Vivo DESK-V042KW User manual

White Desk Riser
Instruction Manual
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Scan the QR code with your mobile device or follow the link
for helpful videos and specications related to this product.
https://vivo-us.com/products/desk-v000k
SKU: DESK-V042KW

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualied technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specied in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
PACKAGE CONTENTS
33lbs
(15kg)
ASSEMBLY STEPS
STEP 1
Apply Pads (D) to underside of Keyboard Tray (B). Assemble Stopper (C) to Kayboard Tray (B) using
ST4.2x12mm Screws (S-A) and a Phillips screwdriver.
WARNING!
A (x1)
Desk
B (x1)
Keyboard Tray
S-A (x2)
ST4.2x12mm Screw
F (x2)
Cable Clip
D (x3)
Pad
E (x4)
Rubber Feet
TOOLS NEEDED
Scissors
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Phillips
Screwdriver
STEP 2
Install Rubber Feet (E)
to the bottom of Desk
(A). Then cut the large
shipping tie.
NOTE: DO NOT squeeze
the handle on Desk
(A) while cutting the
shipping tie.
DESKTOP
4.4lbs
(2kg)
KEYBOARD TRAY
C (x1)
Stopper
S-B (x4)
M5x10mm Screw
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
DO NOT place hands on or near support bars.
Moving parts can crush and cut. Pinch points
are created during liing and lowering the work
surface. Failure to follow these instructions may
result in serious personal injury.
WARNING: PINCH POINT
E
A
DB
C
S-A

3
STEP 3
Apply Cable Clips (F) to underside of Desk (A).
STEP 5
STEP 6
Raise Desk (A) by liing the handle on
the right side of the frame.
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
STEP 4
Place Keyboard Tray (B) on the metal brackets on
Desk (A). Secure Keyboard Tray (B) to brackets using
M5x10mm Screws (S-B) and tighten with a Phillips
screwdriver.
If installing a monitor mount,
remove the plug from the
desktop, then secure the
mount using grommet
mounting hardware included
with your monitor mount.
A
B
S-B
A
A
F

LAST UPDATED: 09/23/2022
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303