Vivo DESK-GM48BG User manual

Black 48” x 24” Gaming Desk with RGB Lighting
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-gm48bg
SKU: DESK-GM48BG
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualied technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specied in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
WARNING!
TOOLS NEEDED
Phillips
Screwdriver
PACKAGE CONTENTS
A (x1)
Desktop
B (x1)
Le Leg
D (x1)
Le Crossbar
E (x1)
Right Crossbar
F (x1)
Hook
C (x1)
Right Leg
G (x1)
Cup Holder
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
H (x1)
Cable Cover
S-A (x4)
ST3.5x20 Screw
S-B (x5)
ST4.2x14 Screw
S-C (x16)
M6x16 Screw
S-D (x6)
Cable Clip
S-E (x1)
Magnet
T-A (x1)
Allen Wrench
220lbs
(100kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
I (x1)
Power Cable
J (x1)
Remote

3
ASSEMBLY STEPS
STEP 1
Place Desktop (A) upside down on a at surface and place Le Leg (B) and Right Leg (C)
over mounting holes in Desktop (A). Secure using M6x16 Screws (S-C) and Allen Wrench
(T-A).
A
B
C
S-C
T-A

4
STEP 2
Mount Le Crossbar (D) to Le Leg (B) and Right Crossbar (E) to Right Leg (C), and secure
the other end to Desktop (A) using M6x16 Screws (S-C) and Allen Wrench (T-A).
B
C
D
E
A
T-A
D
S-C

5
STEP 3
Stick Cable Clips (S-D) along the backside of the desk in desired locations. Mount Hook (F)
and Cup Holder (G) to predrilled holes on eith side of Desktop (A) using ST4.2x14 Screws
(S-B) and a phillips screwdriver.
S-D
F
G
A
S-B
Insert Power Cable (I) into Desktop (A).
A
STEP 4
I

6
STEP 5
3
Mount Cable Cover (H) to Desktop (A) using ST3.5x20 Screws (S-A) and a phillips
screwdriver. Connect Power Cable (I) to USB wall charger, or other device.
NOTE: Power Cable (I) can be routed through either slot on Cable Cover (H).
H
A
S-A
I

7
3
STEP 6
Peel and stick Magnet (S-E) to the back of Remote (J) and secure to desk frame assembly.
If necessary, the foot pads can be adjusted to level the desk assembly.
J
S-E

LAST UPDATED: 02/21/2022
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303