Vivo CART-WB48A User manual

48” x 32” Mobile Double Sided Whiteboard
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/cart-wb48a
SKU: CART-WB48A
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Board
B(x2)
Vertical Support
C(x2)
Feet
D (x1)
Base Support
E (x1)
Mid Supprt
F (x1)
Marker Tray
G (x1)
Rotation Lock
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual. Do
not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect assembly
or inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF CART.
• USE TIPOVER RESTRAINT OR ANCHOR CART TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
ASSEMBLY STEPS
H (x4)
Caster
I (x1)
5mm Allen Wrench
J(x1)
Wrench
K(x2)
Pole Cap
L (x8)
Bolt Cap
M (x12)
M6x30mm Bolt
N (x4)
M4x16mm Screw
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
STEP 1
Fasten casters (H) to feet (C) using the wrench (J). Install feet to vertical supports (B) using M6x30mm
bolts (M) and tighten with the 5mm Allen Wrench (I).

3
STEP 2
STEP 3
STEP 4
CLEANING TIP: A mild dish washing liquid can be used with a so cloth to clean the surface.
Fasten mid support (E) and base support (D) to vertical supports using M6x30mm bolts
(M). Tighten with the 5mm Allen Wrench (I). Press the bolt caps (L) into holes to cover
bolts. Assemble marker tray (F) to mid support using a M4x16 screw (N) at each end. Attach
rotation lock (G) to marker tray and mid support using M4x16 screws. Tighten all screws
with a Phillips screwdriver.
Slide board (A) into frame. Cover open ends of
vertical supports using pole caps (K).
Push the rotation lock down to release and rotate board.

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303