Vivo CHAIR-K04R User manual

Wooden Rocking Kneeling Chair
Instruction Manual
SKU: CHAIR-K04R
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/chair-k04r
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
ASSEMBLY STEPS
PACKAGE CONTENTS
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
A (x6)
Wood Dowel
Pin
B(x6)
Short Screw
C(x4)
Medium Screw
J (x1)
Front Frame
Support
K (x1)
Seat Pad
L (x1)
Knee Pad
D (x6)
Long Screw
E(x2)
Barrel Nut
F (x1)
Allen Wrench
G(x1)
Le Leg
H (x6)
Right Leg
I (x1)
Rear Frame
Support
STEP 1
Phillips
Screwdriver
250lbs
(113.40kg)
Insert wood dowel pins (A) into le and right legs
(G, H). For the front of each leg, insert a pin into the
front and back holes, and for the back of each leg,
insert a pin into the center hole.
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual.
Do not exceed weight capacity. Do not stand on this product. Do not place fingers under rockers. We cannot be liable for
damage or injury caused by improper mounting, incorrect assembly, or inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: THIS PRODUCT CAN RESTRICT CIRCULATION TO LEGS WITH PROLONGED USE.
CAUTION: USE ON A STABLE, LEVEL SURFACE.
WARNING!

3
STEP 2
STEP 3
Mount the seat pad (K) with the rounded
end facing forward to the assembled frame
using x4 short screws (B), and the knee pad
(L) with the larger end facing forward using
x2 short screws (B). Tighten all screws with
the Allen wrench (F).
STEP 4
Insert the barrel nuts (E) into the
holes underneath the front frame
support (J). Mount the front frame
support to the le leg (G) with a long
screw (D), making sure the large
end is facing forward. Mount the
rear frame support (I) to the le leg
with x2 medium screws (C), making
sure the large end is facing forward.
Assemble the right leg (H) to the
supports using a long screw (D) in
front and x2 medium screws (C) in
back. Tighten all screws with the
Allen wrench (F).
The chair is now ready for use.
Please note, the wood fibers may compress over
time as the chair is used, causing the screws to
loosen. The Allen wrench (F) should be kept
available to periodically re-tighten the screws.

LAST UPDATED: 07/15/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303