Volt VSPL-9001-25-BBZ User manual

VOLT®LOW VOLTAGE LANDSCAPE LIGHTING
V O LT ®Solar Area Light Kit
ITEM: VSPL-9001-25-BBZ
INSTALLATION INSTRUCTIONS
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

V O LT ®Solar Area Light Kit - VSPL-9001- 25-BBZ
INSTALLATION INSTRUCTIONS
IMPORTANT: PLEASE READ BEFORE INSTALLATION
!
IMPORTANT SAFETY INSTRUCTIONS
!
PACKAGE CONTENTS
A. (1) Area Light
813.978.3700 • [email protected] • www.voltlighting.com
2
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes
and instructions may result in serious injury, property damage and void
the warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PER-
SONS
Lighted lamp is HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Lamp gets HOT quickly!
2. Do not touch the hot lens, guard or enclosure.
3. Keep lamp away from materials that may burn.
4. Do not touch lamp at any time. Use a soft cloth. Oil from skin may
damage lamp.
5. Do not operate the luminaire tting with a missing or damaged
shield.
SAVE THESE INSTRUCTIONS
Parts Required (sold separately)
A. (1) Solar Panel with Bracket

PRODUCT DIMENSIONS
813.978.3700 • [email protected] • www.voltlighting.com
3
23.25”
7.5”
1
Install Stake
Determine the desired location
for mounting the stake. Ham-
mer the stake into the ground
until ange of stake is ush to
grade. To avoid damage to the
stake, place a board on top of
the stake while hammering.
Note: If the ground is hard and
the stake is difcult to install,
make a crosscut in the ground
using a at shovel.
Board
Stake
Ground
Soil

V O LT ®Solar Area Light Kit - VSPL-9001- 25-BBZ
INSTALLATION INSTRUCTIONS
813.978.3700 • [email protected] • www.voltlighting.com
4
2
Install Fixture to Stake
Pass the xture wire
through the center hole of
the stake. Thread the x-
ture onto the stake. Hand
tighten until snug.
Fixture
Fixture Wire
Ground
Stake
Soil
3
Wire Connection: Option A
Solar Panel
Connection Hub
Area Light
Area Light Supply
Wire
Solar Panel Supply
Wire
Option A: Connect with Connection Hub

1
813.978.3700 • [email protected] • www.voltlighting.com
5
Wire Connection: Option B
You can choose from Option A or Option B to complete the
installation. Option A is the recommended method to install
the solar lights.
Optional A: Strip the supply wire leads from the solar panel
and the supply wire leads from the area lights. Insert both the
lead wires into the connection hub. There is a maximum of 7
xtures that can be connected to the hub.
Optional B: Strip the supply wire leads from the solar panel
and the supply wire leads from the area light. Using two wire
connectors (sold separately), connect the leads from the
solar panel to the area light.
Wire Connector
Solar Panel
Solar Panel Supply Wire
Area Light Supply Wire
Area Light
Connect with Wire Connectors

Specications and product details subject to change without notice.
© Copyright 2023, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • www.voltlighting.com
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)