Vivo DESK-M2LCB User manual

Black 47" x 47" Corner Manual Height Adjustable Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-m2lcb
SKU: DESK-M2LCB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
88lbs
(40kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
TOOLS
NEEDED
Phillips
Screwdriver
PACKAGE CONTENTS
S-A (x39)
M5x16 Screw
S-B x12)
M6x8 Screw
S-C (x8)
Wooden Dowel
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: Extras of each screw size have been included
S-E (x8)
M6x35 Screw
T-B (x1)
4mm Allen Wrench
K (x4)
Foot Pad
S-G x20)
Anti-Vibration
Pad
T-A (x1)
2mm Allen Wrench
C(x1)
Le Support
Bar
D (x1)
Right Support
Bar
F x1)
Right Leg
E(x1)
Le Leg
L(x1)
Sync Rod
J (x2)
Foot
N (x1)
Cable Tray
B (x4)
Connector
Plate
M (x1)
Crank Handle
Drill
A(x1)
Desktop
Panel Set
T-C (x1)
5mm Allen Wrench
S-F (x6)
M6x10 Screws
G (x1)
Le Side Bracket
H (x1)
Right Side Bracket
I (x1)
Support Bar
Connector
S-D (x4)
M8x47 Screw

3
ASSEMBLY STEPS
STEP 1
Place Desktop Panel Set (A) upside down on a flat surface, then assemble using Wooden Dowels (S-C).
Mount Connector Plates (B) with M5x16 Screws (S-A) and a Phillips screwdriver.
STEP 2
Assemble Le Support Bar (C) to Le Leg (E) and Right Support Bar (D) to Right Leg (F) using M8x47
Screws (S-D). Tighten with 5mm Allen Wrench (T-C).
C
E
F
DT-C
A
B
S-A
S-C

4
STEP 3
STEP 4
Attach Le Side Bracket (G) to Le Leg (E) and Right Side Bracket (H) to Right Leg (F) using M6x10mm
Screws (S-F). Tighten with 4mm Allen Wrench (T-B).
Attach Support Bar Connector (I) to Le Support Bar (C) and Right Support Bar (D) using M6x8 Screws
(S-B) and 4mm Allen Wrench (T-B).
C
E
D
F
G
H
S-F
T-B
T-B
IS-B
C
D

5
STEP 5
Install Feet (J) on the legs as shown using M6x35 Screws (S-E) and 5mm Allen Wrench (T-C). Screw
Foot Pads (K) into Feet (J).
STEP 6
Loosen the nut on Sync Rod (L) and insert the hex rod end into
Le Leg (E). While holding the hex end, pull the larger rod out
until the connector engages with Right Leg (F). Tighten the set
screw on Sync Rod (L) using 2mm Allen Wrench (T-A), then
tighten the nut.
J
S-E
T-C
K
L
E
F
T-A
1
2
3
4

6
STEP 7
STEP 8
Insert Crank Handle (M) into Right Leg (F) then mount Crank Handle (M) to Right Side Bracket (H)
using M6x8 Screws (S-B) and 4mm Allen Wrench (T-B). Insert Anti-Vibration Pads (S-G) into Le Side
Bracket (G), Right Side Bracket (H) and Support Bar Connector (I).
T-B
S-B
H
M
F
S-G
Assemble the handle
Mount desk frame assembly and Cable Tray (N) to predrilled holes in the desktop assembly using
M5x16 Screws (S-A) and a Phillips screwdriver.
N
S-A
I

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
Carefully turn the desk right side up and adjust the height using Crank Handle (M). If necessary, adjust
foot pads (K) to level the desk.
STEP 9
M
K

LAST UPDATED: 07/20/2021
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303