Vivo STAND - TV02D User manual

   
Instruction Manual
Email: [email protected]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
-  
Scan the QR code with your mobile device or follow the link
to helpful videos and specifications related to this product.
 
phillips screwdriver, wrench
 
 !"# $ !"#  !"#  !"#
% !"#  !"# & !'# ( !"#
) !"# * !"# + !"#
 !"#  !"# , !#  !#
1
-   !-#
'!"-
-  $ !-#
.!"-
- % !-#
/!'
-   !-#
-   !-#
.!0
-  !-#
/!0
-  & !/# -  ( !/# .!" !/#
- 
.!0 !/#
- $
.!". !-#
- 
-   !-#
.!/
-  % !/# -   !-# -  & !-# !"#
- (
- -12233 4522 3
6 !"#

57 
 " 6 5   5
Insert inner column (J) into the outer
column (K).
Attach plastic cover (I) to the
outer column using screws (P-
A) and tighten all screws with
Allen key (P-H).
Thread the knob (M) into
the column to secure.
Slide the support arms (B,C)
along column rails to desired
height.
Make sure both support arms are at the
same level and tighten all screws with
Allen key (P-H).
2
J
K
  6 1 $
Attach the column (K) and foot
pad (H) to the base (L) using
screws (P-B) and washers (P-F, P-
G) ensuring the plastic washers
are installed between the metal
washers and glass base. Tighten
all screws with Allen key (P-H).
 0 6 1 
Insert the casters (N, O)
into the base holes.
Adjust casters to sit level
when placed on the floor,
then secure by tightening all
top nuts.
Note: Lock the brakes on
casters to avoid sudden
movements during
installation.
K
L

 ' 6  $
Use the appropriate screws, washers and spacers (if needed) according to
the type of screen. Position adapter brackets (E,F) as close as possible to
center of TV. Screw the adapter brackets onto TV. Do not over tighten
screws.
*For Flat back screens
*For Recessed or curved screens
Fo 200  200mm mounting
Fo 200  200mm mounting
 - 6    & 18
Insert top plate (D) into the column
and secure with screws (P-C) using
Allen key (P-H).
Attach glass shelf (A) to the installed support
arms using screws (P-D) and washers (P-E), and
tighten all screws with a screwdriver.
Insert plastic bushing (I) into
opening in top plate (D).
3

If you do not understand these directions, or if you have any
doubts about the safety of the installation, please call a
qualified technician. Check carefully to make sure there are no
missing or defective parts. Improper installation may cause
damage or serious injury. Do not use this product for any
purpose that is not explicitly specified in this manual. We
cannot be liable for damage or injury caused by incorrect
assembly or inappropriate use.
Email: [e-mail]
Live chat: www.vivo-us.com
Call: 1-800-371- 6 4
For more VIVO products, check out our
website at
www.vivo-us.com.
If any parts are received damaged or defective, please contact
us. We are happy to replace parts to ensure you have a fully
functioning product.
8 9
  
Last updated: 4/19/2018 4
 . 6 1 
 : 7 5
Route the cables along the column. Attach the
cable covers (G) to the column to hold the
cables in place.
Attach the TV to the top plate with
the screws (P-A) and washers (P-E).
Tighten with Allen key (P-H).
Horizontal Vertical
Remove the screw from the back of
the top plate as shown. Rotate the
TV 90°, then secure with previously
removed screw.