Walker Edison AF18NAOST User manual

P.1
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 25/12/2019 (I)
®
Walker Edison
TM
Assembly Instructions
Item # : AF18NAOST

P.2
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
21
III. Two people are recommended for ease in the assembly of this product.
IV. The three main types of hardware used to assemble this product are: wood
dowels, screws and bolts.
V. The provided glue is to secure wood dowels in place. When first inserting dowels,
locate the appropriate hole for the dowel, place a small amount of glue in the hole
and insert the dowel. Wipe away excess glue immediately.
In future assembly steps when dowels are necessary to attach assembly parts
together, place a small amount of glue on the end of the dowel before attaching
parts together. Wipe away excess glue immediately.
VI. A Phillips head screwdriver is required for the assembly of this product .
VII. Power tools should not be used to assemble this product.

P.3
Parts List
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
1
2
33
5
5
5
5
44

P.4
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Hardware List
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
M6x10mm Bolt
A
16 pcs
Ø4x12mm ScrewB 8 pcs
Ø4x38mm ScrewC 4 pcs
Ø8x30mm Wooden dowel
D
8 pcs
M6x27mm BoltE 4 pcs
M4 Hex KeyF 1 pc
bracketG 4 pcs
H Glue tube 1 pc
J Adjustable floor leveler 4 pcs

P.5
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 1
3
A
A
X2
A
A
Insert wooden dowel (A) into part(3) as per diagram.

P.6
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 2
1
3
3
1
B
B
B
B
G
G
B
BG
Put part (3) to part (1), then using screw (B) attach bracket (G) to parts (1,3) with Philips head
screwdriver as per diagram.

Step 3
P.7
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
1
3
1
B
BG
B
B
B
B
G
G
3
Put part (3) to part (1), then using screw (B) attach bracket (G) to parts (1,3) with Philips head
screwdriver as per diagram.

Step 4
P.8
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
3
3
2
C
C
C
C
Using screw (C) attach part (2) to part (3) with Philips head screwdriver as per diagram.

P.9
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 5
5
5
5
5
4
Attach part (5) to part (4) as per diagram.

P.10
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 6
4
5
5
D
D
F
5
5
D
D
Using bolt (D) attach part (5) to part (4) with Hex key (F) as per diagram.
Note : Do not fully tighten all the bolts .

P.11
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 7
5
5
5
5
4
D
D
D
D
D
F
Using bolt (D) attach part (5) to part (4) with Hex key (F) as per diagram.

P.12
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 8
E
E
F
4
4
E
E
2
Using bolt (E) attach part (4) to part (2) with Hex key (F) as per diagram.
Note : Fully tighten all the bolts .

P.13
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.
Step 9
J
J
J
J
J
4
4
Secure adjustable floor leveler (J) into part (4) ,if necessary adjust the floor leveler at the
bottom of the support leg to level the unit .

Step 10
Final Assembly
P.14
Copyright © 2019 by Walker Edison Furniture Co., LLC. All rights reserved.