
13
Read these instructions and the safety
guidelines carefully before starting up the unit
and starting work.
)DLOXUHWRREVHUYHWKHVDIHW\UHJXODWLRQVUHVXOWVLQDULVNWR
life and limb.
Keep these instructions in a place that is accessible to all
users. Please adhere to the operating instructions of the
connected devices.
Safety information
For safety reasons, children and youths under the age
of 16, as well as persons who are not familiar with these
operating instructions, may not use the device. Children
shall not play with the appliance.
Cleaning and user maintenance shall not be made by
children without supervision.
Keep other persons well away from your workplace.
The work area is out of bounds for children and unauthorised
persons. Never allow other persons to touch the soldering
tool or cable.
WARNING Electrical shock
Connecting the control unit incorrectly poses a risk of
injury due to electric shock and can damage the device.
•
&DUHIXOO\UHDGWKHDWWDFKHGVDIHW\LQIRUPDWLRQWKHVDIHW\
LQIRUPDWLRQDFFRPSDQ\LQJWKHVHRSHUDWLQJLQVWUXFWLRQVDV
ZHOODVWKHRSHUDWLQJLQVWUXFWLRQVIRU\RXUFRQWUROXQLW
before putting the control unit into operation and observe
WKHVDIHW\SUHFDXWLRQVVSHFL¿HGWKHUHLQ
•
2QO\FRQQHFW:(//(5WRROV
If the device is faulty, active electrical conductors may
be bare or the PE conductor may not be functional.
•
5HSDLUVPXVWDOZD\VEHUHIHUUHGWRD:HOOHUWUDLQHG
specialist.
•
,IWKHHOHFWULFDOWRROµVSRZHUVXSSO\FRUGLVGDPDJHGLW
PXVWEHUHSODFHGZLWKDVSHFLDOO\SUHIDEULFDWHGSRZHU
VXSSO\FRUGDYDLODEOHWKURXJKWKHFXVWRPHUVHUYLFH
organisation.
Protect yourself against electric shocks. The handles on
soldering tools with an antistatic design are conductive.
•
Avoid touching earthed objects such as pipes, heaters,
cookers and refrigerators.
•
Do not use the soldering tool in a damp or wet environ-
ment.
•
1HYHUZRUNRQYROWDJHFDUU\LQJSDUWV
•
Caution! To provide continued protection against risk of
HOHFWULFVKRFNFRQQHFWWRSURSHUO\JURXQGHGRXWOHWVRQO\
WARNING Risk of burns
Risk of burns from the soldering tool while the control
unit is operating. Tools may still be hot long after they
have been switched off.
The soldering tip becomes very hot during soldering
work. There is a risk of burns from touching the tips.
After the soldering process, the soldering tool and the
workpiece holder are still hot.
•
$OZD\VSODFHWKHVROGHULQJWRROLQWKHVDIHW\UHVWZKLOHQRW
LQXVH0DNHVXUHWKHVDIHW\KROGHULVVWDEOH
•
'RQRWWRXFKWKHKRWVROGHULQJWLSVDQGNHHSWKHPDZD\
IURPLQÀDPPDEOHREMHFWV
•
2QO\UHSODFHVROGHUWLSVZKHQFROG
Risk of burning through liquid solder. Protect yourself
against solder splashes.
•
:HDUDSSURSULDWHSURWHFWLYHFORWKLQJWRSURWHFW\RXUVHOI
DJDLQVWEXUQV3URWHFW\RXUH\HVE\ZHDULQJH\H
protection.
•
When working with adhesives, special attention must be
SDLGWRWKHZDUQLQJLQIRUPDWLRQSURYLGHGE\WKHDGKHVLYH
manufacturer.
WARNING Fire hazard
Covering the soldering iron or the safety holder poses
D¿UHKD]DUG$OZD\VNHHSREMHFWVZHOODZD\IURPWKH
soldering iron and safety holder.
•
$OZD\VNHHSREMHFWVZHOODZD\IURPWKHVROGHULQJLURQDQG
VDIHW\KROGHU
•
.HHSDOOFRPEXVWLEOHREMHFWVOLTXLGVRUJDVHVZHOODZD\
from the hot soldering tool.
Store your soldering tool in a safe place. When not in
XVHXQLWVDQGWRROVVKRXOGEHVWRUHGLQDGU\KLJKRUORFNHG
area out of the reach of children. Make sure that unused
soldering tools are free of voltage and de-pressurised.
The power cable must only be plugged into the power
socket or adapter approved for this purpose. Check to
see if the mains voltage matches the ratings on the
nameplate. Make sure the machine is switched off before
plugging in.
Do not use the cable for purposes other than those for
which it is intended.1HYHUFDUU\WKHXQLWE\WKHFDEOH'R
not use the cable to pull the plug out of the socket. Protect
the cable against heat, oil and sharp edges..
Be alert. 3D\DWWHQWLRQWRZKDW\RXDUHGRLQJ%HVPDUW
ZKHQXVLQJWKHXQLW'RQRWXVHWKHVROGHULQJWRROLI\RXDUH
KDYLQJGLI¿FXOW\FRQFHQWUDWLQJ
Avoid abnormal posture. $UUDQJH\RXUZRUNVWDWLRQLQDQ
HUJRQRPLFDOO\FRUUHFWZD\$YRLGEDGSRVWXUHZKHQXVLQJWKH
unit, as this can lead to postural problems.
EN
ENGLISH
www. .com information@itm.com1.800.561.8187