Waterpik Waterflosser WP-810 User manual

Insert
6
Water ON
QUICK START GUIDE
Review full instruction book prior to first use.
1
©2017 Water Pik, Inc.Model WP-810/811/812
This device is only compatible with voltages of 100-240 VAC, 50/60 Hz
Fill reservoir with
warm water and
replace it firmly
on the base.
Insert tip firmly
until it clicks into
place.
Turn pressure to high, point
tip into sink, turn power
and water switches on until
water flows. Then turn off.
FIRST USE

8
6
QUICK START GUIDE
Review full instruction book prior to first use.
3
4
2
20022935-F AA
Aim water at the gumline at a 90°
angle. Follow the gumline and pause
briefly between teeth.
SEE HOW TO VIDEO:
Waterpik.com/HowTo811
Turn power and water on.
Start on low pressure and
increase to your liking.
TO AVOID MESS: PLACE THE
TIP IN YOUR MOUTH BEFORE
TURNING UNIT ON
START WATER FLOSSING
TECHNIQUE HOW TO
Close lips enough to
prevent splashing, while
still allowing water to flow
from mouth into the sink.
LEAN OVER SINK