VOGELS NEXT 7355 Installation guide

November 2017
Mount
Q. What is the minimum screen size of the TV in combination the wall
mount?
A. The minimum screen size is 40 inch (102 cm).
Q. What is the maximum screen size and weight of the TV in combination
with the tv wall mount?
A. The maximum screen size is 65 inch (165 cm) and maximum weight is 30
kg. The Screen Protection System (SPS®) with anti-bump is active up to a
screen size of 65 inch.
Q. Does this product have a tilt function?
A. There is no tilt in this product.
Q. Can the DesignMount NEXT 7345 be upgraded to MotionMount?
A. No, that’s not possible.
Q. What is the guarantee of this wall mount?
A. Vogel’s gives you a lifelong guarantee for defects in materials and
manufacturing of the wall mount. The guarantee is 2 years for the motor
units and electronics.
Q. What is the standby power consumption of this wall mount?
A. The standby power consumption is less than 0.5 Watt.
Q. Is it possible to turn the TV manually (‘manual override’)?
A. Yes, it is possible to turn the TV manually.
Q. What is the maximum turn angle?
A. The maximum turn angle is 120˚ (2x 60˚).
Q. What is the maximum distance the TV can move from the wall?
A. The maximum distance from the wall is 72 cm.

November 2017
Q. Is there any risk for trapping, squeezing or injury to people while mount is
moving automatically?
A. The integrated slip-hinge and electronic protection circuit (which switches
off the motors in case of too much friction), pinching will be prevented.
Control
Q. Do I need to adjust settings to my TV after installation?
A. No special settings are required.
Q. Is the this mount provided with a remote control?
A. No, there is no dedicated remote control needed. The TV automatically
turns to the viewer (last position) when TV is switched on and
automatically returns to the wall position when TV is switched to standby.
For additional functionality, MotionMount app can be downloaded from
App Store / Google Play free of charge (search for ‘motionmount’).
Q. Which devices support the MotionMount app?
A. Apple devices with iOS 8 and higher, with Bluetooth (iPhone: 4S and
newer, iPad: 2 and newer, iPad Air: 1 and newer, iPad Mini: 1 and newer,
iPod Touch) and devices with Android 4.3 (Jelly Bean / v18) and higher,
with Bluetooth (smart phones and tablets from HTC, Huawei, LG,
Samsung, Sony).
Q. How many preset positions can be stored with the app?
A. Up to ten preset positions can be stored.
Q. Does the app control make use of Bluetooth connection with the
MotionMount?
A. Indeed, the app control makes use of Bluetooth 4.0 connection. The
Bluetooth of your smartphone / tablet needs to be switched on while using
the app.
Q. What does ‘Freeze position’ function do?
A. The Freeze position function can be found in the app (Settings –
Automatic Motion Management). In case Freeze position is disabled, your
TV will return to last used position when TV is switched on. In case Freeze
position is enabled, your TV will always return to the same position when
TV is switched on.

November 2017
Installation
Q. How many wall sockets for powering the TV and this product do I need?
A. You only need one wall socket. Integrated ‘power distribution’ is part of the
MotionMount proposition.
Q. Can I use the Vogel’s cable cover NEXT 7840 together with this product?
A. Yes, the NEXT 7840 cable cover can also be used. Please mount the wall
mount at a height of 116 cm from the floor.
Q. Are all cables and mounting materials included?
A. Yes, all cables and mounting materials are included.
Q. Is the drilling template of the MotionMount the same as of the
DesignMount (NEXT 7345)?
A. Yes, the drilling template is the same for all NEXT Series products.
Q. What mains voltage range and frequency are suitable for this wall mount?
A. The mains (AC) voltage range is 220 –240 Volt, 50 / 60 Hz.
Q. Do I need to connect my TV power socket to the power cable from this
wall mount?
A. Yes, you need to connect the power socket of the TV with the power cable
from the mount. This makes that TV is automatically moving to last
position when switching on the TV and is automatically moving back to the
wall when TV is switched off.
Q. Can I level this mount both in horizontal and vertical direction?
A. Yes, it can be levelled in both directions.