W&H Implantmed SI-1010 User manual

Quick guide for Implantmed SI-1010 / SI-1015 / SI-1023
Hygiene and maintenance – Motor with cable
Start-up – General
Connect the mains cable
and foot control.
Connect motor cable. Insert the irrigant support. Attach the universal
support and lock it.
Open the pump cover.
Insert the irrigation tubing.
Close the pump cover. Plug the mains cable into
a earthed power socket.
Switch on the control unit
at the power switch.
Control unit operation – Main menu
16
max. 50 Ncm
1:1
rpm
40 000
Implantology 1
   



My favorites Set program
Documentation (DOCU) Set speed / torque
Setup Progress display mode
Forward/reverse operation mode Programs 1 to 5
Set coolant volume
Pre-disinfection
>If heavily soiled, clean first with disinfectant cloths.
Motor with cable
Do not twist or kink the motor cable! Do not coil it
too tightly!
Manual cleaning
>Rinse and brush off with demineralized water (< 38°C)
Mechanical cleaning and disinfection
>Use only thermo washer disinfectors with a drying
program for preparation.
Sterilization
W&H recommends sterilization according to EN
13060, class B. Other sterilization methods may
reduce the life span of the motor.
storage
>Store sterile goods dust-free and dry.
S-N2
S-NW

50914 AEN Rev. 000 / 15.07.2016
Subject to alterations.
W&H Dentalwerk Bürmoos GmbH t + 43 6274 6236-0
Ignaz-Glaser-Straße 53, Postfach 1 f + 43 6274 6236-55
5111 Bürmoos, Austria [email protected] wh.com
Error message, work can be continued
Error message, work cannot be
continued
Add user
Back
Edit
Confirm/save
Add drill protocol
Reduce/increase
Icons – Navigation
Icons – Information
Setting selected
Information
Favorite selected
rot = replace batteries
Foot control S-NW
Information with selection option
Foot control S-N2
Icons – Setup
Screen lock
User
Sound
Foot control
Torque curve
ON/OFF
System
Manage user
Set screen lock
LED
Reset
Dental numbering system
Licences
Module info
Device info
Software update
Language
FDI
UNS
Switch to next screen
Help
Icons – Information
Icons – Main menu
New docu
Complete docu
New position
Bar
Per cent
Documentation (DOCU)
Drill protocol
Total
Drill protocol group
Edit
Rename
Copy
Transmission
Torque
Speed
Favorite
Activate
Delete
Icons – Main menu Icons – Setup
Quick guide for Implantmed SI-1010 / SI-1015 / SI-1023
Pairing
Variable
System check
Interval
Fade-out time
Service
Restart
Foot control
Osstell
User interface
Motor control unit