Vivo DESK-E1L94W User manual

White 47" x 47" Corner Electric Desk
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-e1l94b
SKU: DESK-E1L94W
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
154lbs
(70kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
PACKAGE CONTENTS
S-A (x42)
M5x16mm
Screw
S-B 14)
M6x11mm
Screw
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC SHOCK, PLEASE READ THE FOLLOWING
INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: Extras of some hardware included.
T-A (x1)
2mm Allen
Wrench
I (x1)
Shelf
J (x1)
Right Leg
P (x2)
Shelf Brackets
T x16)
Anti-Vibration Pad
C(x1)
Right Panel
D (x1)
Sync Rod
G x1)
Right Crossbar
F(x1)
Le Crossbar
K(x1)
Le Leg
H(x1)
Crossbar Connector
L (x1)
Le Side Bracket
B (x1)
Middle Panel
E (x4)
Connecting Plate
M (x1)
Right Side Bracket
N (x1)
AC Adapter
O (x1)
Control Panel
TOOLS NEEDED
Phillips
Screwdriver
Drill
S-C (x8)
M6x35mm
Screw
S-D (x2)
M8x16mm
Screw
Q (x2)
Hook
R (x2)
Foot Extension
S (x2)
Foot
V (x2)
Cable Management Cover
U (x2)
Cable Clips
A (x1)
Le Panel
T-B (x1)
5mm Allen
Wrench

3
ASSEMBLY STEPS
STEP 1
Assemble Le Crossbar (F) to Le Leg (K) and Right Crossbar (G) to Right Leg (J) using M6x11mm
Screws (S-B) and 5mm Allen Wrench (T-B).
STEP 2
Mount Le Side Bracket (L) to Le Leg (K) and Right Side Bracket (M) to Right Leg (J) using M6x11mm
Screws (S-B) and 5mm Allen Wrench (T-B).
J
J
S-B
T-B
K
M
L
G
F
S-B
T-B K
STEP 3
Connect Feet (S) to Right Leg (J) and Le Leg (K) using M6x35mm Screws (S-C) and 5mm Allen Wrench
(T-B). Feet are installed oset, with the longer ends lining up with Side Brackets (L, M).
S
J
K
L
M
S-C
T-B

4
STEP 4
STEP 5
Flip assembly over. Loosen the knob on Sync Rod (D) and extend the hex sha.
Insert the hex sha into Le Leg (K), making sure the metal retaining ring makes
contact with the leg. While holding the hex sha with one hand, extend Sync Rod
(D) onto the spline sha of Right Leg (J). Tighten the set screw on Sync Rod (D)
using 2mm Allen Wrench (T-A). Retighten the knob.
Use Crossbar Connector (H) to connect Le Crossbar (F) and Right Crossbar (G) using M6x11mm Screws
(S-B) and 5mm Allen Wrench (T-B).
T-A
1
2
3
4
T-B
S-B
H
G
F
K
D
J

5
STEP 6
Insert Anti-Vibration Pads (T) into the frame assembly as shown below.
T
STEP 7
Assemble Le Panel (A), Middle Panel (B), and Right Panel (C) using Connecting Plates (E) with
M5x16mm Screws (S-A), and a Phillips screwdriver.
C
B
A
S-A
E

6
Attach desk frame assembly to desktop assembly using M5x16mm Screws (S-A) and a Phillips
screwdriver. Next, attach Shelf Brackets (P), Hooks (Q), and Control Panel (O) to desktop using M5x16mm
Screws (S-A) and a Phillips screwdriver.
S-A
P
Q
O
STEP 8
STEP 9
Connect AC Adapter (N) and the cable from Right Leg (J) to Control Panel (O). Remove Use Cable Clips
(U) to manage cables.
U
N
O
J
S-A
S-A
S-A

7
STEP 10
Turn desk assembly over and hook Shelf (I) onto Shelf Brackets (P). Place Cable Management Covers (V)
into desktop holes, as shown below.
SR
T-B
S-D
I
P
V
STEP 11
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
For added stability, Foot Extensions (R)
can be added to the back of Feet (S). To
do, remove the pads from the Feet (S), as
shown below. Install Foot Extensions (R)
with M8x16mm Screws (S-D) and 5mm Allen
Wrench (T-B).

LAST UPDATED: 09/27/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303