Vivo MOUNT-VC55A User manual

TV Ceiling Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-vc55a
SKU: MOUNT-VC55A
[email protected]om www.vivo-us.com 309-278-5303

2
PACKAGE CONTENTS
99lbs
(44.91kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
A (x1)
Post
B(x1)
Ceiling Plate
C(x1)
Cover
P (x1)
5mm Allen
Wrench
O(x4)
Anchor
K (x4)
M6x30
L (x4)
M8x16
M (x4)
Spacer
N (x4)
M8x60
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
CAUTION!
DO NOT INSTALL INTO DRYWALL ALONE. VERIFY YOUR WALL CONSTRUCTION. USE WOOD STUDS TO
MOUNT. We include mounting for brick and concrete walls. If unsure, please contact us at vivo-us.
com, email at [email protected], or call us at 309-278-5303.
D(x4)
VESA Arm
E(x8)
M5 Nut
F (x8)
M5x12
G(x4)
Washer
H(x4)
M4x12
I(x4)
M4x30
J(x4)
M6x12
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
Remove the bolt and nut from the post (A) with a Phillips screwdriver, then separate the post into two
parts.
TOOLS NEEDED
Phillips
Screwdriver
Drill Pencil
STEP 2
Assemble the VESA arms (D) to the VESA plate on
the post (A) using M5x12 bolts (F), washers (G) and
M5 nuts (E).
NOTE: Skip this step if TV uses a VESA 75x75mm or
100x100mm mounting hole pattern.

4
STEP 3
Slip the top half of the post (A) down through the ceiling plate (B).

5
STEP 4
OPTION A: Wood Beam Ceiling
Locate beam using a stud finder, then using a 1/8” drill bit, drill two 2.3” deep holes exactly 4” apart.
Insert M8x60 screws (N), leaving 10mm of thread exposed, then hang the ceiling plate (B) with post (A)
on the screws and tighten.
OPTION B: Concrete Ceiling
Place the ceiling plate (B) against the ceiling and mark drilling locations with a pencil. Using a 3/8”
drill bit, drill 2.5” deep holes in the ceiling and insert anchors (O). Insert x2 M8x60 screws (N), leaving
10mm of thread exposed, then hang the ceiling plate (B) with post (A) on the screws. Insert x2
additional M8x60 screws and tighten.

6
STEP 5
Slide the cover (C) up on the post and snap onto the ceiling plate. Reassemble the post at the desired
height using previously removed bolt and nut.
OPTION A: Flat Back TV
Attach TV to the mount using bolts (H, J, L).
STEP 6

7
STEP 6 (Continued)
OPTION B: Curved Back TV
Attach TV to the mount using bolts (I, K) and spacers (M).
STEP 7
Adjust the TV to the desired position. Use the 5mm Allen wrench (P) to adjust the swivel joint behind
the VESA plate on the post if needed.

LAST UPDATED: 09/30/2019
Open Monday-Friday from 7:00am-7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times.
If any parts are received damaged or defective, please contact us.
We are happy to replace parts to ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected]
www.vivo-us.com
309-278-5303
AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
AVG. RESOLUTION TIME (within oice hrs): < 15 M