Walker Edison AF30NOR1D User manual

Item # : AF30NOR 1 D
Assembly Instructions
  
 
Revised 07/11/2018
Copyright © 2018, by Walker Edison Furniture Co., LLC. All rights reseed. P.1

Insert dowels (A) into side panels (3)（4）（5）.
Screw cam bolts (B) into panels (1)

Use hex key (P), screw (D) to secure the bottom panel (2) to the side panels (3,4,5).
Slide back panel (8) into side panel(3,4,5)

Place the top panel (1) to the side panels (3,4，5). Insert cam locks (C) into side panels (3,4,5)
and tighten with a screwdriver.
Use wrench (P), bolts (F) to secure legs (10) into bottom panel (2).

Place sticker (L) over holes as per diagram
Attach hinge locks (M) to Door (9) using screws (N) as shown in the diagram.
Attach handle (H) to Door (9) using bolts (J)

Insert support Pin(E) into Side panel (3,4),insert L shape Bracket (G) into side panel (4,5)
Attach door(9) to assembled unit using screws (N).Tighten screws (N) with
a screwdriver.

Insert shelf (6) into side panels (3,4). Place glass(7) on top of L shape Bracket carefully.
Attach velcro strap (Q) to part (1) using screw (T) with screwdriver. Attach plastic wedge (U) into
part (8) for 8 times.

Place unit in desired location and mark the wall for anchor location. Insert plug(S) into wall per per
diagram.
Secure product to wall with screw (R) and velcro strap (Q) to plug (S).