Vivo DESK-V000KW User manual

White 32” Desk Riser
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/desk-v000kw
SKU: DESK-V000KW
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
If you do not understand these directions, or if you have any doubts about the safety of the installation,
please call a qualified technician. Check carefully to make sure there are no missing or defective parts.
Improper installation may cause damage or serious injury. Do not use this product for any purpose that is
not explicitly specified in this manual and do not exceed weight capacity. We cannot be liable for damage
or injury caused by improper mounting, incorrect assembly, or inappropriate use.
PACKAGE CONTENTS
33 lbs
(14.97kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
ASSEMBLY STEPS
STEP 1
Separate the sleeve nut (C) into C1 and C2.
STEP 2
Press C1 into holes on top of keyboard tray (B).
Apply pads (E) to underside of keyboard tray.
WARNING!
A (x1)
Adjustable
Desk
B(x1)
Keyboard
Tray
C(x4)
Sleeve Nut
D (x2)
Cable Clip
E (x3)
Pad
F (x4)
Rubber Feet
TOOLS NEEDED
Scissors
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
Phillips
Screwdriver
C
C1 C2
E
C1
B
STEP 3
Cut the large plastic tie beneath
desk (A). Raise the desk by
squeezing the handles underneath
the desk. Cut the four plastic ties
on the base of the desk.
A
F

3
STEP 4
Apply cable clips (D) to underside of desk.
STEP 6
STEP 7
Raise the desk by squeezing the handles
underneath the desk. Cut the four plastic
ties on the base of the desk.
Raise desktop
slowly to keep
items stable.
Keep monitor and
laptop base fully on
the desktop.
Leave enough slack
in cable to allow for
full range of vertical
motion (15” / 38 cm).
Follow the cable
routing instructions to
avoid the potential to
pinch cables.
CAUTION!
Failure to follow these instructions may result in property damage and/or personal injury.
STEP 5
Place keyboard tray (B) on metal brackets on
desk (A). Secure keyboard tray to brackets
using screws (C2) and tighten with a Phillips
screwdriver.
C2
D
1
2
3
If installing a monitor mount,
remove the plug from the
desktop, then secure the mount
using grommet mounting
hardware included with your
monitor mount.
Place keyboard, monitor and
other items on top of desk.

LAST UPDATED: 03/04/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303