Vivo STAND-TV00M4 User manual

Bolt-Down TV Mount
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/stand-tv00m4
SKU: STAND-TV00M4
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2
PACKAGE CONTENTS
TOOLS NEEDED
110lbs
(49.90g)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
WARNING!
Phillips
Screwdriver
M-G (x4)
Small Spacer
M-E (x4)
M8 Washer
M-A (x4)
M6x14mm
Screw
M-B (x4)
M8x16mm
Screw
M-C (x4)
M6x30mm
Screw
M-D (x4)
M8x35mm
Screw
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: NOT ALL HARDWARE INCLUDED WILL BE USED
A (x1)
Pole
B(x2)
VESA Bracket
C(x2)
Stopper
D(x1)
TV Plate
S-A (x4)
M6x16mm
Carriage Bolts
T-A (x1)
Allen Wrench
S-C (x4)
M6x25mm
Screw
S-D (x4)
M6x30mm
Screw
T-B (x1)
Wrench
S-B (x4)
M6 Nut
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF TV OR TV STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
M-H (x4)
Large Spacer
Drill
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.

3
ASSEMBLY STEPS
STEP 1
STEP 2
Position Pole (A) on the desktop and use a 3/16” drill bit to drill pilot holes. For desktops
1” thick, secure with M6x25mm Screws (S-C). For desktops greater than 1” thick, use
M6x30mm Screws (S-D). Slide Base Cover (A1) down.
Slide Base Cover (A1) up to reveal mounting holes on backside of Pole (A).
A1
A
S-C
S-D
A1
A

4
STEP 3
Position the VESA Bracket (B) on the back of the TV, making sure the hooks are towards the top of the
TV. Secure using Screws (M-A thru M-D), M8 Washers (M-E) and a Phillips screwdriver. Spacers (M-F,
M-G) are provided if needed.
STEP 4
Attach TV Plate (D) to mounting head on Pole (A) using M6x16mm Carriage Bolts (S-A), M6 Nuts (S-B)
and Wrench (T-B).
T-B
S-B
S-A
D
A
B

5
STEP 5
Loosen Set Screws (B1) on VESA Brackets (B) with a Phillips screwdriver and hang TV over TV
Plate (D). use a Phillips screwdriver to tighten security screws underneath to secure.
D
B1 B

6
STEP 6
Install Stoppers (C) on the TV Plate (D) to prevent the TV from sliding.
D
C

7
STEP 7
Adjust swivel tension using the Allen wrench (J). Manage cables using cable holes in pole.
T-A

LAST UPDATED: 02/10/2023
REV2
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303