Vivo DESK-V122EB User manual

Black Electric Dual Motor Desk Frame
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v122eb
SKU: DESK-V122EB
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
220lbs
(100kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
PACKAGE CONTENTS
A (x1)
Le Crossbar
B x1)
Right Crossbar
C(x2)
Foot
D(x2)
Leg
F (x2)
Side Bracket
G (x1)
Crossbar
K(x1)
AC Adapter
ELECTRICAL SAFETY INSTRUCTIONS
THIS PRODUCT IS POWERED BY ELECTRICITY. IN ORDER TO AVOID BURNS, FIRE AND ELECTRIC
SHOCK, PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY.
• DO NOT CLEAN PRODUCT WHILE POWER IS CONNECTED.
• DO NOT DISASSEMBLE OR REPLACE COMPONENTS WHILE POWER IS CONNECTED.
• NEVER OPERATE THE SYSTEM WITH A DAMAGED CORD OR PLUG. PLEASE CONTACT YOUR
SELLER TO REPLACE DAMAGED PARTS.
• NEVER OPERATE SYSTEM IN DAMP ENVIRONMENTS OR IF ANY ELECTRICAL COMPONENTS HAVE
MADE CONTACT WITH LIQUIDS.
• ALTERATIONS OF THE GIVEN POWER UNIT ARE NOT ALLOWED.
• OUTDOOR USE IS PROHIBITED.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
L (x5)
Cable Clip
NOTE: x2 extras of each screw size have been included.
E(x4)
Foot Pad
H (x12)
Rubber Pad
I(x1)
Control
Panel
J(x1)
Extension
Cable
S-A (x10)
M6x12 Flat
Head Screw
T-A (x1)
4mm Allen
Wrench
S-B (x8)
M6x35 Screw
S-C (x6)
M6x12 Screw
S-D (x16)
M5x16 Screw

3
TOOLS NEEDED
Phillips
Screwdriver
Drill
F
D
C
C
J
K
I
AB
GF
D
ASSEMBLY STEPS
Attach Le Crossbar (A) and Right Crossbar (B) to Legs (D) using M6x12 Flat Head Screws (S-A) and
4mm Allen Wrench (T-A).
STEP 1
AB
D
S-A
B
S-A
T-A

4
Insert Rubber Pads (H) into desktop mounting holes in Le Crossbar (A), Right Crossbar (B), and Side
Brackets (F).
STEP 2
STEP 3
Secure Side Brackets (F) using M6x12 Flat Head Screws (S-A) and 4mm Allen Wrench (T-A).
H
H
AB
F

5
E
STEP 4
Flip leg assemblies upside down and place the Feet (C) on Legs (D) as shown. Insert and tighten M6x35
Screws (S-B) using 4mm Allen Wrench (T-A). Screw Foot Pads (E) into Feet (C).
STEP 5
Insert Crossbar (G) into Le Crossbar (A) and Right Crossbar (B). Adjust the desk frame assembly to the
desired length and then insert M6x12 Screws (S-C) into Le Crossbar (A) and Right Crossbar (B). Tighten
using 4mm Allen Wrench (T-A).
C
D
S-B
S-B
E
E
T-A
G
A
B
S-C
T-A
S-C

6
Place the assembled frame upside down on the tabletop. Adjust width as needed, and drill 10mm deep
pilot holes using a 1/8” (3mm) drill bit. Secure the frame to the tabletop using M5x16 Screws (S-D).
Tighten with a Phillips screwdriver.
STEP 7
D
STEP 6
Place Control Panel (I) at the desired location, making sure the cables from one Leg (D) and Extension
Cable (J) are able to reach the Control Panel (I), and mark drilling locations. Drill 10mm deep pilot
holes using a 1/8” (3mm) drill bit, then mount Control Panel (I) using x8 M5x16 Screws (S-D). Tighten
all screws with a Phillips screwdriver. Connect Extension Cable (J) to the Leg (D) opposite from Control
Panel (I), then connect all cables to Control Panel (I). Connect AC Adapter (K) to Control Panel (I).
S-D
S-D

7
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
Do not exceed desk
weight limit.
Keep area of vertical
motion free of
obstacles.
Keep weight on desk
balanced for correct
operation and longer
life of components.
Leave enough slack in
cables to allow for full
range of vertical motion.
STEP 8
Turn the desk right side up and plug AC Adapter (K) into an AC power outlet. Manage cables using Cable
Clips (L). Adjust Foot Pads (E) to sit level if necessary. Refer to Controller User Guide for operational
instructions.
L
E

LAST UPDATED: 05/10/2021
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303