Vivo MOUNT-M-FD37 User manual

  
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
- -   
 
phillips screwdriver
 
1
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
 (x1)
Mount
 (x1)
4mm Allen
Wrench
 (x1)
6mm Allen
Wrench
-  (x2)
D6 Washer
-  (x4)
Screw
-   (x4)
Anchor
-  (x4)
M6x14
-   (x4)
M8x20
-  (x4)
M4x14
-   (x4)
M5x14
- (x8)
- ! (x4)
D5
-   (x4)
D8
- - -"#$$%% &'$#$' ' (

')* +#
2
+# ,
+# -
Remove two bolts from mount (A) with 4mm Allen wrench (B) as
shown in diagram. Separate VESA plate from mount.
Push arm against ceiling plate of mount (A) to release lock and
pull the arm down.
+# 
# 
$*. 
#  $ 
Hold mount (A) to
mounting surface and
mark drill holes with
pencil. Drill 2.2"
( mm) deep holes
using a 3/16" (4. mm)
drill bit. Insert screws
(W-A) into front two
holes, leaving 3mm of
thread exposed. Slide
mount onto front two
screws. Insert screws
(W-A) with washer (W-
C) into back two holes.
Tighten all screws.
Hold mount (A) to
mounting surface and
mark drill holes with
pencil. Drill 2.4"
(60mm) deep holes
using a 3/8" (10mm)
drill bit. Insert anchors
(W-B). Insert screws (W-
A) into front two holes,
leaving 3mm of thread
exposed. Slide mount
onto front two screws.
Insert screws (W-A)
with washer (W-C) into
back two holes. Tighten
all screws.

+# / 01
+# 2
Adjust swivel hinge by removing plastic caps and turning bolts
underneath with 6mm Allen wrench (C). Adjust TV height by
loosening bolts with 4mm Allen wrench (B), then tighten at desired
height.
+# 3
+# /
Mount detached VESA plate to TV
with screws (M-A, M-B, M-C, or M-D),
washers (M-E or M-F) and spacers
(M-G) depending on your TV's needs
as shown in diagrams.
Slide TV onto mount (A). Replace previously removed bolts and
tighten with 4mm allen wrench (B).
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
+(* 
  
Last updated: 0 /23/18
4  
4