Voxelab Proxima User manual

This guide is only applicable to Voxelab Proxima 3D printer
Proxima
Quick Start Guide
VL02-EN/CN-A01
Please put on gloves while using photopolymer resin to avoid
direct contact with hands.
To ensure the printing quality, please don’t open the light shield
unless it’s necessary.
Unused photopolymer resin needs to be stored in a dark, dry ,
and cool place.
Please clean the finished model with anhydrous alcohol.
Please ensure that the platform is installed correctly and no
items before operating to avoid damaging the LCD screen.
1.
2.
3.
4.
5.
WARNING

Each 3D printer has passed the printing test before leaving the factory.
It is normal if there is residual material in the extruder or slight scratch
on the printing platform and does not affect the use.
Users will find the Quick Start Guide together with the printer accessories. The Quick Start
Guide will help you start your print journey as soon as possible.
Note:
Quick Start Guide
Foreword
Dear User:
Thank you for choosing and using the products of Voxelab Technology. Thank you
for your support and help to Voxelab Technology.The products of Voxelab
Technology have excellent quality and performance. For your convenience, please
read this Guide carefully before use and follow the instructions strictly. The
Voxelab team is always ready to provide you with the perfect service. In case of any
problems during the use, please contact us by phone or email listed in this Guide.
In order to better experience our products, you can also get operation knowledge
of the equipment from the following way:
1

PLEASE STRICTLY FOLLOW ALL THE SAFETY WARNINGS AND NOTICE BELOW ALL THE TIME.
Work Environment Safety
Notice
Keep your work place tidy.
Do not operate Proxima in the presence of flammable liquids, gases or dust.
Proxima should be placed out of children and untrained people's reach.
Place Requirements
The device must be placed in a dry and ventilated environment. The distances of the
left, right and back side space should be at least 20cm, and the distance of the front
side space should be at least 35cm.
Cautions
Do not leave the device unattended for long.
Do not make any modifications to the device.
Do not operate the device in bright light.
Operate the device in a well-ventilated environment.
Never use the device for illegal activities.
Never use the device to make any food storage vessels.
Never use the device to make any electrical appliance.
Never put the model into your mouth.
Do not remove the models with force.
Personal Safety
please don’t direct touch the photopolymer resin with hands.
Please put on gloves and masks during operation.
Please don’t look at the light source directly.
Do not operate the device while you are tired or under the influence of drugs,
alcohol or medication.
Electricity Safety
Always use the Proxima with a properly grounded outlet. Do not refit Proxima plug.
Do not use Proxima in damp or wet locations. Do not expose Proxima to burning sun.
Do not abuse the cable.
Avoid using the device during an thunderstorm.
In case of uncertain accident, please unplug the device if you do not use it for long.
2

Environment Requirements
Temperature: RT 15-30℃
Moisture: 20%-70%
Photopolymer Resin Requirements
Do not abuse the photopolymer resin. Please make sure you use the Voxelab
photopolymer resin or the photopolymer resin from the brands accepted by
Voxelab.
Photopolymer Resin Storage
Unused photopolymer resin needs to be stored in a dark, dry, cool place, and out
of the reach of children. The resin stored at low temperature should be shaken
well and used at room temperature (above 20℃).
Notes on model layout
Try to avoid inverted loopholes of model layout. Reduce exposure time when
printing models with dense layout.
Legal Notice
All the information in this document is subject to any amendment or change
without the official authorization from Voxelab.
First edition（April 2020）
@Copyright 2020 Zhejiang Flashforge 3D Technology Co., Ltd. All rights reserved
3

Getting to Know Your Proxima
5. Box Tighten Knob
7. USB Stick Port
9. Power Switch
4. Resin Box
1. Platform Tighten Knob 2. Z-axis
8. Light Shield
6. Touched Screen
10. Power Slot
3. Build Plate
4
8
910
2
4
5
6
7
1
3

Parameter
Print Technology
Light Resource
XY Resolution
Suggested Layer Thickness
AC Input
Liquid Crystal Display
405nm UV integrated light array
0.050mm(2560*1620)
0.025-0.1mm
7KG
Net Weight
110-220V, 50-60Hz 12V, 5A, 60W
Software CHITUBOX/VoxelPrint
Screen
Connectivity
Production Dimensions
Build Volume
3.5’’ color IPS Touch Screen
USB Stick
230*200*410mm
125*68*155mm
5

Accessory Box
After-sales card
Power cable
USB stick
Proxima Quick start guide
Power adapter Build plate Rubber gloves
Filter paper
[email protected]
Wrench set Screw set Metal Scraper
Thisguide is only applicable to VoxelabProxima 3D printer
Proxima
Quick Start Guide
VL02-EN/CN-A01
Pleaseput on gloves while using photopolymer resinto avoid
directcontact with hands.
Toensurethe printing quality, please don’t open the light shield
unlessit’s necessary.
Unusedphotopolymer resin needs to be storedin a dark, dry ,
andcool place.
Pleaseclean the finished model with anhydrous alcohol.
Pleaseensure that the platform is installed correctlyand no
itemsbefore operatingto avoid damaging the LCD screen.
1.
2.
3.
4.
5.
WARNING
Plastic Scraper
6

Leveling
7
1. Install the build plate on the plate
holder.
2. Tighten the platform tighten knob.
If the build plate cannot fix well,
please to do step 3 first, then do the
step 2.
3. Just loose two screws in the front
and right side of cradle head on the
build plate.
4. Make sure it can move free but not to
fall.
Open the paper box and take out the Proxima on the desk.
Remove all protective foam and plug in the power cable.

7. Click [Tool] - [Manual] and open a
new window. Click [Home] and
wait for stop movement of Z-axis.
6. Remove resin box.Put a piece of A4 paper
on the 6’ LCD screen.
5. Connect the power adapter and power cable. Plug the output end of the power
adapter into the power input port on the back of the printer and turn on the switch.
Print Tool Systerm
Manual
Stop
Exposure Set Z=0
Back
0.1mm 1mm 10mm
8