Wells HMP-6ULD User manual

WELLS
R A I S I N G T H E S T A N D A R D
HMP-6ULD BUILT-IN
RECTANGULAR FOOD WARMER
HMP-6ULD BUILT-IN RECTANGULAR FOOD WARMER
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
• Threaded mounting studs provide quick and
easy top mount installation.
• The unique 6” x 20” half-size pan saves
counter space.
• The tubular element, located under the
warming pan, allows for quick heating.
• A positive-off thermostat controls the
element allowing for adjustable and more
consistent temperatures. A signal light
indicates that the heating element is energized.
• Control is recessed in a one-piece, drawn,
front-mounted panel.
• Warming pan is deep-drawn, stainless steel
for maximum strength and durability.
• Designed for wet or dry operation.
• The HMP-6ULD Warmer is Underwriters
Laboratories, Inc. LISTED and meets NSF
International standards.
• A one-year warranty against defects covers
parts and labor.
Accessories / Options
Drain Screen, 21709
Drain Valve Extension Kit, extension
from drain to counter front with remote
handle, 20385
Wells HMP-6ULD Built-in Half-Size Warmer is designed for top mount installation and
accomodates a 6" x 20" pan. This dependable and practical unit will allow a variety of products
to be served in a standard size space.
Export
The following models are available for
export and meet the standards for CE:
• HMP-6EUT, 220-240V, 1Ø, 575 watts
• HMP-6EUTD, 220-240V, 1Ø, 575 watts
HMP-6ULD
Specifications
Overall Dimensions: Inches MM
Width 6 3/8 162
Depth 20 3/4 527
Temperature Settings: OFF/LO to HI
Weights: Lbs. KG
Installed 13 6
Shipping 14 6

WELLS
STD.4
R
E6070
R
LISTED
ONLY
MODELS
EXPORT
(525)
20 5/8
(192)
7 9/16
(162)
6 3/8
(105)
4 1/8
(505)
19 7/8
(143)
5 5/8
(159)
6 1/4
(149)
5 7/8
(165)
6 1/2
CONDUIT
MODEL ONLY
1/2 NPT HMP-6ULD
H M P - 6 U L D E L E C T R I C A L S P E C I F I C AT I O N S :
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A. • USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone] • www.wellsbloomfield.com
© 2001 WELLS MANUFACTURING • PRINTED IN THE U.S.A. • 2/01 • REV(C) • PART NO. 45618
MODEL
H M P - 6 U L D
B U I LT - I N R E C TA N G U L A R
WA R M E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
MINIMUM CLEARANCE REQUIRED
FROM UNIT TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT
1 2 8 1/2 4 1/8
(25) (51) (216) (105)
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes. The installation of recognized component units requires additional
evaluations to Underwriters Laboratories, Inc. standards.
THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY.
HMP-6ULD 120 750 6.3 SINGLE NONE
HMP-6EUT 220-240 575 2.4 SINGLE NONE
HMP-6EUTD 220-240 575 2.4 SINGLE NONE
Denotes export (EU) products.