WELLTECH SIP-Phone User manual

S
SI IP P- -P Ph ho on ne e
U
Us se er r M Ma an nu ua al l

SIP SIP-Phone Administration Guide
1
Chapter 1 Overview of the SIP-Phone.................................................................................4
1. Hardware Overview..................................................................................................5
1.Front View and Keypad function.........................................................................5
2.Back View...........................................................................................................9
3.Specification of connector...................................................................................9
2. Software Features and Specification ......................................................................11
3. Physical specification & Environment.....................................................................13
Chapter 2 Configuring the SIP-Phone through LCD Phone menus...................................14
1. Initialize SIP-Phone ................................................................................................14
2. LCD Menu Configuration........................................................................................16
Chapter 3 Configuring the SIP-Phone through Web Pages...............................................22
Step 1. Browse the IPAddress predefined via Keypad...............................................23
Step 2. Input the login name and password................................................................24
Step 3. Enter the web interface main screen..............................................................25
Step 4. Start to configure ............................................................................................25
1. Network Interface ............................................................................................26
2. SIP Information................................................................................................29
3. System Configuration......................................................................................31
4. PPPoE Configure ............................................................................................32
5. Voice Setting....................................................................................................33
6. Phone Book.....................................................................................................34
7. DDNS Configuration........................................................................................35
8. DSCP Configuration........................................................................................36
9. Password.........................................................................................................38
10. Rom Configuration.........................................................................................39
11. Flash Clean....................................................................................................40
12. Reboot System..............................................................................................41
Chapter 4 Configuring the SIP-Phone through Telnet command lines...............................42
1. [help] command......................................................................................................42
2. [quit] command.......................................................................................................43
3. [debug] command...................................................................................................43
4. [reboot] command...................................................................................................43
5. [pbook] command...................................................................................................43
6. [commit] command .................................................................................................44
7. [ping] command......................................................................................................44
8. [time] command......................................................................................................45
9. [ifaddr] command....................................................................................................45
10. [pppoe] command.................................................................................................46

SIP SIP-Phone Administration Guide
2
11. [flash] command....................................................................................................47
12. [sysconf] command...............................................................................................47
13. [sip] command ......................................................................................................48
14. [security] command...............................................................................................49
15. [voice] command...................................................................................................50
16. [tos] command......................................................................................................51
17. [ddns] command...................................................................................................53
18. [vlan] command....................................................................................................54
19. [bureau] command................................................................................................55
20. [rom] command.....................................................................................................56
21. [passwd] command...............................................................................................57
Chapter 5 Upgrading Software on the SIP-Phone.............................................................58
1.From LCD Phone Menu...........................................................................................58
2. Web Management ..................................................................................................59
3. Remote Control: Telnet...........................................................................................60

SIP SIP-Phone Administration Guide
3
Revision History
Version Date Author Software Version Note
LP_SIP_100 2004/03 Sabrina For test version
only. First released for software test version.
LP_SIP_100a 2004/04/07 Sabrina lp101/201sip.100 For first formal released
software.
LP_SIP_101 2004/12/1 Sabrina lp201sip.101 Modify:
1. Forward function
2. Call list function
3. LCD menu firmware
upgrading section.
4. Add DDNS function
5. Add VLAN function

SIP SIP-Phone Administration Guide
4
Chapter 1 Overview of the SIP-Phone
SIP-Phone is a full-featured IP-based telephone set via Ethernet base communication. Over
the office LAN connection, it provides IP-PBX solution such as station-to-station call, IP call
and local PSTN/PBX Extension call via PSTN Gateway.
SIP-Phone provides two 10/100BaseT switch/hub RJ-45 ports allow connecting to office
LAN and PC simultaneously. It is compatible with ADSL or Cable Modem provided by ITSP,
ISP or Carrier Company to provide VoIP services to residential and SOHO application.
SIP-Phone is also an integrated Analog Phone provides IP call or PSTN call selection.
When external power is down, it can be a Plain Old Telephone set (POTs).
It provides internal high-quality speakerphone, programmable keys and feature buttons.
SIP-Phone also embedded with a dot matrix of two lines 24 characters LCD, which can
display date and time, calling party name, calling party number, and digits dialed and etc.

SIP SIP-Phone Administration Guide
5
1. Hardware Overview
1.Front View and Keypad function
♦ LCD: 2 lines, 24 character Dot Matrix display.
♦ C: Jump out current LCD menu.
♦ : Move to previous selection or clear previous data.
♦ : Move to right or next selection.
♦ OK: Press OK to confirm the modification.
♦ Direct Line (DL) Button 1 – 10: User press DL button after off-hook to do speed dial
according to phone book data from 1-10 (please refer to LCD configuration-3.Phone
Book; Advanced Configurations via Telnet- 10.[pbook] command, or Web
Configuration-Phone Book chapter.

SIP SIP-Phone Administration Guide
6
♦ Number 1 –10, * and #: The function is the same as the general phone set.
Corresponding list of keypad and symbol:
(1) Character mode:
1 “1”
2 “A” ; “ B” ; “C” ; “2”
3 “D” ; “E” ; “F” ; “3”
4 “G” ; “H” ; “I” ; “4”
5 “J” ; “K” ; “L” ; “5”
6 “M” ; “N” ; “O” ; “6”
7 “P” ; “Q” ; “R” ; “S” ; “7”
8 “T” ; “U” ; “V” ; “8”
9 “W” ; “X” ; “Y” ; “Z” ; “9”
* “.” ; “@” ; “_” ; ”-“ ; “,” ; “!” ; “?” ; “*” ; “’” ; “+” ; “$” ; “*”
0 “Space” ; “0”
# “#”
(2) Digit mode:
1 “1”
2 “2”
3 “3”
4 “4”
5 “5”
6 “6”
7 “7”
8 “8”
9 “9”
* “.”
0 “0”
#
♦ MUTE: Mute the voice of MIC and let others can’t hear from user in communication.
♦ PSTN: Press PSTN to switch SIP-Phone as PSTN or IP Phone Mode. In PSTN mode,
“PSTN” characters will be displayed on LCD left bottom side, then users can dial out as
if standard telephone set in PSTN; in IP Phone mode, “PROXY ” characters will be
displayed on LCD left bottom side.

SIP SIP-Phone Administration Guide
7
Note:
1. When SIP-Phone is in PSTN mode, only PSTN and SPEAKER function key can work.
2. On LCD will display ”…Incoming Call... ” to inform user when SIP-Phone has both IP and
PSTN side incoming calls.
3. If in communication with IP side, user can press HOLD to hold IP side, then press PSTN
to pick up PSTN side, after that can press HOLD again to retrieve IP side.
4. If in communication with PSTN side, user must hang up PSTN side before pick up IP
side.
♦ HOLD: To hold a call, after press HOLD button, both sides will hear hold tone.
♦ SPEED:
1. Press SPEED and number (Phone book index) after off-hook can do speed dial
according to phone book data (please refer to 3.LCD configuration-6. Phone Book
or Advanced Configurations via 4.Telnet- 10. [pbook] command).
2. Switch input mode between character mode or digit mode, e.g., when user wants to
input phone number can press SPEED to switch input mode as digit mode; when
user wants to input name can also press SPEED to switch input mode as character
mode.
♦ FORWARD: Forward an incoming call to another IP device. (Please refer to LCD
configuration-Forward Type)
♦ MESSAGE and its indicated LED light: When having missed incoming calls, the
MESSAGE LED will be flashing. User can check the information of missed calls by
pressing the MESSAGE button.
♦ TRANSFER:
1. Transfer a call to the third site. WhenA and B are in communication, A wants to
transfer this call to C, A can press TRANSFER button, now B will hear hold tone,
and A will hear dial tone, then A can press phone number of C, after C picks up, A
can talk with C, after A hangs up, B and C can be connected.
Note:
1. A cannot press phone number of C before hearing dial tone.
2. If Apress TRANSFER and number, press TRANSFER again can cancel
transferring and retrieve call with B.
3. If Apress TRANSFER and number of C, C is ringing, press TRANSFER
again C will return to standby mode and A can retrieve call with B.
4. Before C picks up, A cannot hangs up the phone.

SIP SIP-Phone Administration Guide
8
2. Change characters to be capital or lowercase: when pressing TRANSFER before
press letters can switch input type of letters.
♦ REDIAL: Redial the last outgoing call.
♦ + And -: Adjust the voice volume heard of communication.
♦ SPEAKER: Hand free mode. User can talk without picking up handset.
Note:
1. All function keys mentioned above (except dialing keypad) are effective only in IP
Phone mode.
2. When LAN Phone fail to register to Proxy server under Proxy mode, when user
wants to dial out, LAN Phone will play busy tone, and on LCD will display
“Register Failed.”

SIP SIP-Phone Administration Guide
9
2.Back View
♦ DC 9V: DC 9V power input outlet
♦ LAN: RJ-45 connector, connected directly to the Hub through the straight CAT-5
cable.
♦ PC: RJ-45 connector, connected directly to the PC through the straight CAT-5 cable
♦ Line: RJ-11 connector, connected directly to the PSTN analog line.
Note:
There are two LED indicated lights: LINK/ACT and 10/100 for LAN port and PC port.
When network status is regular, LED of LINK/ACT will light on; when SIP-Phone is
transmitting or receiving data, LED will be flashing; when transmit rate is in 10 mbps or
100mbps, LED of 10/100 will light off or light on.
3.Specification of connector
1、Ethernet Port：
Ethernet port is for connecting SIP-Phone to network, transmit rate supports 10/100
Base-T.
Ethernetconnector（LAN）