Vivo STAND-TV55T User manual

Portable TV Tripod
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv55t
SKU: STAND-TV55T
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
A (x1)
Tripod Base
B(x1)
VESA Plate
C(x1)
VESA Bracket
I (x10)
Metal Washer
J x4)
Bolt
K(x1)
Wrench
H(x4)
Plastic Washer
D (x1)
VESA Bracket
E (x1)
Mounting
Bracket
F (x2)
M6x50
G (x6)
Nut
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
M-F (x4)
Metal Spacer
M-G (x8)
Small Spacer
M-E (x4)
M8x50
M-A (x4)
M5x14
M-B (x4)
M6x14
M-D (x4)
M8x30
M-H (x8)
Big Spacer
M-C (x4)
M6x30
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Unfold tripod base (A) and tighten lower knob.
TOOLS NEEDED DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
Phillips
Screwdriver
STEP 2
Adjust the pole to the desired height, insert retainer pin, and tighten upper knob.
77lbs
(34.93kg)

4
STEP 3
Install mounting bracket (E) using carriage bolts (F), washers (I), and nuts (G). The arrow on the
bracket must be pointing up.
STEP 4
Assemble TV plate to mounting bracket (B) using bolts (J), metal washers (I), plastic washers (H), and
nuts (G).

5
STEP 5
OPTION A: Flat Back Monitor
Mount VESA Bracket (C,D) to the back of the TV with appropriate screws and hardware.
OPTION B: Curved Back Monitor
If bolts are too long, spacers (M-G, M-H) may be required.

6
STEP 6
Hang the TV over TV mounting plate and secure with the pre-installed bolts
underneath.

7
Adjust as Desired

LAST UPDATED: 03/06/2020
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303