Vivo PP-2-G060C User manual

Frosted Clamp-on Desk Privacy Panels (x2)
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/pp-2-g060c
SKU: PP-2-G060C
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x2)
Panel
B(x4)
Clamp
C(x8)
Pad
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE MAY NOT BE USED
TOOLS NEEDED
Phillips
Screwdriver
D(x8)
ST3.9x25
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
E (x4)
M6x12
F(x4)
M6x25
G(x4)
M6x40
H(x8)
Plastic Pad
I (x2)
Allen Wrench

3
ASSEMBLY STEPS
STEP 1
Separate the clamps (B) into separate components.
STEP 2
Apply the pads (C) to the underside of each clamp.

4
STEP 3
Place the plastic pads (H) on the inner face of each upper clamp component.
STEP 4a
OPTION A: 3/4” - 1” (18mm - 25mm) Desktop
Attach the lower clamp components to the underside of the desk edge using
ST3.9x25 self-tapping screws (D) (NOTE: For correct fit, the space between
the clamps must be no more than 18” [455mm]). Slide the upper clamp
components onto the lower clamps, and secure using the M6x25mm bolts (F)
and Allen wrench (I).

5
STEP 4b
OPTION B: 1” - 2” (25mm - 50mm) Desktop
Slide the upper clamp components onto the lower clamps, and partially
insert M6x25mm bolts (F) or M6x40mm bolts (G) depending on the desktop
thickness. Place the clamps on the edge of the desk, and tighten using the
Allen wrench (I). (NOTE: For correct fit, the space between the clamps must
be no more than 18” [455mm]).

6
STEP 5
Slide the front clamp components onto the upper clamps.
STEP 6
Place the panels (A) into the clamps, making sure the panels are fit between the
plastic pads.

7
STEP 7
Insert the M6x12mm bolts (E) into the front clamps, and tighten with the Allen wrench (I).

LAST UPDATED: 01/27/2022
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303