Volt VWL-705 User manual

VOLT®LOW VOLTAGE LANDSCAPE LIGHTING
V O LT ®Salty Dog MR16 Well Light
ITEM: VWL-705
INSTALLATION INSTRUCTIONS
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)

V O LT ®Salty Dog MR16 Well Light - VWL-705
INSTALLATION INSTRUCTIONS
IMPORTANT: PLEASE READ BEFORE INSTALLATION
!
IMPORTANT SAFETY INSTRUCTIONS
!
This luminaire is intended for installation in accordance with local codes
and the National Electric Code (NEC). Failure to adhere to these codes and
instructions may result in serious injury, property damage and void the warranty.
These instructions do not intend to cover all variations in installation,
operation maintenance or mounting situations.
1. Make sure that the power is turned OFF before installing or servicing this
luminaire.
2. WARNING: risk of electrical shock. Install all luminaires 10 feet (3.05M) or
more from pool, spa or fountain.
3. This luminaire is intended to be used only with a power supply
(transformer) rated maximum of 300 watts (25 AMPS) at 15 volts.
4. Wiring connections must be made with UL listed wire connectors that are
suitable for outdoor use.
5. Position the low voltage wire and wire connector so that it is
located within 6 inches (15.2 cm) from a building structure, a luminaire or
tting.
6. The main low voltage cable is intended for shallow burial - less than 6
inches (152 mm).
INSTRUCTIONS PERTAINING TO A RISK OF FIRE, OR INJURY TO PERSONS
LIGHTED LAMP IS HOT!
WARNING – To reduce the risk of FIRE OR INJURY TO PERSONS.
1. Turn off/unplug and allow to cool before reducing lamp.
2. Lamp gets HOT quickly!
3. Do not touch the hot lens, guard or cowl.
4. Keep lamp away from materials that may burn.
5. Do not touch lamp at any time.
6. Use a soft cloth.
7. Oil from skin may damage lamp.
8. Do not operate the xture with a damaged or missing lens or shield.
813.978.3700 • [email protected] • www.voltlighting.com
2

PACKAGE CONTENTS
Parts Required (sold separately)
813.978.3700 • [email protected] • www.voltlighting.com
3
PRODUCT DIMENSIONS
A. (1) Fixture B. (1) PVC Tube
A. (1) MR16 Lamp
8.25”
6.25”
5.5”

Remove Faceplate and Lens
1
Install Lamp
2
V O LT ®Salty Dog MR16 Well Light - VWL-705
INSTALLATION INSTRUCTIONS
813.978.3700 • [email protected] • www.voltlighting.com
4
Loosen the thumb screws
and slide the housing down to
the end of the bars. Unscrew
the screws and remove the
faceplate, gasket, and lens
from the housing.
Gasket Faceplate
Screw
Lens
Thumb Screw
Housing
Insert the lamp with the correct
wattage and type marked on the
xture label.
CAUTION: Do not exceed
maximum wattage marked on
luminaire label.
NOTE: DO NOT touch lamp with
bare hands. Use soft cloth to
handle lamp.
MR16 Lamp
Socket

Install Lamp
3
813.978.3700 • [email protected] • www.voltlighting.com
5
Place the lens, gasket and
faceplate back onto the
housing. Secure them with the
screws previously removed.
Hand tighten until snug, then
use a screwdriver to secure the
screws using a star pattern.
Adjust housing to your desired
height and angle, then secure it
in place with the thumb screws.
Gasket
Screw
Faceplate
Lens
Thumb Screw
Housing
Dig Hole
4
3”3”
3”
Dig a hole in the ground making
sure there is approximately
3 inches of room on all sides
surrounding the PVC tube for
pea gravel or sand.
PVC Tube
Hole
Soil
Wire Connection
5
Place the xture onto the PVC
Tube. Pass the luminaire pigtail
through the PVC tube.
Strip both leads from the
luminaire pigtail. Using two wire
connectors (sold seperately),
connect the leads from the
luminaire to main supply cable
leads.
PVC Tube
Soil
Fixture
Pigtail
Wire Connector
Main Supply Wire

Fill Pea Gravel or Sand
6
V O LT ®Salty Dog MR16 Well Light - VWL-705
INSTALLATION INSTRUCTIONS
813.978.3700 • [email protected] • www.voltlighting.com
4
Install the PVC tube with
xture in the hole and ll the
extra space with pea gravel
or sand for proper water
drainage.
Pea Gravel or Sand PVC Tube with Fixture
Soil

813.978.3700 • [email protected] • www.voltlighting.com

Specications and product details subject to change without notice.
© Copyright 2023, VOLT® Lighting, Lutz FL USA 33549 • All rights reserved.
[email protected] • www.voltlighting.com
1-813-978-3700 • Mon-Fri 8am-8pm • Sat-Sun 10am - 6pm (EST)