Vivo PP-1-V060G/D User manual

60” x 24” Clamp-on Desk Privacy Panel
Instruction Manual
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
https://vivo-us.com/products/pp-1-v060g
SKU: PP-1-V060G/D
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
TOOLS NEEDED
WARNING!
Phillips
Screwdriver
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
PACKAGE CONTENTS
B (x2)
Clamp S-A (x4)
Spacer
S-B (x4)
Washer
S-C (x4)
M6x30mm
Screw
S-D (x4)
M6x40mm
Screw
A(x1)
Panel

3
ABOVE DESK ASSEMBLY
STEP 1
OPTION A: Flush Fit
Attach Clamps (B) to Panel (A) using M6x30mm Screws (S-C) and Washers (S-B). Tighten with a
Phillips screwdriver.
OPTION B: Gap-Fit for Cables and Devices
Attach Clamps (B) to Panel (A) using M6x40mm Screws (S-D), Washers (S-B) and Spacers (S-
A). Tighten with a Phillips screwdriver.
B
S-D
S-B
B
A
A
S-CS-B
S-A

4
Place the assembled panel on the edge of the desk, and tighten the clamps to secure.
NOTE: Over-tightening the clamps will cause the panel to lean forwards.
STEP 2

5
BELOW DESK ASSEMBLY
STEP 1
OPTION A: Flush Fit
Attach Clamps (B) to Panel (A) using M6x30mm Screws (S-C) and Washers (S-B). Tighten with a
Phillips screwdriver.
OPTION B: Gap-Fit for Cables and Devices
Attach Clamps (B) to Panel (A) using M6x40mm Screws (S-D), Washers (S-B) and Spacers (S-
A). Tighten with a Phillips screwdriver.
B
A
S-C
S-B
B
A
S-D
S-B
S-A

6
Place the assembled panel on the edge of the desk, and tighten the clamps to secure.
NOTE: Over-tightening the clamps will cause the panel to lean forwards.
STEP 2

7
[ THIS PAGE INTENTIONALLY LEFT BLANK ]

LAST UPDATED: 08/16/2023
REV1.1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303