Vivo MOUNT-SONOS4R User manual

Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
SKU: MOUNT-SONOS4R
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST
Wall Mount Designed for Sonos Ray Soundbar
https://vivo-us.com/products/mount-sonos4r

2
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no missing or defective parts. Improper installation may
cause damage or serious injury. Do not use this product for any purpose that is not explicitly specified in this manual
and do not exceed weight capacity. We cannot be liable for damage or injury caused by improper mounting, incorrect
assembly, or inappropriate use.
PACKAGE CONTENTS
T-A (x1)
Bubble Level
A (x1)
Mount
M-A (x2)
M5x10mm
Screw
W-A (x2)
ST4.8x38mm
Screw
W-B (x2)
ST3.5x50mm
Screw
W-C (x2)
Drywall
Anchor
W-D (x2)
Concrete
Anchor
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
WARNING: CHOKING HAZARD
IMPORTANT NOTE:
PRE-ASSEMBLY
Measure installation height (1) before beginning installation. Ensure that there is at least 3.5” (89mm)
available below TV. When mounting the bracket, align the mounting hole locations on the bracket
with the bottom of your TV.
TOOLS NEEDED
Phillips
Screwdriver
Drill Pencil
1
1
1

3
ASSEMBLY STEPS
STEP 1a - Wood Installation
Hold Mount (A) up to the wall in your desired mounting location. Using Bubble Level (T-A) and a
pencil, mark mounting hole locations.
Drill 1.5” (38mm) deep holes using a ⅛” (3mm) drill bit.
Install Mount (A) to the wall using ST4.8x38mm Screws (W-A) and a Phillips screwdriver.
W-A
T-A
A
A

4
STEP 1b - Drywall Installation
Hold Mount (A) up to the wall in your desired mounting location. Using Bubble Level (T-A) and a
pencil, mark mounting hole locations.
Drill completely through the drywall using a 5/16” (8mm) drill bit.
Insert Drywall Anchors (W-C) into the drilled holes. Install Mount (A) to the wall using ST3.5x50mm
Screws (W-B) and a Phillips screwdriver.
T-A
A
A
W-B
W-C

5
T-A
A
W-AW-A AA
W-DW-D
STEP 1c - Conrete Installation
Hold Mount (A) up to the wall in your desired mounting location. Using Bubble Level (T-A) and a
pencil, mark mounting hole locations.
Drill 1.6” (40mm) deep holes using a 9/32” (7mm) drill bit.
Insert Concrete Anchors (W-D) into the drilled holes. Install Mount (A) to the wall using ST4.8x38mm
Screws (W-A) and a Phillips screwdriver.

6
STEP 2
STEP 3
Install M5x10mm Screws (M-A) onto the back of the Sonos Ray leaving a 5/32” (4mm) gap between the
speaker and screw head.
Slide the speaker onto Mount (A), ensuring that the rear-facing screw heads are anchored onto
Mount’s slots.
M-A

7
INSTALLATION COMPLETE

LAST UPDATED: 06/05/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303