Vingtor Stentofon Turbine TMIS-1 Installation instructions manual

Mounting Guide
TMIS-1 Turbine Mini IP Intercom
1 Turbine Mini Intercom
This document describes the dimensions, mounting procedure, and connections of the Vingtor-Stentofon TMIS-1
Turbine Mini intercom.
Item Number Type Item Name
1008116010 TMIS-1 Turbine Mini IP Standard-1
1008140020 TA-2 Turbine Flush Mount 2-Gang Double-Depth Back Box
1008140030 TA-3 Turbine Flush Mount 2-Gang Back Box
2 Flush Mount 2-Gang Back Boxes - TA-2 & TA-3
TA-2 TA-3
LIt is recommended to utilize back boxes with weep holes at the bottom.
96 mm / 3.78?
48 mm
25 mm
23 mm
89 mm / 3.50?
89 mm / 3.50?
96 mm / 3.78?
46 mm
SIDE
SIDE
22 mm
1.81? 0.98?
0.90?
0.87?
1.89?
+5
1
2
3
4
5
6
Prod.date:
Serial no:
Designed and developed by
Zenitel in Norway
Assembled in Poland
-
+
+24
COM
NO
NC
QR
1008116010 . 0100
TMIS-1
[yyyyww]
[yywwxxxx]
www.zenitel.com
39 mm
117 mm
117 mm
33.5 mm
48 mm
25 mm
23 mm
46 mm
SIDE
SIDE
22 mm
96 mm / 3.78?
96 mm / 3.78?
0.87?
1.81? 0.98?
64 mm / 2.52?
64 mm / 2.52?
1.89?
0.90?

3 Flush Mounting Procedure
1. Mount the 2-gang back box into the wall
2. Fasten the TMIS-1 intercom to the back box with four #6-32 UNC countersunk-head screws
4 Connections
The TMIS-1 Turbine Mini IP intercom has a RJ-45 PoE/LAN port, and 6-pin & 10-pin external connectors.
Ethernet /
Power
10/100 Mbps Ethernet RJ-45 port for LAN (uplink) connection.
Supports PoE (802.3af). Draws power from either spare line or
signal line.
Secondary
Power
24 VDC (16 – 48 V) secondary power is provided from an
external adapter.
Relays There is one Double Throw relay contact with 60W
switching power. COM, NO, NC contacts are provided. Max:
250VAC/220VDC, 2A, 60W.
Input/Output 6 I/Os are available. Each I/O can be configured as either input,
output, or LED driver.
Audio Line Out A balanced 600 ohm audio line out
LUse cables crimped with ferrules for terminal block connectors
• When the TMIS-1 intercom is connected to the network, its IP address is automatically obtained from a
DHCP server or an IP address in the range 169.254.x.x will be assigned.
• To make the intercom speak its IP address, press the call button on the station.
1
5
4
3
2
1
6
10
5
4
3
2
9
8
7
RJ-45
PoE
port
24 VDC for external secondary power
if PoE is not used. Pin 1 is positive.
- 5.3V (LED driver)
- GND
- Input/Output 5
- COM relay
- NC relay
- NO relay
- Input/Output 1
- Input/Output 2
- Input/Output 3
- Input/Output 6
- 600 ohm balanced line out +
- 600 ohm balanced line out -
- Input/Output 4
Ethernet Connection
Flush Mount 2-Gang Back Box
TMIS-1 Turbine Mini
#6-32 UNC Screws
#6-32 UNC Screws
Date: 17.6.2015
A100K11589 customer[email protected]
DOC NO.
Zenitel and its subsidiaries assume no responsibility for any errors that may appear in this publication, or for damages arising from the information therein. STENTOFON and VINGTOR products are developed and marketed by Zenitel. The company’s Quality Assurance System is certified to meet the
requirements in NS-EN ISO 9001. Zenitel reserves the right to modify designs and alter specifications without notice. ZENITEL PROPRIETARY. This document and its supplementing elements, contain Zenitel or third party information which is proprietary and confidential. Any disclosure,
copying, distribution or use is prohibited, if not otherwise explicitly agreed in writing with Zenitel. Any authorized reproduction, in part or in whole, must include this legend. Zenitel – All rights reserved.