Wells SW-10 User manual

SW-10, SW-10T COUNTERTOP WARMERS
SW-10, SW-10T COUNTERTOP WARMERS
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
• The tubular element, located under the
warming pan, allows for quick heating.
• Model SW-10T has a positive-off thermostat
that controls the element, allowing for
adjustable and more consistent temperatures.
A signal light indicates that the heating element
is energized.
• Model SW-10 has an inifinite switch that
regulates temperature and has a positive-off
position with signal light to indicate a
power-on condition.
• Warming pan is deep-drawn stainless steel
for maximum strength and durability.
• Warmers are designed for wet or
dry operation.
• Warming pan holds a standard 11-quart inset.
• Each unit is provided with 1" legs
• The SW-10 and SW-10T Warmers are
Underwriters Laboratories, Inc. LISTED
and meet NSF International standards.
• A one-year warranty against defects
covers parts and labor.
Wells Countertop Food Warmers are designed for efficiency and versatility. A tubular
element, positioned beneath the food well, is designed for wet or dry operation.
The warmers will accommodate a variety of inset sizes with appropriate adapter top.
SW-10
Specifications
Overall Dimensions: Inches MM
Width 12 5/8 321
Depth 12 5/8 321
Height (incl. 1" legs) 9 3/8 238
Temperature Range: Fahrenheit Celsius
SW-10 off/low to high
SW-10T 90° to 212° 32° to 100°
Weights: Lbs. KG
Installed 11 5
Shipping 14 6
Accessories / Options
Adapter Top, to hold one 4-quart
inset, 20822
Adapter Top, to hold one 7-quart
inset, 20175
Inset, 4-quart capacity with lid, 20774
Inset, 7-quart capacity with lid, 20587
Inset, 11-quart capacity with hinged
lid, 21057
Legs, set of four, plastic, 4”, 20314
Ladle, 6 oz., metal, 21764
WELLS

MODELS
SW-10, SW-10T
WA R M E R S
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
NOTE: Specifications are subject to change without notice. *Meets Canadian Standard Requirements.
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A.
USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone]
www.wells-mfg.com
© 2002 WELLS MANUFACTURING • PRINTED IN THE U.S.A.
02/02 • REV(D) • PART NO. 41926
CORD
SUPPLY
POWER
(25)
1
(165)
6 1/2
(260)
10 1/4
(213)
8 3/8
(321)
12 5/8
(321)
12 5/8
STD.4
R
E6070
R
LISTED
R
S W- 1 0 , S W- 1 0 T E L E C T R I C A L S P E C I F I C AT I O N S :
*SW-10 120 450 3.8 SINGLE NEMA 5-15P
SW-10T 120 825 6.9 SINGLE NEMA 5-15P
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD