , the compressor will stop, the outdoor fan will delay 30 seconds to stop, and the indoor fan will
run at the set speed.
When Tpreset-2 Tamb Tpreset ,the unit will maintain its original operating status.
¾ Under this mode, the 4-way valve will be de-energized and the temperature can be set within a range from 16 to
30ć.
The unit will adjust the running frequency of the compressor automatically according to the change of ambient temperature.
Stop cooling
Start cooling
Original operating status
T
amb
Tpreset
Tpreset
Preset speed
Run Stop
Compressor
Outdoor fan
Indoor fan
3min.
6.1.2.1.2 Protection
 Antifreeze Protection
Under dehumidifying and cooling mode, after the compressor has run for about 10 minutes, if it is detected that the evaporator
tube temperature is too low, the compressor will stop, the outdoor fan will stop after 30s delay, the indoor fan and swing
motor will maintain their original operating status while under cooling mode, when under dehumidifying, the indoor fan will
run at low speed and the swing motor will maintain its original operating status. When antifreeze protection is released
and the compressor has stopped for 3 minutes, the complete unit will resume its original operating status.
During antifreeze protection
Compressor
Outdoor fan
Indoor fan
Run Stop
3min.
 Overcurrent Protection
If total current is high, the compressor will run in limited or dropped frequency. When total current goes on rising over the
specified value, the compressor will stop, the outdoor fan will delay 30 seconds to stop.
6.1.2.2 Dehumidifying Mode
6.1.2.2.1 Working Conditions and Process of Dehumidifying
When T amb.
> T
preset the unit will run under dehumidifying mode, in which case the compressor and outdoor fan will start
to run, the indoor fan will run at low speed.
When Tpreset -2 Tćamb.Tpreset , the unit will maintain its original operating status.
When Tamb.< Tpreset-2ć,the compressor will stop ,the outdoor fan will stop after 30s delay and the indoor fan will run at low speed.

¾ Under this mode, the reversal valve will be de-energized and the temperature can be set within a range from 16 to
30ć.
The unit will adjust the running frequency of the compressor automatically according to the change of ambient temperature.






Stop
Dehumidifying
Original operating status
Compressor
Outdoor fan
Indoor fan
Compressor
Outdoor fan
Indoor fan
Tpreset
Tpreset T
amb
low speed
Run
Run Stop
6.1.2.2.2 Protection
Protection is the sme as that under cooling mode.
6.1.2.3 Heating Mode
6.1.2.3.1 Working Conditions and Process of Heating
When T amb.Tpreset +2 , the unit will run under heating mode, in which case the reversal valve, compressor andć
outdoor fan will be simultaneously started, and the indoor fan will be started after 2minutes the latest.
When Tpreset +2 <Tćamb.<T
preset +5, the unit will maintain its original operating status.ć
blow for 60sec at the original speed and then stop.
When Tamb Tpreset+5 , the compressor will stop, the outdoor fan will delay 30 seconds to stop, and the indoor fan will
Under this mode, the temperature setting range is 16~30 .
The air conditioner will adjust the running frequency of the compressor automatically according to the change
of ambient temperature.
When the unit is turned off in HEAT mode, or switched to other mode from HEAT mode, the four-way valve
will be powered off 2min later after the compressor stops.
Reversal valve
Start heating
Stop heating
Original operating status
T
amb
Tpreset
Tpreset
Stop
3min.
2min. 2min.
6.1.2.3.2 The condition and process of defrosting
When frost is detected in the condenser, the system will enter into defrosting state. In which case the compressor
and indoor fan will stop, the outdoor fan will delay 30s to stop and then the four-way valve will stop 30s later. The
compressor will start again after 15s. After running for 7mins, the compressor will stop and then after 30s the four
fan will delay 2 minutes(max) to run and the temperature on the display panel shows H1.
-way valve will open and after another 60 seconds, the compressor and outdoor fan will resume running. The indoor
Under heating mode,when the compressor is stopped by malfunction, the indoor fan will blow at low fan speed for
60s and then stop.
6.1.2.3.3 Protection
 Overcurrent Protection
If total current is high, the compressor will run in limited or dropped frequency. When total current goes on rising over the
specified value, the compressor will stop, the outdoor fan will delay 30 seconds to stop.
6.1.2.4 FAN mode
In this mode, the indoor fan will run the fan in High, Med, Low and Auto mode. The compressor, outdoor fan and four-way
valve will stop.
In this mode, the temperature setting range is 16~30 .
The unit will adjust the running frequency of the compressor automatically according to the change of ambient temperature.