weBoost DRIVE 3G-S User manual

Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153
ENGLISH
Drive 3G-S™
Cellular Signal Booster

2Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153
ENGLISH
Contents
Package Contents .............................................................. 3
Installation Options............................................................. 4
Vehicle Installation Option .................................................... 4
In-Building Installation Option .................................................. 5
Adjusting the Drive 3G-S Arms ................................................... 6
Troubleshooting & Understanding the Light ........................................ 6
Additional FAQ................................................................. 6
Optional Accessories ........................................................... 7
Safety and Recommendations .................................................... 8
Signal Booster Specifications .................................................... 9
Warranty .............................................................. Back Cover
IT IS VERY IMPORTANT
TO POWER YOUR SIGNAL
BOOSTER USING A SURGE
PROTECTED AC POWER
STRIP WITH AT LEAST A 1000
JOULE RATING.
FAILURETO DO THIS WILL VOID YOUR WARRANTY
IN THE EVENT OF A POWERSURGE OR LIGHTNING
STRIKE.
! ! THE SIGNAL BOOSTER UNIT IS DESIGNED
FOR USE IN AN INDOOR, TEMPERATURE-
CONTROLLED ENVIRONMENT (LESS
THAN 150 DEGREES FAHRENHEIT). ITIS
NOT INTENDED FOR USE IN ATTICS ORSIMILAR
LOCATIONS SUBJECT TO TEMPERATURES IN
EXCESS OF 150°F.
Installation Instructions for the Following weBoost Signal Booster:
Drive 3G-S™Cellular Signal Booster 800 / 1900 MHz
Model #470006 FCC: PWO460006 IC: 4726A-460006

Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153 3
ENGLISH ENGLISH
Mini-Magnet Mount Antenna
(301126)
Vehicle Dash
Adhesive
Mounting Bracket
DC Plug-In Power Supply
& USB cable
(2D9910 / 291170)
Drive 3G-S™
Inside thisPackage
Appearance of device and accessories may vary.
Optional Accessories
AC Power Supply
(2D9109)
Gooseneck
Suction Cup
Cradle Mount
(901120)
Cup Holder
Cradle Mount
(901130)
Adjustable
Desk Mount
(901137)
Antenna Window Mount
(Used with Mini-Magnet
Mount Antenna)
(901128)
Vehicle Dash
Mounting Kit
-Rugged/Screw Mount-
-Adhesive Mount-
(901134)
(included in some kits)
All 3 available together in the Home Accessory Kit - 859100
Carrying case included
Mobile Power
Supply
(859984)

4Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153
ENGLISH
Installation Options
Vehicle Installation Option
1. Attach the Mounting Bracket to the
vehicle’s dashboard.
• Clean the area where the bracket is
to be mounted with the alcohol wipe
included. Allow the area to dry.
• Peel the backing to expose the adhesive
and press the bracket onto the desired
location on the dashboard. NOTE: Be
sure the tab is positioned vertically.
• Allow the adhesive to cure for 24 hours
before you attach the Drive 3G-S
(Step 4).
2. Install the Outside Antenna. Select a
location on top of the car that is:
• Near the center of the vehicle’s roof.
• At least 12 inches from any other
antennas.
• Free of obstructions.
• At least 6 inches from any windows
(including sunroofs).
The Outside Antenna must be installed
vertically.
3. Run the Outside Antenna cable into the
car. The cable is strong enough that it
may be shut in most vehicle doors without
damaging the cable. For a cleaner look,
carefully pull down the door seal, run the
cable under the seal, and push the seal
back into place. This method reduces wear
on the cable as the door opens and closes.
4. Attach the Drive 3G-S to the Mounting
Bracket. After waiting 24 hours for the
adhesive on the bracket to cure, attach
the Drive 3G-S by aligning the rectangular
hole on the back of the Drive 3G-S with
the tab on the Mounting Bracket, grasping
the sides of the Drive 3G-S, and sliding it
downward approximately ¼ inch into place.
The Mounting Bracket is designed to
swivel for more convenient viewing angles.
Once the Drive 3G-S is in place, you
can adjust the angle of the bracket by
loosening the knurled nut, applying gentle
pressure to the top or bottom of the Drive
3G-S, and then tightening the nut when the
desired angle is achieved.
5. Attach the antenna to the Drive 3G-S.
Connect the cable from the Outside
Antenna to the antenna connector on the
bottom of the Drive 3G-S. Do NOT plug
in the power supply (next step) until the
Outside Antenna cable is connected to the
Drive 3G-S.
Note: The Drive 3G-S has a convenient mini-
USB charging port located on the right
side of your booster. This port allows
for charging your phone or device.
weBoost offers several cables for this
purpose.
• 859966, mini-USB to mini-USB
• 859979, mini-USB to iPhone (up to 4S)
• 859967, mini-USB to micro-USB

Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153 5
ENGLISH ENGLISH
surface of the bracket. The antenna must
be mounted vertically for the best signal.
2. Install the Mounting Bracket and Drive 3G-S.
Put your Drive 3G-S in the Mounting Bracket
(see instructions under Vehicle Installation)
and place it in a convenient location such as
a desk or table top in the room where you
will use the phone. The location should be at
least three feet from the Outside Antenna to
avoid oscillation (feedback). Your cell phone
must be in the cradle for the Drive 3G-S to
amplify the signal. Use a Bluetooth headset,
wired hands-free device or speakerphone for
talking on the phone.
3. Attach the antenna to the Drive 3G-S.
Connect the cable from the Outside
Antenna to the antenna connector on the
bottom of the Drive 3G-S. Do NOT plug
in the power supply (next step) until the
Outside Antenna cable is connected to the
Drive 3G-S.
4. Power up your Drive 3G-S. Connect the
power cable to the mini-USB port on the
bottom of the Drive 3G-S. Then insert
the adapter into the AC power supply
(859969), sold separately. Use only the
supplied weBoost power supply.
6. Power up your Drive 3G-S. Connect the
power cable to the mini-USB port on the
bottom of the Drive 3G-S. Then insert the
adapter into the vehicle 12V DC power
source. Use only the supplied weBoost
power supply. While the Drive 3G-S may
remain on, leaving the Drive 3G-S on
in a vehicle when it is not running may
discharge the battery in a day or two. Also
note that some 12V DC power sources
are shut down when the vehicle ignition
is turned to off. Use a Bluetooth headset,
wired hands-free device or speakerphone for
talking on the phone.
In-Building Installation Option
Note:
separately
1. Install the Outside Antenna to a window. For
best results:
• Select a window on the side of the building
where you get the strongest cell signal.
• Attach the suction cup bracket (sold
separately) tothe inside of a window so
the cable will reach the location of the
Mounting Bracket and Drive 3G-S. Place
the bracket as high on the window as
possible.
pane windows use a metal coating that
may decrease the strength of a cellular
signal, reducing the effectiveness of
the Drive 3G-S. If you have dual pane
windows, consider a weBoost signal
boost product that provides an option for
mounting an antenna on an outside wall or
roof of a building.
• With the bracket in place, attach the

6Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153
ENGLISH
Green/red Blinking indicates that the
booster is operating at a reduced gain to
prevent oscillation (feedback).
Fixing Red Light Issues
If one or more lights on the Signal Boost are red:
1. Make sure all connections are tight.
2. Increase the distance between the outside
antenna and the Drive 3G-S, by moving
them horizontally and/or vertically farther
apart until the light(s) change to green.
Remember tokeep the antenna at least
6 inches from any window or sunroof.
3. Follow the same steps for a green/red
blinking light until the light goes solid
green.
4. If more separation is not possible and the
coverage of the booster is too small with a
green/red blinking light indicating reduced
gain, contact the weBoost Customer
Support Team for assistance:
800-501-3153.
Lights Off
1. Check connections on the power supply
Drive 3G-S and the power source.
2. If using a DC power supply in your
vehicle, ensure the power supply is
properly inserted. Then check the 12 volt
power from the car socket and the fuse.
Replace the fuse if necessary.
3. If using a power strip in a building, ensure
the power strip is plugged in and turned
on and that power is coming from the
outlet.
NOTE: The Signal Booster can be reset by
disconnecting and reconnecting the power
supply.
For additional descriptions on troubleshooting,
see the install video at:
Additional FAQ:
What hours can I contact customer support?
Customer Support can be reached from 7:00am
to 6:00pm MST by calling (800-501-3153), or by
email, at [email protected]
Adjusting the Drive 3G-S Arms
To change arms, gently lift the arm upward until
the arm slides free from the Drive 3G-S.
To reposition arms, move the arm above a
different slot on the Drive 3G-S and gently
place.
Troubleshooting &
Understanding the Light
The Signal Boost includes a indicator light on
the side of the Drive 3G-S. The indicator light
will either be green or red.
Green indicates that the booster is
powered and operating at maximum gain.
Solid Red indicates that the booster has
shut off on the associated frequencies to
prevent oscillation (feedback).
https://cellphonesignalbooster.us

Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153 7
ENGLISH ENGLISH
How does weather affect the performance of my
Outside Antenna?
Water vapor (e.g. rain, fog, snow or other
signal. In times of heavy precipitation, you may
see less performance.
What’s the difference between the 800 MHz and
the 1900 MHz bands? How do I know which MHz
band my cell phone uses?
The Drive 3G-S works with all major North
American cellular providers on the 800 & 1900
MHz frequencies. Traditionally, 800/1900MHz are
associated with voice and 3G data; while 700MHz
and 1700/2100MHz are associated with 4G data.
For more detail see below.
Carrier Frequency Use
We recommend visiting https://cellphonesignal
band used by your cell service provider in a specific
geographical location.
.
Mobile Antennas
Mini-Mag
• 301126 w/ 12.5 RG174
cable- SMA
• 301113 w/ 12.5 RG174
cable - FME
12” Mag Mount w/ 12.5’ RG174
• 311103
• 311125
• 311128
• 311703
• 314202
Trucker antenna w/10.5’ RG58
• 311101
• 311701
Trucker antenna w/13.5’ RG58
• 311119
• 311133
NMO Antenna’s w/ RG174
Kit311104-17410
• 800/1900 NMO antenna
• 10’ RG174 cable
Kit311112-17410
• 800/1900 NMO antenna
• 10’ RG174 cable
Kit314203-17410
• 800/900/1900 NMO antenna
• 10’ RG174 cable
Marine Antenna
Kit311130-5810
• Marine Antenna
• 10’ RG58 cable
Glass Mount w/14’ RG58 cable
• 311102
• 311114 ( Mini Glass Mount)
NMO Antenna’s w/ RG58
Kit311104-5810
• 800/1900 NMO antenna
• 10’ RG58 cable
Kit 311112-5810
• 800/1900 NMO antenna
• 10’ RG58 cable
Kit 314203-5810
• 800/900/1900 NMO antenna
• 10’ RG58 cable
Outside Fixed Antennas
50 Ohm Outside Antenna Kits
Kit 314453-5825
• 50 Ohm Pole MountPanel
Antenna
• 25’ RG58 Cable
Kit 314411-5825
• 50 Ohm Wide Band
Directional
• 25’ RG58 Cable
Kit 301111-5850
• Yagi Directional Antenna
• 50’ RG58 Cable
Kit 311129-5840
• 800 MHz Yagi Directional
• 40’ RG58 Cable
Kit 311203-5820
• Omni-Directional antenna
• 20’ RG58 Cable
Kit 311124-5830
• 1900 MHz Yagi Antenna
• 30’ RG58 Cable
Kit 314411-40075
• 50 Ohm Wide Band
Directional
• 75’ LMR400 Cable
Kit 311203-40020
• Omni-Directional antenna
• 20’ LMR400 Cable
Kit 301111-400170
• Yagi Directional w/ N-Female
• 170’ LMR400
Kit 311124-400100
• 1900 MHz Yagi Directional
• 100’ LMR400 Cable
Kit 311129-400100
• 800 MHz Yagi Antenna
• 100’ LMR400 Cable
Kit 314453-40075
• 50 Ohm Pole MountPanel
Antenna
• 75’ LMR400 Cable
75 Ohm Outside Antenna Kits
Kit 301111-0675
• Yagi Directional Antenna
• 75’ RG6 Cable
• N-Male to F-Female adapter
Kit 311201-0620
• Omni Directional w/ F-Female
• 20’ RG6 Cable
Kit 311129-0660
• 800 MHz Yagi Directional
• 60’ RG6 Cable
• N-Male to F-Female adapter
Kit 311124-0650
• 1900 MHz Yagi Directional
• 50’ RG6 Cable
• N-Male to F-Female adapter
Kit 314473-0640
• 75 Ohm Pole MountPanel
Antenna
• 40’ RG6 Cable
Kit 314475-0630
• 75 Ohm Wide Band Directional
• 30’ RG6 Cable
Kit 311141-0620
• 75 Ohm Grey Brick Antenna
• 20’ RG6 Cable
Kit 301111-11140
• Yagi Directional Antenna
• 140’ RG11 Cable
• N-Male to F-Female adapter
Kit 311201-1120
• Omni Directional w/F-Female
• 20’ RG11 Cable
Kit 311129-11110
• 800 MHz Yagi Directional
• 110’ RG11 Cable
• N-Male to F-Female adapter
Kit 311124-1180
• 1900 MHz Yagi Directional
• 80’ RG11 Cable
• N-Male to F-Female adapter
Kit 314473-1175
• 75 Ohm Pole MountPanel
Antenna
• 75’ RG11 Cable
Kit 314475-1175
• 75 Ohm Wide Band Directional
• 75’ RG11 Cable
Kit 311141-1120
• 75 Ohm Grey Brick Antenna
• 20’ RG11 Cable
booster.us for information regarding the frequency

8Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153
ENGLISH
BEFORE USE, youMUST REGISTER THIS DEVICE with your wireless provider and have your
provider’s consent. Most wireless providers consent to the use of signal boosters. Some
providers may not consent to the use of this device on their network. If you are unsure,
contact your provider.
YouMUST operate this device with approved antennas and cables as specied by the
manufacturer. Antennas MUST be installed at least 20 cm (8 inches) from any person.
YouMUST cease operating this device immediately if requested by the FCC or a licensed
wireless service provider.
WARNING. E911 location information may not be provided or may be inaccurate for calls
served by using this device
.
This is a CONSUMER device.
This device complies with Part 15 of FCC rules. Operation is subject to two conditions: (1) This device may not cause
harmful inter ference, and (2) this device must accept any inter ference received, including interference that may cause
undesired operation. Changes or modifications not expressly approved by weBoost could void the authority to operate
this equipment.
Each Signal Booster is individually tested and factory set to ensure FCC compliance. The Signal Booster cannot
be adjusted without factory reprogramming or disabling the hardware. The Signal Booster will amplify, but not alter
incoming and outgoing signals in order to increase coverage of authorized frequency bands only. If the Signal Booster
is not in use for five minutes, it will reduce gain until a signal is detected. If a detected signal is too high in a frequency
band, or if the Signal Booster detects an oscillation, the Signal Booster will automatically turn the power off on that
band. For a detected oscillation the Signal Booster will automatically resume normal operation after a minimum of 1
minute. After 5 (five) such automatic restarts, any problematic bands are permanently shut off until the Signal Booster
has been manually restarted by momentarily removing power from the Signal Booster. Noise power, gain, and linearity
are maintained by the Signal Booster’s microprocessor.
Safety and Recommendations
WARNING: Connecting the Signal Booster directly to the cell phone with use of an adapter will damage the cell
phone.
WARNING: Use only the power supply provided in this package. Use of a non-weBoost product may damage your
equipment.
WARNING: To uphold compliance with network protection standards, all active wireless devices must maintain at
least 18” of separation distance from mobile inside antennas, 4’ of separation distance from desktop
antennas and 6’ of separation distance from Panel and Dome antennas.
WARNING: The Signal Booster unit is designed for use in an indoor, temperature-controlled environment (less than
150 degrees Fahrenheit). It is not intended for use in attics or similar locations subject to temperatures in
excess of that range.
RF SAFETY WARNING: Any antenna used with this device must be located at least 8 inches from all persons. The
FCC requires that a cell phone with cradle attached may only be used with the cradle mounted as
illustrated in this installation guide. A cell phone held near the ear must be without the cradle attached.

Need help? https://cellphonesignalbooster.us Customer Support
Mon.- Fri. Hours: 7 am to 6 pm MST
800-501-3153 9
ENGLISH ENGLISH
Signal Booster Specifications
Drive 3G-S
Model Number 470006
Connectors SMA-Female
Antenna Impedance 50 Ohms
Frequency 824-894 MHz/1850-1990 MHz
Passband Gain (nominal) 800 MHz
20.8
1900 MHz
18.6
20 dB Bandwidth (MHz)
800 MHz 1900 MHz
Typical
Maximum
42.1
43.6
82.2
83.4
Power output for single cell phone (dBm)
800 MHz 1900 MHz
Uplink
Downlink
22.9
-28.0
25.2
-29.1
Power output for multiple received channels
(Uplink) dBm
No. Tones
800 MHz 1900 MHz
225.4 21.4
321.9 17.9
419.4 15.4
517.4 13.4
615.8 11.8
Power output for multiple received channels
(Downlink) dBm
No. Tones
800 MHz 1900 MHz
2-26.6 -28.8
3-30.2 -32.3
4-32.7 -34.8
5-34.6 -36.7
6-36.2 -38.3
Noise Figure (typical downlink/uplink) 3 dB nominal
Isolation > 40 dB
Power Requirements 5.5 V 1A
The Manufacturer’s rated output power of this equipment is for single carrier operation. For situations when multiple carrier signals are present, the
rating would have to be reduced by 3.5 dB, especially where the output signal is re-radiated and can cause interference to adjacent band users. This
power reduction is to be by means of input power or gain reduction and not by an attenuator at the output of the device.

2-Year Warranty
weBoost Signal Boosters are warranted for two (2) years against defects in workmanship and/or materials. Warranty
cases may be resolved by returning the product directly to the reseller with a dated proof of purchase.
Signal Boosters may also be returned directly to the manufacturer at the consumer’s expense, with a dated proof of
purchase and a Returned Material Authorization (RMA) number supplied by weBoost. weBoost shall, at its option,
either repair or replace the product. weBoost will pay for delivery of the repaired or replaced product back to the original
consumer if located within the continental U.S.
This warranty does not apply to any Signal Boosters determined by weBoost to have been subjected to misuse, abuse,
neglect, or mishandling that alters or damages physical or electronic properties.
Failure to use a surge protected AC Power Strip with at least a 1000 Joule rating will void your warranty.
RMA numbers may be obtained by contacting Customer Support at 800-501-2153.
Disclaimer:The information provided by weBoost is believed to be complete and accurate. However, no responsibility
is assumed by weBoost for any business or personal losses arising from its use, or for any infringements of
patents or other rights of third parties that may result from its use.
Copyright © 2014 weBoost. All rights reserved.
weBoost products covered by U.S. patent(s) and pending application(s)