Wells BMW-206ULRT User manual

BMW-206ULRT BUILT-IN FOOD WARMER
BMW-206ULRT BUILT-IN FOOD WARMER
I T E M N O .
WE L L S M A N U F A C T U R I N G
Features
• Warming pan is deep drawn, stainless steel
for maximum strength and durability.
• The tubular elements, located under the
warming pans, allow for quick heating.
• Control is recessed in a one piece, die stamped
stainless steel, remote panel to help prevent
accidental
temperature changes.
• The tubular element, located under the
warming pan, allows for quick heating.
• The positive-off thermostat (T) controls the
element allowing for adjustable and more
consistent temperatures. A signal light indicates
that the heating element is energized.
• Fully insulated for greater efficiency.
•Warmers are designed for wet or dry operation.
•Models available with optional drain (D).
•The BMW-206ULRT warmer is Underwriter’s
Laboratories, Inc. LISTED and meets NSF
International and Canadian standards.
• A one-year warranty against defects covers
parts and labor.
Specifications
Overall Dimensions: Inches MM
Width 13 7/8 352
Depth 21 15/16 557
Temperature Settings: OFF/LO to HI
Weights: Lbs. KG
Installed 18 8
Shipping 22 10
WELLS
Accessories / Options
Adapter Top, to convert warmer to hold two
7-quart insets, 21502
Adapter Top, to convert warmer to hold two
4-quart and two 2 1/2-quart insets, 21503
Adapter Top, to convert warmer to hold one
7-quart and one 11-quart inset, 22576
Adapter Top, to convert warmer to hold three
4-quart insets, 21616
Adapter Top, to convert warmer to hold four
2 1/2-quart insets, 21623
Adapter Top, to convert warmer to hold one
4-quart and one 7-quart inset, 21618
Inset, 2 1/2-quart capacity with lid, 20773
Inset, 4-quart capacity with lid, 20774
Inset, 7-quart capacity with lid, 20587
Inset, 11-quart capacity with lid, 20908
Optional Drain (D) is available
Drain Valve Extension Kit, extension from drain
to counter front with remote handle, for use
with “D” models only, 20385
BMW-206ULRT
Wells BMW-206ULRT built-in “round corner” warmer is designed for quick and easy bottom mount
installation, providing an unobstructed, clean countertop. These dependable units have “round corners” and
are made with heavy-duty stainless steel. They are fully insulated and will accommodate a standard 12” x 20”
steam table pan up to six inches deep.

(512)
20 5/32
(557)
21 15/16
(309)
12 5/32
(352)
13 7/8
(211)
8 5/16
(159)
6 1/4
(149)
5 7/8
(105)
4 1/8
(143)
5 5/8
BMW-206ULRTD ONLY
1/2 IN DRAIN NPT
MODEL
B M W - 2 0 6 U R LT
B U I LT - I N W A R M E R
DIMENSIONS: INCH
(MM)
WE L L S M A N U F A C T U R I N G
NOTE: Specifications are subject to change without notice. See installation instructions prior to installing the unit.
This document is not for installation purposes.
THIS UNIT IS DESIGNED TO BE INSTALLED IN METAL COUNTERS ONLY
B M W - 2 0 6 U L R T E L E C T R I C A L S P E C I F I C AT I O N S :
BMW-206ULRT 120 1200 10.0 SINGLE NONE
BMW-206ULRT 208 1240 6.0 SINGLE NONE
BMW-206ULRT 240 1650 6.9 SINGLE NONE
MODELS VOLTS WATTS AMPS PHASE POWER SUPPLY CORD
MINIMUM CLEARANCE FROM UNIT
TO THE NEAREST SURFACE
BACK SIDE BOTTOM FRONT
1 1 6 3/4 4 1/8
(25) (25) (171) (105)
WELLS MANUFACTURING COMPANY
2 ERIK CIRCLE, PO BOX 280, VERDI, NV 89439 U.S.A.
USA PHONE: [phone] • FAX: [phone]
FOR ORDERS ONLY: [phone] • FAX: [phone]
www.wellsbloomfield.com
© 2002 WELLS MANUFACTURING • PRINTED IN THE U.S.A.
03/02 • REV(-) • PART NO. 303438
LISTED
R
C
E6070 E6070
R
LISTED
R
STD.4
All models with a 'D' suffix have the same electrical specifications as the standard versions.