Vivo STAND-TV65F User manual

Dark Walnut Foldable Easel Studio TV Stand
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv65f
SKU: STAND-TV65F
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
WARNING!
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product for
any purpose that is not explicitly specified in this manual. Do not exceed weight capacity. We cannot
be liable for damage or injury caused by improper mounting, incorrect assembly or inappropriate
use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
TOOLS NEEDED
Phillips
Screwdriver
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
66 lbs
(30 kg)
A (x1)
Stand
S-A (x1)
Thumbscrew
M-A (x4)
M6x14mm Screw
M-F (x4)
Small Spacer
M-G (x4)
Large Spacer
T-A (x1)
4mm Allen Wrench
M-B (x4)
M8x16mm Screw
M-C (x4)
M6x30mm Screw
M-D (x4)
M8x35mm Screw
M-E (x4)
M8 Washer
B (x1)
Upper VESA Bracket
C (x1)
Lower VESA Bracket
D (x1)
Travel Bag

3
ASSEMBLY STEPS
STEP 1
Open Stand (A) by pressing down on the large disc.
Rotate the large disc on Stand (A) clockwise to lock.
CAUTION: Keeps hands clear
from locking mechanism when
unlocking
A
A

4
STEP 2
STEP 3
Use 4mm Allen Wrench (T-A) to loosen
set screw on Locking Collar (A1) from
Stand (A) and adjust placement between
50-80mm/2-3” from top of pole.
Note: Secure Locking Collar (A1) before
mounting TV; screw holes should face
back of Stand (A).
Open clamp of Lower VESA Bracket (C).
A
A1
C
T-A

5
STEP 4
STEP 5
Position Upper VESA Bracket (B) and Lower VESA Bracket (C) on back of TV, lining up with VESA pattern.
Secure using appropriate Screws (M-A through M-D), M8 Washer (M-E), Spacers (M-F, M-G), and a
Phillips screwdriver.
Slide the TV with VESA Brackets (B, C) onto Stand (A). Close the clamp on Lower VESA Bracket (C) over
Stand (A) pole and secure with Thumbscrew (S-A)
B
C
B
C
S-A
A

6
COLLASPING/STORING STAND
Remove TV from assembled stand. If the Locking Collar (A1)
on Stand (A) is spaced more than 80mm/3” from the top of
the pole, adjust between the range of
60-80mm/2.3-3” for easier collasping.
Note: Do not remove collar from stand.
To collapse stand (A), rotate the large disc counter clockwise to unlock. Fold the legs inwards
and push the upper pole down through the large disc.
A
A
A1
CAUTION: Keeps hands
clear from locking
mechanism when
unlocking
1
2

7
TRAVEL BAG
Place collasped stand into Travel Bag (D) for easy transportation.
D

LAST UPDATED: 02/01/2023
REV1
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303