Wasp Wasp WDI7500 Installation and operation manual

Wasp WDI7500/Wasp WWS750
2D Duraline USB or Wireless Barcode Scanner
Product Reference Guide

Wasp Barcode Technologies
1400 10th Street
Plano, Texas USA 75074
Telephone: [phone]
©2013-2018 Wasp Barcode Technologies
An Unpublished Work - All rights reserved. No part of the contents of this documentation or
the procedures described therein may be reproduced or transmitted in any form or by any
means without prior written permission of Wasp Barcode Technologies or its subsidiaries or
affiliates ("Wasp Technologies"). Owners of WaspTechnologies products are hereby granted
a non-exclusive, revocable license to reproduce and transmit this documentation for the
purchaser's own internal business purposes. Purchaser shall not remove or alter any pro-
prietary notices, including copyright notices, contained in this documentation and shall
ensure that all notices appear on any reproductions of the documentation.
Should future revisions of this manual be published, you can acquire printed versions by
contacting your Wasp Technologies representative. Electronic versions may either be
downloadable from the Wasp Technologies website (www.waspbarcode.com) or provided
on appropriate media. If you visit our website and would like to make comments or sugges-
tions about this or other Wasp Technologies publications, please let us know via the "Con-
tact WaspTechnologies" page.
Disclaimer
Wasp Technologies has taken reasonable measures to provide informantion in this manual
that is complete and accurate, however, Wasp Technologies reserves the right to change
any specification at any time without prior notice. Wasp Technologies and the Wasp Tech-
nologies logo are registered trademarks of Wasp Technologies Barcode Technologies in
many countries, including the U.S.A. and the E.U. Duraline is a trademark of Wasp Barcode
Technologies registered in many countries, including the U.S.A. and the E.U. All other brand
and product names may be trademarks of their respective owners.
Patents
This product is covered by one or more of the following patents:
Design patents: AU344427, AU344428, AU344429, EP001970237, TWD159476, TWD159477,
TWD160254, TWD160255, USD682277, USD702238, ZL201230284676.X
Utility patents: EP0996284B1, EP0999514B1, EP1114390B1, EP1128315B1, EP1172756B1,
EP1396811B1, EP1413971B1, EP1816585B1, EP1828957B1, EP2275966B1, EP2517148B1,
EP2521068, EP2649555B1, JP4435343B2, US6478224, US6512218, US6513714, US6561427,
US6808114, US6877664, US6997385, US7053954, US7234641, US7387246, US7721966,
US8113428, US8245926, US8561906, US8743263, US8888003, US8915443, US9430689,
US9482793, ZL200880132595.9, ZL200980163411.X

Product Reference Guide i
Table of Contents
INTRODUCTION........................................................................................................................................................................................... 1
About this Manual ................................................................................................................................................................................................... 1
Overview ........................................................................................................................................................................................................... 1
Manual Conventions ....................................................................................................................................................................................... 2
References ................................................................................................................................................................................................................ 2
Services and Support ...................................................................................................................................................................................... 2
About the Reader ..................................................................................................................................................................................................... 3
The WWS750-BS Base Station/Charger ............................................................................................................................................................... 4
Battery Safety ........................................................................................................................................................................................................... 5
Programming the Reader ........................................................................................................................................................................................ 6
Programming Barcodes .................................................................................................................................................................................. 6
SETUP.......................................................................................................................................................................................................... 7
Unpacking ................................................................................................................................................................................................................. 7
Setting Up the Reader ............................................................................................................................................................................................. 7
Connecting the Cable (Corded versions) ....................................................................................................................................................... 8
Configuring the Horizontal Base Station .............................................................................................................................................................. 9
Mounting the WWS750-BS Cradle ......................................................................................................................................................................... 9
Mounting Brackets .......................................................................................................................................................................................... 9
Permanent Mounting ................................................................................................................................................................................... 10
Mounting for Portable Use ........................................................................................................................................................................... 11
System Connections ..................................................................................................................................................................................... 12
Connecting and Disconnecting the Interface Cable ................................................................................................................................... 13
Configuring the Vertical Base Station ......................................................................................................................................................... 14
WWS750-BS Configuration .......................................................................................................................................................................... 18
Interface Selection ................................................................................................................................................................................................. 18
Setting the Interface ..................................................................................................................................................................................... 18
Customizing Configuration Settings .................................................................................................................................................................... 21
Configure Interface Settings ........................................................................................................................................................................21
Global Interface Features ............................................................................................................................................................................. 21
Configuring Other Features .........................................................................................................................................................................21
Software Version Transmission .................................................................................................................................................................. 21
Self Test and Statistics ................................................................................................................................................................................. 21
Resetting the Product Configuration to Defaults ...................................................................................................................................... 22
Set Date and Time ........................................................................................................................................................................................ 22
Linking the Reader ................................................................................................................................................................................................. 23
Link RF Devices to Base ...............................................................................................................................................................................23
Linking to a Bluetooth Adapter in Serial Port Profile (Slave) Mode ......................................................................................................... 23
Linking to a Bluetooth Adapter in Serial Port Profile (Master) Mode ...................................................................................................... 23
Linking to a Bluetooth Adapter in HID mode ............................................................................................................................................. 24
Power Off ....................................................................................................................................................................................................... 24
CONFIGURATION USING BARCODES ...................................................................................................................................................... 25
Configuration Parameters ............................................................................................................................................................................ 25
GLOBAL INTERFACE FEATURES 27
Host Commands — Obey/Ignore .............................................................................................................................................. 27
USB Suspend Mode ..................................................................................................................................................................... 27
RS-232 Only Interface28
Baud Rate ..................................................................................................................................................................................... 29
Data Bits ....................................................................................................................................................................................... 30
Stop Bits ....................................................................................................................................................................................... 30
Parity ............................................................................................................................................................................................ 31
Handshaking Control .................................................................................................................................................................. 32
RS-232/USB-Com Interfaces33
Intercharacter Delay .................................................................................................................................................................... 34
Beep On ASCII BEL ....................................................................................................................................................................... 34
Beep On Not on File .................................................................................................................................................................... 35
ACK NAK Options ......................................................................................................................................................................... 35
ACK Character .............................................................................................................................................................................. 36
NAK Character ............................................................................................................................................................................. 36
ACK NAK Timeout Value ............................................................................................................................................................. 37
ACK NAK Retry Count .................................................................................................................................................................. 37
ACK NAK Error Handling ............................................................................................................................................................. 38

ii Wasp WDI7500/WWS750
Indicate Transmission Failure ................................................................................................................................................... 38
Disable Character ........................................................................................................................................................................ 39
Enable Character ......................................................................................................................................................................... 39
Keyboard EMULATION Settings ..................................................................................................................................................... 40
Country Mode .............................................................................................................................................................................. 41
Send Control Characters ............................................................................................................................................................. 44
Wedge Quiet Interval .................................................................................................................................................................. 45
Intercode Delay ............................................................................................................................................................................ 45
Caps Lock State ........................................................................................................................................................................... 46
Numlock ....................................................................................................................................................................................... 46
USB Keyboard Speed ................................................................................................................................................................... 47
USB Keyboard Numeric Keypad ................................................................................................................................................. 48
USB-OEM Interface ......................................................................................................................................................................... 49
USB-OEM Device Usage ............................................................................................................................................................. 50
Interface Options ......................................................................................................................................................................... 50
Data Format ..................................................................................................................................................................................... 51
Global Prefix/Suffix (Header/Terminator) .......................................................................................................................................................... 52
Global AIM ID .......................................................................................................................................................................................................... 53
Set AIM ID Individually for GS1-128 ............................................................................................................................................................ 56
Label ID .................................................................................................................................................................................................................... 57
Label ID: Pre-Loaded Sets ............................................................................................................................................................................ 57
Individually Set Label ID ...............................................................................................................................................................................58
Label ID Control ........................................................................................................................................................................... 58
Label ID Symbology Selection − 1D Symbologies .................................................................................................................... 59
Advanced Formatting: User Label Edit ..................................................................................................................................... 63
Case Conversion .......................................................................................................................................................................... 63
Character Conversion .................................................................................................................................................................. 64
Reading Parameters ...................................................................................................................................................................... 65
Double Read Timeout ................................................................................................................................................................. 66
LED AND BEEPER INDICATORS ........................................................................................................................................................... 68
Power On Alert ............................................................................................................................................................................ 68
Good Read: When to Indicate ..................................................................................................................................................... 68
Good Read Beep Type ................................................................................................................................................................. 69
Good Read Beep Frequency ....................................................................................................................................................... 69
Good Read Beep Length ............................................................................................................................................................. 70
Good Read Beep Volume ............................................................................................................................................................ 71
Good Read LED Duration ............................................................................................................................................................ 72
SCANNING FEATURES .......................................................................................................................................................................... 73
Scan Mode .................................................................................................................................................................................... 73
Virtual stand (corded models only) ........................................................................................................................................... 74
Pick Mode ..................................................................................................................................................................................... 74
Stand Mode Sensitivity ............................................................................................................................................................... 75
Stand Mode Illumination Off Time ............................................................................................................................................ 75
Scanning Active Time .................................................................................................................................................................. 76
Stand Illumination Control ......................................................................................................................................................... 76
Flash On Time .............................................................................................................................................................................. 77
Flash Off Time ............................................................................................................................................................................. 77
Aiming Pointer ............................................................................................................................................................................. 78
Aiming Duration Timer ................................................................................................................................................................ 78
Green Spot Duration ................................................................................................................................................................... 79
Partial Label Reading Control .................................................................................................................................................... 79
Decode Negative Image .............................................................................................................................................................. 80
Image Capture ............................................................................................................................................................................. 80
MULTIPLE LABEL READING ................................................................................................................................................................ 81
Multiple Labels per Frame ......................................................................................................................................................... 81
Multiple Labels Ordering by Code Symbology .......................................................................................................................... 82
Multiple Labels Ordering by Code Length ................................................................................................................................ 82
1D Symbologies ............................................................................................................................................................................... 83
DISABLE ALL SYMBOLOGIES ............................................................................................................................................................... 84
CODE EAN/UPC .................................................................................................................................................................................... 85
Coupon Control ............................................................................................................................................................................ 85
UPC-A .................................................................................................................................................................................................... 86
UPC-A Enable/Disable ................................................................................................................................................................ 86
UPC-A Check Character Transmission ...................................................................................................................................... 86
Expand UPC-A to EAN-13 .......................................................................................................................................................... 87
UPC-A Number System Character Transmission .................................................................................................................... 87

Product Reference Guide iii
UPC-A 2D Component ................................................................................................................................................................. 88
UPC-E .................................................................................................................................................................................................... 88
UPC-E Enable/Disable ................................................................................................................................................................ 88
UPC-E Check Character Transmission ...................................................................................................................................... 89
UPC-E 2D Component ................................................................................................................................................................. 89
Expand UPC-E to EAN-13 ........................................................................................................................................................... 90
Expand UPC-E to UPC-A ............................................................................................................................................................. 90
UPC-E Number System Character Transmission .................................................................................................................... 91
GTIN FORMATTING ............................................................................................................................................................................... 91
EAN 13 (JAN 13) .................................................................................................................................................................................... 92
EAN 13 Enable/Disable .............................................................................................................................................................. 92
EAN 13 Check Character Transmission ..................................................................................................................................... 92
EAN-13 Flag 1 Character ............................................................................................................................................................ 93
EAN-13 ISBN Conversion ........................................................................................................................................................... 93
EAN-13 2D Component .............................................................................................................................................................. 94
ISSN ........................................................................................................................................................................................................ 94
ISSN Enable/Disable ................................................................................................................................................................... 94
EAN 8 (JAN 8) ......................................................................................................................................................................................... 95
EAN 8 Enable/Disable ................................................................................................................................................................ 95
EAN 8 Check Character Transmission ....................................................................................................................................... 95
Expand EAN 8 to EAN 13 ............................................................................................................................................................ 96
EAN 8 2D Component ................................................................................................................................................................. 96
UPC/EAN GLOBAL SETTINGS .............................................................................................................................................................. 97
UPC/EAN Price Weight Check .................................................................................................................................................... 97
UPC/EAN Quiet Zones ................................................................................................................................................................ 97
ADD-ONS ............................................................................................................................................................................................... 98
Optional Add-ons ........................................................................................................................................................................ 98
Optional Add-On Timer ............................................................................................................................................................... 99
Optional GS1-128 Add-On Timer ............................................................................................................................................. 101
CODE 39 ............................................................................................................................................................................................... 103
Code 39 Enable/Disable ........................................................................................................................................................... 103
Code 39 Check Character Calculation ...................................................................................................................................... 103
Code 39 Check Character Transmission .................................................................................................................................. 104
Code 39 Start/Stop Character Transmission ......................................................................................................................... 104
Code 39 Full ASCII ...................................................................................................................................................................... 104
Code 39 Quiet Zones ................................................................................................................................................................. 105
Code 39 Length Control ............................................................................................................................................................ 105
Code 39 Set Length 1 ................................................................................................................................................................ 106
Code 39 Set Length 2 ................................................................................................................................................................ 107
TRIOPTIC CODE ................................................................................................................................................................................... 108
Trioptic Code Enable/Disable ................................................................................................................................................... 108
CODE 32 (ITAL PHARMACEUTICAL CODE) ........................................................................................................................................ 108
Code 32 Enable/Disable ........................................................................................................................................................... 108
Code 32 Feature Setting Exceptions ....................................................................................................................................... 108
Code 32 Check Character Transmission .................................................................................................................................. 109
Code 32 Start/Stop Character Transmission ......................................................................................................................... 109
CODE 39 CIP (FRENCH PHARMACEUTICAL) ..................................................................................................................................... 110
Code 39 CIP Enable/Disable ..................................................................................................................................................... 110
CODE 39 DANISH PPT ........................................................................................................................................................................ 110
Code 39 Danish PPT Enable/Disable ...................................................................................................................................... 110
CODE 39 LAPOSTE .............................................................................................................................................................................. 111
Code 39 LaPoste Enable/Disable ............................................................................................................................................ 111
CODE 39 PZN ...................................................................................................................................................................................... 111
Code 39 PZN Enable/Disable ................................................................................................................................................... 111
CODE 128 ............................................................................................................................................................................................. 112
Code 128 Enable/Disable ......................................................................................................................................................... 112
Expand Code 128 to Code 39 .................................................................................................................................................... 112
Code 128 Check Character Transmission ............................................................................................................................... 113
Code 128 Function Character Transmission .......................................................................................................................... 113
Code 128 Sub-Code Exchange Transmission ......................................................................................................................... 113
Code 128 Quiet Zones ............................................................................................................................................................... 114
Code 128 Length Control .......................................................................................................................................................... 114
Code 128 Set Length 1 .............................................................................................................................................................. 115
Code 128 Set Length 2 .............................................................................................................................................................. 116
GS1-128 ............................................................................................................................................................................................... 117
GS1-128 Enable ......................................................................................................................................................................... 117
GS1-128 2D Component ........................................................................................................................................................... 117

iv Wasp WDI7500/WWS750
CODE ISBT 128 .................................................................................................................................................................................... 118
ISBT 128 Concatenation ............................................................................................................................................................ 118
ISBT 128 Force Concatenation ................................................................................................................................................. 118
ISBT 128 Concatenation Mode ................................................................................................................................................. 118
ISBT 128 Dynamic Concatenation Timeout ............................................................................................................................ 119
ISBT 128 Advanced Concatenation Options ........................................................................................................................... 119
INTERLEAVED 2 OF 5 (I 2 OF 5) ......................................................................................................................................................... 120
I 2 of 5 Enable/Disable ............................................................................................................................................................. 120
I 2 of 5 Check Character Calculation ........................................................................................................................................ 120
I 2 of 5 Check Character Transmission .................................................................................................................................... 121
I 2 of 5 Length Control .............................................................................................................................................................. 121
I 2 of 5 Set Length 1 .................................................................................................................................................................. 122
I 2 of 5 Set Length 2 .................................................................................................................................................................. 123
INTERLEAVED 2 OF 5 CIP HR ............................................................................................................................................................ 124
Interleaved 2 of 5 CIP HR Enable/Disable .............................................................................................................................. 124
FOLLETT 2 OF 5 .................................................................................................................................................................................. 124
Follett 2 of 5 Enable/Disable ................................................................................................................................................... 124
STANDARD 2 OF 5 .............................................................................................................................................................................. 125
Standard 2 of 5 Enable/Disable .............................................................................................................................................. 125
Standard 2 of 5 Check Character Calculation ......................................................................................................................... 125
Standard 2 of 5 Check Character Transmission ..................................................................................................................... 126
Standard 2 of 5 Length Control ............................................................................................................................................... 126
Standard 2 of 5 Set Length 1 ................................................................................................................................................... 127
Standard 2 of 5 Set Length 2 ................................................................................................................................................... 128
INDUSTRIAL 2 OF 5 ............................................................................................................................................................................. 129
Industrial 2 of 5 Enable/Disable .............................................................................................................................................. 129
Industrial 2 of 5 Check Character Calculation ........................................................................................................................ 129
Industrial 2 of 5 Check Character Transmission .................................................................................................................... 130
Industrial 2 of 5 Length Control ............................................................................................................................................... 130
Industrial 2 of 5 Set Length 1 ................................................................................................................................................... 131
Industrial 2 of 5 Set Length 2 ................................................................................................................................................... 132
CODE IATA ........................................................................................................................................................................................... 133
IATA Enable/Disable ................................................................................................................................................................. 133
IATA Check Character Transmission ....................................................................................................................................... 133
CODABAR ............................................................................................................................................................................................ 134
Codabar Enable/Disable ........................................................................................................................................................... 134
Codabar Check Character Calculation ..................................................................................................................................... 134
Codabar Check Character Transmission ................................................................................................................................. 134
Codabar Start/Stop Character Transmission ......................................................................................................................... 135
Codabar Start/Stop Character Set .......................................................................................................................................... 135
Codabar Start/Stop Character Match ..................................................................................................................................... 135
Codabar Quiet Zones ................................................................................................................................................................ 136
Codabar Length Control ............................................................................................................................................................ 136
Codabar Set Length 1 ................................................................................................................................................................ 137
Codabar Set Length 2 ................................................................................................................................................................ 138
ABC CODABAR .................................................................................................................................................................................... 139
ABC Codabar Enable/Disable ................................................................................................................................................... 139
ABC Codabar Concatenation Mode .......................................................................................................................................... 139
ABC Codabar Dynamic Concatenation Timeout ..................................................................................................................... 140
ABC Codabar Force Concatenation .......................................................................................................................................... 140
CODE 11 ............................................................................................................................................................................................... 141
Code 11 Enable/Disable ........................................................................................................................................................... 141
Code 11 Check Character Calculation ...................................................................................................................................... 141
Code 11 Check Character Transmission .................................................................................................................................. 142
Code 11 Length Control ............................................................................................................................................................ 142
Code 11 Set Length 1 ................................................................................................................................................................ 143
Code 11 Set Length 2 ................................................................................................................................................................ 144
GS1 DATABAR™ OMNIDIRECTIONAL ................................................................................................................................................. 145
GS1 DataBar™ Omnidirectional Enable/Disable .................................................................................................................... 145
GS1 DataBar™ Omnidirectional GS1-128 Emulation ............................................................................................................. 145
GS1 DataBar™ Omnidirectional 2D Component ..................................................................................................................... 146
GS1 DATABAR™ EXPANDED .............................................................................................................................................................. 146
GS1 DataBar™ Expanded Enable/Disable ............................................................................................................................... 146
GS1 DataBar™ Expanded GS1-128 Emulation ........................................................................................................................ 147
GS1 DataBar™ Expanded 2D Component ................................................................................................................................ 147
GS1 DataBar™ Expanded Length Control ................................................................................................................................ 148
GS1 DataBar™ Expanded Set Length 1 .................................................................................................................................... 149

Product Reference Guide v
GS1 DataBar™ Expanded Set Length 2 .................................................................................................................................... 150
GS1 DATABAR™ LIMITED .................................................................................................................................................................... 151
GS1 DataBar™ Limited Enable/Disable ................................................................................................................................... 151
GS1 DataBar™ Limited GS1-128 Emulation ............................................................................................................................ 151
GS1 DataBar™ Limited 2D Component .................................................................................................................................... 152
CODE 93 ............................................................................................................................................................................................... 152
Code 93 Enable/Disable ........................................................................................................................................................... 152
Code 93 Check Character Calculation ...................................................................................................................................... 153
Code 93 Check Character Transmission .................................................................................................................................. 153
Code 93 Length Control ............................................................................................................................................................ 154
Code 93 Set Length 1 ................................................................................................................................................................ 155
Code 93 Set Length 2 ................................................................................................................................................................ 156
Code 93 Quiet Zones ................................................................................................................................................................. 157
MSI ....................................................................................................................................................................................................... 157
MSI Enable/Disable .................................................................................................................................................................. 157
MSI Check Character Calculation ............................................................................................................................................. 158
MSI Check Character Transmission ......................................................................................................................................... 158
MSI Length Control ................................................................................................................................................................... 159
MSI Set Length 1 ....................................................................................................................................................................... 160
MSI Set Length 2 ....................................................................................................................................................................... 161
PLESSEY .............................................................................................................................................................................................. 162
Plessey Enable/Disable ............................................................................................................................................................ 162
Plessey Check Character Calculation ...................................................................................................................................... 162
Plessey Check Character Transmission .................................................................................................................................. 163
Plessey Length Control ............................................................................................................................................................. 163
Plessey Set Length 1 ................................................................................................................................................................ 164
Plessey Set Length 2 ................................................................................................................................................................ 165
2D Symbologies ............................................................................................................................................................................. 166
2D Global Features ...............................................................................................................................................................................................166
2D Maximum Decoding Time ................................................................................................................................................... 167
2D Structured Append .............................................................................................................................................................. 168
2D Normal/Inverse Symbol Control ........................................................................................................................................ 168
AZTEC CODE ........................................................................................................................................................................................ 169
Aztec Code Enable / Disable .................................................................................................................................................... 169
Aztec Code Length Control ....................................................................................................................................................... 169
Aztec Code Set Length 1 ........................................................................................................................................................... 170
Aztec Code Set Length 2 ........................................................................................................................................................... 171
CHINA SENSIBLE CODE ...................................................................................................................................................................... 172
China Sensible Code Enable / Disable .................................................................................................................................... 172
China Sensible Code Length Control ....................................................................................................................................... 172
China Sensible Code Set Length 1 ........................................................................................................................................... 173
China Sensible Code Set Length 2 ........................................................................................................................................... 174
DATA MATRIX ...................................................................................................................................................................................... 175
Data Matrix Enable / Disable ................................................................................................................................................... 175
Data Matrix Square/Rectangular Style .................................................................................................................................. 175
Data Matrix DPM Decoding Safety .......................................................................................................................................... 176
Data Matrix Length Control ...................................................................................................................................................... 177
Data Matrix Set Length 1 ......................................................................................................................................................... 177
Data Matrix Set Length 2 ......................................................................................................................................................... 178
MAXICODE ........................................................................................................................................................................................... 179
Maxicode Enable / Disable ....................................................................................................................................................... 179
Maxicode Primary Message Transmission ............................................................................................................................ 179
Maxicode Length Control .......................................................................................................................................................... 180
Maxicode Set Length 1 ............................................................................................................................................................. 180
Maxicode Set Length 2 ............................................................................................................................................................. 181
PDF417 ................................................................................................................................................................................................ 182
PDF417 Enable / Disable ......................................................................................................................................................... 182
PDF417 Length Control ............................................................................................................................................................ 182
PDF417 Set Length 1 ................................................................................................................................................................ 183
PDF417 Set Length 2 ................................................................................................................................................................ 184
MICRO PDF417 ................................................................................................................................................................................... 185
Micro PDF417 Enable / Disable ............................................................................................................................................... 185
Micro PDF417 Code 128 GS1-128 Emulation ......................................................................................................................... 185
Micro PDF417 Length Control .................................................................................................................................................. 186
Micro PDF417 Set Length 1 ...................................................................................................................................................... 186
Micro PDF417 Set Length 2 ...................................................................................................................................................... 187
QR CODE .............................................................................................................................................................................................. 188

vi Wasp WDI7500/WWS750
QR Code Enable / Disable ........................................................................................................................................................ 188
QR Code Length Control ........................................................................................................................................................... 188
QR Code Set Length 1 ............................................................................................................................................................... 189
QR Code Set Length 2 ............................................................................................................................................................... 190
MICRO QR CODE ................................................................................................................................................................................. 190
Micro QR Code Enable/Disable ................................................................................................................................................ 190
Micro QR Code Length Control ................................................................................................................................................. 191
Micro QR Code Set Length 1 ..................................................................................................................................................... 191
Micro QR Code Set Length 2 ..................................................................................................................................................... 192
UCC COMPOSITE ................................................................................................................................................................................. 193
UCC Composite Enable / Disable ............................................................................................................................................. 193
UCC Optional Composite Timer ................................................................................................................................................ 194
POSTAL CODE SELECTION ................................................................................................................................................................. 195
Postnet BB Control ................................................................................................................................................................... 196
DIGITAL WATERMARK READING ....................................................................................................................................................... 197
Digimarc Compatibility Mode ................................................................................................................................................... 197
Motion Features ........................................................................................................................................................................... 198
Motion Aiming Control .............................................................................................................................................................. 198
Motion Sensitivity ..................................................................................................................................................................... 199
Motionless Timeout .................................................................................................................................................................. 199
Wireless Features ......................................................................................................................................................................... 200
WIRELESS BEEPER FEATURES ......................................................................................................................................................... 202
Good Transmission Beep .......................................................................................................................................................... 202
Beep Frequency ......................................................................................................................................................................... 202
Beep Duration ............................................................................................................................................................................ 203
Beep Volume .............................................................................................................................................................................. 204
Disconnect Beep ........................................................................................................................................................................ 204
Docking Beep ............................................................................................................................................................................. 205
Leash Alarm ............................................................................................................................................................................... 205
CONFIGURATION UPDATES ............................................................................................................................................................... 207
Automatic Configuration Update ............................................................................................................................................. 207
Copy Configuration to Scanner ................................................................................................................................................ 207
Copy Configuration to Base Station ........................................................................................................................................ 207
BATCH FEATURES .............................................................................................................................................................................. 208
Batch Mode ................................................................................................................................................................................ 208
Send Batch ................................................................................................................................................................................. 208
Erase Batch Memory ................................................................................................................................................................ 209
RF Batch Mode Transmit Delay ............................................................................................................................................... 209
DIRECT RADIO AUTOLINK .................................................................................................................................................................. 210
RF ADDRESS STAMPING .................................................................................................................................................................... 210
Source Radio Address Transmission ...................................................................................................................................... 210
Source Radio Address Delimiter Character ............................................................................................................................ 211
REAL TIME CLOCK (RTC) CONFIGURATION ....................................................................................................................................... 212
Current Date .............................................................................................................................................................................. 212
Current Time .............................................................................................................................................................................. 212
Date Tx Format .......................................................................................................................................................................... 213
Time Tx Format .......................................................................................................................................................................... 213
Date-Time Separator ................................................................................................................................................................ 214
Date-Time Transmission Order ............................................................................................................................................... 215
Power Off ................................................................................................................................................................................... 216
Powerdown Timeout ................................................................................................................................................................. 216
Bluetooth Features........................................................................................................................................................................ 217
BLUETOOTH SECURITY FEATURES ................................................................................................................................................... 217
Bluetooth Security Mode .......................................................................................................................................................... 218
Bluetooth PIN Code ................................................................................................................................................................... 218
Select PIN Code Length ............................................................................................................................................................ 218
Set PIN Code .............................................................................................................................................................................. 219
OTHER BLUETOOTH FEATURES ........................................................................................................................................................ 220
Reconnect Attempt Interval ..................................................................................................................................................... 220
Bluetooth HID Variable PIN Code ............................................................................................................................................ 221
Bluetooth HID Alt Mode ............................................................................................................................................................ 222
Bluetooth HID Send Unknown ASCII Char .............................................................................................................................. 222
Bluetooth Max Client ................................................................................................................................................................ 223
Bluetooth Friendly Name ......................................................................................................................................................... 224
Bluetooth Reconnect Attempt Mode ...................................................................................................................................... 224
Power Class ............................................................................................................................................................................... 225
HID Country Mode ..................................................................................................................................................................... 225

Product Reference Guide vii
REFERENCES......................................................................................................................................................................................... 228
RS-232 Parameters .............................................................................................................................................................................................229
RS-232 Only .................................................................................................................................................................................................229
RS-232/USB COM Parameters ..................................................................................................................................................................230
Keyboard Interface ...............................................................................................................................................................................................237
Wedge Quiet Interval ..................................................................................................................................................................................237
Intercharacter Delay ...................................................................................................................................................................................238
Intercode Delay ............................................................................................................................................................................................239
Symbologies .........................................................................................................................................................................................................240
Datamatrix DPM Decoding Safety .............................................................................................................................................................240
Set Length ....................................................................................................................................................................................................240
Data Editing ..........................................................................................................................................................................................................242
Global Prefix/Suffix .....................................................................................................................................................................................243
Global AIM ID ................................................................................................................................................................................................243
Label ID .........................................................................................................................................................................................................245
Character Conversion ..................................................................................................................................................................................250
Reading Parameters ............................................................................................................................................................................................251
Good Read LED Duration ............................................................................................................................................................................251
Scanning Features ...............................................................................................................................................................................................252
Scan Mode ....................................................................................................................................................................................................252
Stand Mode Off Time ..................................................................................................................................................................................253
Scanning Active Time ..................................................................................................................................................................................254
Aiming Duration Time .................................................................................................................................................................................255
Flash On Time ..............................................................................................................................................................................................256
Flash Off Time .............................................................................................................................................................................................257
Multiple Labels Ordering by Code Symbology ..........................................................................................................................................258
Motion Features ...................................................................................................................................................................................................260
Motionless Timeout ....................................................................................................................................................................................260
Wireless Features ................................................................................................................................................................................................261
Automatic Configuration Update ...............................................................................................................................................................261
RF Address Stamping .................................................................................................................................................................................261
Bluetooth Features .....................................................................................................................................................................................262
TECHNICAL SPECIFICATIONS ............................................................................................................................................................... 263
Imager Labeling ....................................................................................................................................................................................................267
Standard Cable Pinouts .......................................................................................................................................................................................268
LED and Beeper Indications ................................................................................................................................................................................269
Error Codes ...........................................................................................................................................................................................................270
Base Station Indications (Cordless Models ONLY) ..................................................................................................................................270
SAMPLE BARCODES.............................................................................................................................................................................. 271
STANDARD DEFAULTS.......................................................................................................................................................................... 275
KEYPAD.................................................................................................................................................................................................. 287
SCANCODE TABLES............................................................................................................................................................................... 289
Control Character Emulation ..............................................................................................................................................................................289
Single Press and Release Keys ..................................................................................................................................................................289
Interface Type PC AT PS/2, USB-Keyboard or USB-Keyboard for APPLE ......................................................................................................290
Interface Type PC AT PS/2 Alt Mode or USB-Keyboard Alt Mode ..................................................................................................................292
Digital Interface ....................................................................................................................................................................................................294
IBM31xx 102-key .................................................................................................................................................................................................295
IBM XT ...................................................................................................................................................................................................................296
Microsoft Windows Codepage 1252 ..................................................................................................................................................................297

viii Wasp WDI7500/WWS750
NOTES

Product Reference Guide 1
Chapter 1
Introduction
About this Manual
This Product Reference Guide (PRG) is provided for users seeking advanced
technical information, including connection, programming, maintenance
and specifications. The Quick Reference Guide (QRG) and other publications
associated with this product are downloadable free of charge from the web-
site listed on the back cover of this manual.
Overview
Chapter 1, (this chapter) presents information about manual conventions,
and an overview of the reader, its features and operation.
Chapter 2, Setup presents information about unpacking, cable connection
information and setting up the reader.
Chapter 3, Configuration Using Barcodes provides instructions and barcode
labels for customizing your reader. There are different sections for interface
types, general features, data formatting, symbology-specific and model-
specific features.
Chapter 4, References provides background information and detailed
instructions for more complex programming items.
Chapter 5, Message Formatting gives details for programming options.
Appendix A, Technical Specifications lists physical and performance charac-
teristics, as well as environmental and regulatory specifications. It also pro-
vides standard cable pinouts and LED/Beeper functions.
Appendix B, Sample Barcodes offers sample barcodes for several common
symbologies.
Appendix C, Standard Defaults references common factory default settings
for reader features and options.
Appendix D, Keypad includes numeric barcodes to be scanned for certain
parameter settings.
Appendix E, Scancode Tables lists control character emulation information
for Wedge and USB Keyboard interfaces.

Introduction
2 Wasp WDI7500/WWS750
Manual Conventions
The following conventions are used in this document:
The symbols listed below are used in this manual to notify the reader of key
issues or procedures that must be observed when using the reader:
Notes contain information necessary for properly diagnosing,
repairing and operating the reader.
CAUTION
The CAUTION symbol advises you of actions that could damage
equipment or property.
References
Current versions of this Product Reference Guide (PRG), Quick Reference
Guide (QRG), and any other manuals, instruction sheets or utilities for this
product can be downloaded from the Wasp website.
Services and Support
Wasp provides several services as well as technical support through its web-
site. Log on to www.waspbarcode.com and click on the links indicated for
further information.

About the Reader
Product Reference Guide 3
About the Reader
The Wasp WDI7500/WWS750 Retail series is the first handheld scanner fam-
ily on the market capable of reading digital watermarks, including Digimarc®
Barcode. It is a family of feature-rich and rugged area imager reader. The
Wasp WDI7500/WWS750 Retail are offered in several different models to
better fit the different needs of each customer.
The main model categories are:
• WDI7500: Corded models.
• WWS750: Bluetooth models.
Typically, units are factory-programmed for the most common terminal and
communications settings. If you need to modify any programmable settings,
custom configuration can be done by scanning the programming barcodes
within this guide.
Advancements in the LED technology used in the imager-based readers sig-
nificantly improve the illumination of the target field of view, resulting in
higher scan efficiency. Whether used in Single Trigger or Continuous Mode,
the ergonomic design of the reader will help to promote comfortable han-
dling during extended periods of use.
In addition, the reader can be set up to read and output data from USA
Driver License PDF417 barcodes.
See "Interface Selection" on page 18 for a listing and descriptions of avail-
able interface sets by model type.

Introduction
4 Wasp WDI7500/WWS750
The WWS750-BS Base Station/Charger
The WWS750-BS Base Station, when paired with one or more Wasp™ Retail
readers, builds a Cordless Reading System for the collection, decoding and
transmission of barcode data. It can be connected to a Host PC via RS-232,
USB, or KBD Wedge, and is suited for single-cradle layouts. .
The label on the cradle contains LED indicators and a multi-function button.
When the button is pressed for less than 5 seconds, the cradle will transmit a
"broadcast" message." When the broadcast is sent, all properly configured
scanners (Radio RX Timeout set to keep the radio "awake") that are linked to
that base and within radio range coverage will emit a beep and blink within 5
seconds. This functionality is useful to:
• verify which scanners are linked to a certain
base station
• detect a scanner forgotten somewhere
When the button is pressed for longer than 5 sec-
onds, all paired scanners will be unpaired.
The LEDs signal the Base Station status, as shown in Table 1 on page 4.
Table 1. LED Status
LED STATUS
Aux Yellow On = WWS750-BS is powered through an external power supply.
Host Yellow On = WWS750-BS is powered by the Host.
Reader
Green On = the reader battery is completely charged.
Red On = the reader battery is charging.
Orange Blinking = reader battery fault - replace battery.
Red / Green Alternatively Blinking = charging error - see "
Error Codes"
on page 270 .
Off = reader not in the cradle or not properly inserted.
Radio Yellow Blinking = radio activity.
Ethernet

(Ethernet
models
only)
Green Blinking = Ethernet activity.
See "Base Station Indications (Cordless Models ONLY)" on page 270 for more
specific details on the LEDs.

Battery Safety
Product Reference Guide 5
Battery Safety
To reinstall, charge and/or perform any other action on the battery, follow
the instructions in this manual.
WARNING
CAUTION
Always charge the battery at 32° – 104°F (0° - 40°C) temperature range.
Use only the authorized power supplies, battery pack, chargers, and docks supplied by
your Wasp reseller. The use of any other power supplies can damage the device and void
your warranty.
Do not disassemble or modify the battery. The battery contains safety and protection
devices, which, if damaged, may cause the battery to generate heat, explode or ignite.
Do not place the battery in or near fire, on stoves or other high temperature locations.
Do not place the battery in direct sunlight, or use or store the battery inside cars in hot
weather. Doing so may cause the battery to generate heat, explode or ignite. Using the
battery in this manner may also result in a loss of performance and a shortened life
expectancy.
Do not place the battery in microwave ovens, high-pressure containers or on induction
cookware.
Immediately discontinue use of the battery if, while using, charging or storing the battery,
the battery emits an unusual smell, feels hot, changes color or shape, or appears abnor-
mal in any other way.
Do not replace the battery pack when the device is turned on.
Do not remove or damage the battery pack’s label.
Do not use the battery pack if it is damaged in any part.
Battery pack usage by children should be supervised.
Do not discharge the battery using any device except for the scanner. When the battery
i
s used in devices other than the designated product, it may damage the battery or
reduce its life expectancy. If the device causes an abnormal current to flow, it may cause
the battery to become hot, explode or ignite and cause serious injury.

Lithium-ion battery packs may get hot, explode or ignite and cause serious injury if
exposed to abusive conditions. Be sure to follow the safety warnings listed below:
• Do not place the battery pack in fire or heat.
• Do not connect the positive terminal and negative terminal of the battery pack to each
other with any metal object (such as wire).
• Do not carry or store the battery pack together with metal objects.
• Do not pierce the battery pack with nails, strike it with a hammer, step on it or other-
wise subject it to strong impacts or shocks.
• Do not solder directly onto the battery pack.
• Do not expose the battery pack to liquids, or allow the battery to get wet.
• Do not apply voltages to the battery pack contacts.
In the event the battery pack leaks and the fluid gets into your eye, do not rub the eye.
Rinse well with water and immediately seek medical care. If left untreated, the battery
fluid could cause damage to the eye.
Before installing the Battery, read “Battery Safety” on this and the following pages.
Wasp recommends annual replacement of rechargeable battery packs to ensure maxi-
mum performance.
As with other types of batteries, Lithium-Ion (LI) batteries will lose capacity
over time. Capacity deterioration is noticeable after one year of service
whether the battery is in use or not. It is difficult to precisely predict the
finite life of a LI battery, but cell manufacturers rate them at 500 charge
cycles. In other words, the batteries should be expected to take 500 full dis-

Introduction
6 Wasp WDI7500/WWS750
charge / charge cycles before needing replacement. This number is higher if
partial discharging / recharging is adhered to rather than full / deep dis-
charging,
The typical manufacturer advertised useful life of LI batteries is one to three
years, depending on usage and number of charges, etc., after which they
should be removed from service, especially in mission critical applications.
Do not continue to use a battery that is showing excessive loss of capacity, it
should be properly recycled / disposed of and replaced. For most applica-
tions, batteries should be replaced after one year of service to maintain cus-
tomer satisfaction and minimize safety concerns.
Collect and recycle waste batteries separately from the device in compliance
with European Directive 2006/66/EC, 2011/65/EU, 2002/96/EC and 2012/
19/EU and subsequent modifications, US and China regulatory and others
laws and regulations about the environment.
Programming the Reader
Programming Barcodes
The reader is factory-configured with a standard set of default features.
After scanning the interface barcode, you can select other options and cus-
tomize your reader through use of the instructions and programming bar-
code labels available in the corresponding features section for your
interface. Customizable settings for many features are found in "Configura-
tion Parameters" starting on page 25.
Some programming labels, like "Restore Custom Defaults" on page 22,
require only the scan of the single label to enact the change. Most, however,
require the reader to be placed in Programming Mode prior to scanning
them. Scan an ENTER/EXIT barcode once to enter Programming Mode. Once
the reader is in Programming Mode, scan a number of parameter settings
before scanning the ENTER/EXIT barcode a second time, which will then
accept your changes, exit Programming Mode and return the reader to nor-
mal operation.
There are some exceptions to the typical programming sequence
described above. Please read the description and setting instructions
carefully when configuring each programmable feature.

Product Reference Guide 7
Chapter 2
Setup
Unpacking
Check carefully to ensure the reader and any accessories ordered are pres-
ent and undamaged. If any damage occurred during shipment, contact Wasp
Technical Support. Information is shown on page 3.
KEEP THE PACKAGING. Should the unit ever require service, it should be
returned in its original shipping container.
Setting Up the Reader
Follow the steps below to connect and get your reader up and communicat-
ing with its host.
1. Begin by Installing the Interface Cable (Corded) or Connecting the Base
Station (Bluetooth and STAR)
2. Configure Interface Settings (see page 18).
3. Configure the Reader starting on page 21 (optional, depends on set-
tings needed)
Connect the Wasp scanner by plugging directly into the host device as
shown. The power can also be supplied through an external power supply
via the Interface Cable supplied with a power jack.

Setup
8 Wasp WDI7500/WWS750
Connecting the Cable (Corded versions)
A
B
C
D
A. Rubber gasket
B. Cable Holder
C. Cover
D. Connector Holder
1. Slip the cable through the Cover.
2. Push the Rubber Gasket onto the Cable
Holder.
3. Push the Cable Holder and gasket into
the handle. Ensure that the “Front”
marking on the Cable Holder is facing
out, with the arrow pointing towards the
front of the scanner.
4. Insert the end of the cable into the
socket of the Cable Holder.
5. Push the Cover along the cable towards
the reader, and hook it over the yellow
“tooth” on the back of the handle.
6. Insert the cable through the Connector
Holder, and push it up into the Cover.
7. Insert and tighten the screw to affix the
cable assembly to the reader handle.
FRONT>>
1
2
3
6
4
5
7

Configuring the Horizontal Base Station
Product Reference Guide 9
Configuring the Horizontal Base Station
To set up your WWS750-BS Base Station you must:
1. Physically install the cradle.
2. Make all system connections.
3. Configure the WWS750-BS cradle.
Mounting the WWS750-BS Cradle
The cradle package contains the following items:
WWS750-BS Base Station (with Desktop
Mounting Bracket installed) 1 Metal Mounting plate
WWS750-BS Quick Reference Guide

(this manual) 1 Wall Mounting Bracket
The cradle can be either mounted on a flat surface for desktop usage or
affixed vertically to a wall.
Mounting Brackets
The cradle comes with two different mounting brackets. The appropriate
bracket is used depending on whether the cradle will be mounted on a hori-
zontal or vertical surface. When shipped, the cradle has the Desktop Mount-
ing Bracket installed. For vertical installation, the Wall Mounting Bracket
must be attached instead.
Figure 1. Mounting Brackets
Desktop Mounting Bracket
Wall Mounting Bracket
Bosses
(Horizontal )
(Vertical)
Tab Tab
Tab
Ribs
• Desktop mount bracket has ribs to keep the scanner in place when the
cradle is horizontal.
• Wall mount bracket contains bosses to keep the scanner in place when
the cradle is vertical.

Setup
10 Wasp WDI7500/WWS750
To change the Bracket:
1. Remove the screw holding the Bracket in place. Retain the screw for re-
use.
2. Carefully lift off the Bracket.
3. Install the other bracket by first slipping the end tab into place on the
base station, then easing the tabs (shown in Figure 1 on page 9) into
place on the sides.
4. Replace the screw to secure the Bracket to the Base Station.
Figure 2. Changing the Bracket
12
3
Permanent Mounting
For either desktop or wall mounting, the cradle can be fastened directly to a
flat surface using screws (not included).
When mounting on drywall, the base should be screwed to a wall stud or
supporting beam for additional support.
Figure 3. Base Station Bottom
Mounting
Protective Adhesive
Rubber Feet
Rubber Feet
Strips Holes