Vivo DESK-V101M User manual

Crank Height Adjustable Desk Frame - Black
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v101m
SKU: DESK-V101M
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
PACKAGE CONTENTS
WARNING!
A (x1)
Telescopic
Crossbar
TOOLS NEEDED
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
154lbs
70kg
F (x1)
Sync Rod
D (x2)
Side Bracket
E (x2)
Foot
B (x1)
Leg
C (x1)
Leg with Gearbox
Level
S-A (x16)
M6x12 Screw
S-B (x4)
3/4” Screw
S-C (x10)
7/8” Screw
T-A (x1)
Allen Wrench
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
G (x1)
Crank Handle
Drill

3
STEP 2
With the desktop mounting holes facing inwards as shown below, attach the Side Brackets (D) to both
ends of the frame using M6x12mm Screws (S-A). Tighten with the Allen Wrench (T-A).
ASSEMBLY STEPS
STEP 1
Loosen the two set screws on the Telescopic Crossbar (A) using the Allen Wrench (T-A). Adjust the
Telescopic Crossbar (A) length to suit the desktop. Attach the Telescopic Crossbar (A) to Legs (B, C) as
shown using M6x12mm Screws (S-A),and tighten with the Allen Wrench (T-A). Retighten set screws.
NOTE: Make sure adjusted length of the telescopic crossbar is no more than 61" (155cm).
pJ^
A
T-A BC
S-A
D
S-A T-A

4
STEP 3
Place the Feet (E) on the Legs (B, C) as shown. Insert and tighten M6x12 Screws (S-A) using the Allen
Wrench (T-A).
S-A
E
B
C
S-A
T-A

5
STEP 4
Position the frame upright. Loosen the knobs on the Sync Rod (F) and extend the hex sha. Insert hex
sha into the Leg (B), then while holding the hex sha with one hand, extend sync rod onto the sha of
the Leg With Gearbox (C). Tighten both knobs.
CAUTION: To avoid injury, at least two people should turn the frame upright.
knob
NO P
123
F
B
C

6
STEP 5
If you are using a VIVO desktop, Refer to the
manual that came with your desktop.
If you are not using a VIVO desktop, place the
desktop on the frame, mark and then drill pilot
holes using a 3/32” or 3mm bit, and drill holes to
a depth of 3/8” (10mm). Then secure the desktop
using the ⅞” screws (S-C).
Insert the Crank Handle (G) into the gearbox as shown, and using the Crank Handle (G) mounting
bracket, mark drilling locations with a pencil. Drill 3/8” (10mm) deep pilot holes under the desktop
with a 5/64” (or 2mm) drill bit. Secure the mounting bracket to the underside of the desk using 3/4”
Screws (S-B).
pJ_
S-C
G
S-B
STEP 6

7
If necessary, adjust foot pads to level desk.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk weight limit. Keep area of vertical motion free of
obstacles.
Keep weight on desk balanced for
correct operation and longer life of
components.
Leave enough slack in cables to
allow for full range of vertical
motion.
STEP 7

LAST UPDATED: 04/1/2021
REV2.1
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303