Vivo DESK-GMZ1R User manual

Z-Shaped 47” Gaming Desk with LED Lights
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-gmz1r
SKU: DESK-GMZ1R
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual and do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly, or
inappropriate use.
WARNING!
TOOLS NEEDED
Phillips
Screwdriver
Level
NOTE: SOME HARDWARE MAY NOT BE USED
PACKAGE CONTENTS
A (x4)
Cable
Grommet
B (x4)
Adjustable Foot
D (x6)
M6x12
E (x2)
Knob
F (x2)
Cable Tie
C (x4)
Cable Clip
G (x4)
Decorative Cover
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
H (x1)
Power
Adapter
1 (x1)
Tabletop
2 (x1)
Le Leg
3 (x1)
Right Leg
4 (x1)
Crossbar
5 (x1)
Plug Board
Holder
6 (x1)
Bale I (x1)
Allen Wrench
176.4lbs
(80kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.

3
ASSEMBLY STEPS
STEP 1
×4
×4
A
B
STEP 2
Insert cable grommets (A) into holes
in legs (2, 3). Screw adjustable feet
(B) into underside of legs.
Fit pre-installed bolts on crossbar (4)
into slots on tops of legs as shown.
Insert M6x12 bolts (D) into lower holes
of crossbar, then tighten all bolts with
the Allen wrench (I).

4
STEP 3
STEP 4
1
Connect cables on decorative covers (G) to cables in legs. Insert tabs of decorative covers
into “keyholes” and press down to secure.
Place tabletop (1) on assembled frame (do not engage security pins at this time).
Connect cables from tabletop to cables in legs.

5
STEP 5
Hang power strip/UPS holder (5) and cable clips (C) on crossbar, being careful not to stretch
and damage power cables. Align tabletop security pins with legs and support bar. Press
security pins through holes to secure tabletop to frame.
(NOTE: Desk shown upside down.)

6
STEP 6
3
Insert knobs (E) through holes in crossbar and tighten into tabletop.

7
3
STEP 7
Install bale (6) to tabletop using M6x12 bolts (D) and tighten with the Allen wrench
(I). Connect power adapter (H) to desk and plug into AC power outlet. If needed, turn
adjustable feet to sit level.
6
×2
D
H

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303