Vivo MOUNT-POLE4 User manual

Pole Mount TV Bracket
Scan the QR code with your mobile device or follow the link
for helpful videos and specifications related to this product.
Instruction Manual
https://vivo-us.com/products/mount-pole4
SKU: MOUNT-POLE4
[email protected]om www.vivo-us.com 309-278-5303
Chat live with an agent!
GET IN TOUCH | Monday-Friday from 7:00am-7:00pm CST

2 3
ASSEMBLY STEPS
STEP 1
PACKAGE CONTENTS
WARNING!
Phillips
Screwdriver
A (x1)
VESA Plate
B(x2)
Le Bracket
C(x2)
Right Bracket
If you do not understand these directions, or if you have any doubts about the safety of the
installation, please call a qualified technician. Check carefully to make sure there are no missing or
defective parts. Improper installation may cause damage or serious injury. Do not use this product
for any purpose that is not explicitly specified in this manual. Do not exceed weight capacity.
We cannot be liable for damage or injury caused by improper mounting, incorrect assembly or
inappropriate use.
NOTE: SOME HARDWARE INCLUDED MAY NOT BE USED
D(x1)
Clamp
S-A (x2)
M8x55mm
Bolt
S-B (x2)
M8 Nut
S-C (x8)
M6x8mm
Screw
T-A (x1)
4mm Allen
Wrench
TIPOVER WARNING
SERIOUS OR FATAL CRUSHING INJURIES CAN OCCUR FROM TIPOVER. TO HELP PREVENT TIPOVER:
• NEVER ALLOW CHILDREN TO CLIMB, STAND, HANG, OR PLAY ON ANY PART OF MONITOR OR
STAND.
• USE TIPOVER RESTRAINT OR ANCHOR STAND TO WALL
USE OF TIPOVER RESTRAINTS MAY ONLY REDUCE, BUT NOT ELIMINATE RISK OF TIPOVER.
WARNING: CHOKING HAZARD
SMALL PARTS - NOT FOR CHILDREN UNDER 3 YEARS. ADULT SUPERVISION IS REQUIRED.
T-B (x1)
6mm Allen
Wrench
T-C (x1)
Wrench
Remove the Nuts (A3) that hold the Mounting Bracket (A2) to the VESA Plate (A1) using Wrench (T-C)
Keep these aside for re-attaching the brackets. Remove the Mounting Bracket from the VESA Plate.
55lbs
(25kg)
DO NOT EXCEED WEIGHT CAPACITY.
Failure to do so may result in serious injury.
TOOLS NEEDED
M-G (x4)
Small Spacer
M-E (x4)
M8 Washer
M-A (x4)
M6x14mm
Screw
M-B (x4)
M8x16mm
Screw
M-C (x4)
M6x30mm
Screw
M-D (x4)
M8x35mm
Screw
M-F (x4)
Small Spacer
A1
T-C
A2
A3
STEP 2
Place Mounting Bracket (A2) around a compatible pole to the Clamp (D) using 6mm Allen Wrench
(T-B), M8x55mm Bolts (S-A), and M8 Nuts (S-B) as shown below.
Min. 28mm to Max 50mm
A2
S-B
A2
T-B
S-A

4 5
STEP 3 STEP 4
Use appropriate Screws (M-A thru M-D), M8 Washers (M-E), and Spacers (M-F, M-G) and secure VESA
bracket assembly to your screen using a Phillips screwdriver. .
Follow steps below corresponding to your VESA pattern. Attach the Le & Right Brackets (B, C) to
VESA Plate (A) using a M6x8mm Screws (S-C) and a Phillips screwdriver.
VESA 300x300, 400x400
VESA 400x200
VESA 400x300
STEP 5
Attach TV and VESA assembly to Mounting Bracket (A2) using Nuts (A3) removed in STEP
1 and Wrench (T-C).
B
B
B
C
C
C
S-C
S-C
S-C
T-C
A3

6 7
STEP 6
Use 4mm Allen Wrench (T-A) to loosen and tighten the tilt joint adjustment bolts as shown below.
THIS PAGE INTENTIONALLY LEFT BLANK
Adjust as Desired
T-A

LAST UPDATED: 03/01/2023
REV1
Love your new VIVO setup and want to share?
Tag us in your photo! @vivo_us
Open Monday - Friday 7:00am - 7:00pm CST,
our dedicated support team can oer immediate assistance with rapid response times. If any
parts are received damaged or defective, please contact us. We are happy to replace parts to
ensure you have a fully functioning product.
FOR MORE VIVO PRODUCTS, CHECK OUT OUR WEBSITE AT: www.vivo-us.com
[email protected] AVG. RESPONSE TIME (within oice hrs): 1HR 8M
- 23% within < 15m
- 38% within < 30m
- 61% within < 1hr
- 83% within < 2hr
- 92% within < 3hr
AVG. RESOLUTION TIME (within oice hrs): < 15 M
www.vivo-us.com
Chat live with an agent!
AVG. RESOLUTION TIME (within oice hrs): 5M 4S
309-278-5303