Weslo EasyFit User manual

USERʼS MANUAL
Visit our website
www.iconsupport.eu
Model No. : WLIVEL87912.0
Serial No ___________
CAUTION
Read all precautions and instruc-
tions in this manual before using
this equipment. Keep this manual
for future reference.
QUESTIONS ?
If you have questions, or if there are
missing parts, please contact us:
UK
Call: 08457 089 009
From Ireland: 053 92 36102
Website: www.iconsupport.eu
E-mail: [email protected]
Write:
ICON Health & Fitness, Ltd.
c/o HI Group PLC
Express Way
Whitwood, West Yorkshire
WF10 5QJ
UK
Write the serial number in the
space above for reference.
Serial number decal
EasyFit.
by WESLO

2
TABLE OF CONTENTS
IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
ASSEMBLY. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
HOW TO PLUG THE POWERADAPTER. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
HOW TO OPERATE THE ELLIPTICAL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
FEATURES OF THE CONSOLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
EXERCISE GUIDELINES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
EXPLODED DRAWINGS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PART LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
MAINTENANCEAND TROUBLESHOOTING. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
ORDERING REPLACEMENT PARTS.. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Last Page

3
IMPORTANT PRECAUTIONS
WARNING : To reduce the risk of serious injury, read all important precautions and
instructions in this manual and all warnings on your elliptical before using your elliptical. ICON
assumes no responsibility for personal injury or property damage sustained by or through the
use of this product.
1. Before beginning any exercise program, con-
sult your physician. This is especially important
for persons over age 35 or persons with pre-
existing health problems.
2. Use the elliptical only as described in this
manual.
3. It is the responsibility of the owner to ensure
that all users of the elliptical are adequately
informed of all precautions.
4. The elliptical is intended for home use only.
Do not use the elliptical in a commercial, rental,
or institutional setting.
5. Keep the elliptical indoors, away from mois-
ture and dust. Place the elliptical on a level sur-
face, with a mat beneath it to protect the oor
or carpet. Make sure that there is at least 3 ft.
(0.9 m) of clearance in the front and rear of the
elliptical and 2 ft. (0.6 m) on each side.
6. Inspect and properly tighten all parts regu-
larly. Replace any worn parts immediately.
7. Keep children under age 12 and pets away
from the elliptical at all times.
8.The elliptical should not be used by persons
weighing more than 250 lbs. (115 kg).
9. Wear appropriate clothes while exercising;
do not wear loose clothes that could become
caught on the elliptical. Always wear athletic
shoes for foot protection while exercising.
10. Hold the handlebars or the upper body arms
when mounting, dismounting, or using the el-
liptical.
11. The pulse sensor is not a medical device.
Various factors may affect the accuracy of heart
rate readings. The pulse sensor is intended
only as an exercise aid in determining heart
rate trends in general.
12. The elliptical does not have a freewheel; the
pedals will continue to move until the ywheel
stops. Reduce your pedaling speed in a con-
trolled way.
13. Keep your back straight while using the el-
liptical; do not arch your back.
14. Over exercising may result in serious injury
or death. If you feel faint or if you experience
pain while exercising, stop immediately and
cool down.

4
BEFORE YOU BEGIN
Thank you for purchasing the Weslo® Body 580.
The elliptical provides an array of features de-
signed to make your workouts at home more ef-
fective and enjoyable.
For your benet, read this manual carefully be-
fore you use the elliptical. If you have questions
after reading this manual, please see the front
cover of this manual. To help us assist you, note
the product model
number and serial number before contacting us.
The model number is WLIVEL87912.0 and the lo-
cation of the serial number decal are shown on the
front cover of this manual.
Before reading further, please familiarize yourself
with the parts that are labeled in the drawing be-
low.
115 Kg
115 Kg
115 Kg
ENGLISH
115 Kg
WARNING DECAL PLACEMENT
This drawing shows the location(s) of
the warning decal(s). If a decal is miss-
ing or illegible, call the telephone num-
ber on the front cover of this manual
and request a free replacement decal.
Apply the decal in the location shown.
Note: The decal(s) may not be shown
at actual size.

5
ASSEMBLY
Assembly requires two persons. Place all parts of the exercise cycle in a cleared area and remove
the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included tool(s), assembly requires an adjustable wrench and a Phillips
screwdriver .
Use the part drawings below to identify the small parts used in assembly. The number in parenthe-
ses below each drawing refers to the key number of the part, from the PART LIST near the end of
this manual. The number following the parentheses is the quantity needed for assembly. Note: Some
small parts may have been preassembled. If a part is not in the hardware kit, check to see if it has
been preassembled.

6
Step 1:
1. Fix the Front bottom tube (3) to the Main frame
(1) with Bolts (20), Arc washers (21), Nuts (22).
2. Fix the Rear bottom tube (2) to the main frame
(1) with Bolts (55) and Arc washers(54).
Step 2:
1. Put the Protective guard (14) onto the Handle-
bar post (4); connect the Sensor wire (26) power
wire(66) motor wire(64) with the Connection wire
(25).power connection wire(67) & the motor con-
nection wire(65)
2. Fix the Handlebar post (4) to the main frame (1)
with screws (23), Arc washers (21), and then put
the Protective guard (14) on.

7
Step 3:
1. Attach the left and right Swing tube
(6L/R) to the Handlebar post (4) with Bolt
(28), spring washer (27) and Flat washer
(63), but don’t tighten then rst.
2. Attach the left Pedal support (5L) to the
Crank (60) with Bolt (51), spring washer
(52), D-shape washer (30) and Wave
washer (33), then tighten the bolts (51) &
(28).
3. Attach the left Pedal support (5R) to
the left Swing tube (6R) with bolt(39), at
washer(53)(40)& nylon nut(41), and then
tighten the bolts (51) & (28).&(39)& nylon
nut(41).
4. Tighten the right Pedal support (5R) and
the right Swing tube (6R) to the Handlebar
post (4) and the Crank (60) with the same
way.
Step 4:
Fix the Pedals (17L/R) to the Pedal sup-
ports (5L/R) with Bolts (45), Flat washer
(46) and Nylon nuts (61).

8
Step 5:
1. Fix the Protective guards
(18L/R) to the Pedal supports
(5L/R) with Screws (36).
2. Fix the Protective guards
(19a/b) to the Pedal tube joints
(43L/R) with Screws (44).
Step 6:
1. Fix the Handlebars (7L/R) to the Swing tubes (6L/R) respectively with Bolts (34) and Nylon nuts (35).
2. First set the Post cover (58a) on the Connecting piece of Handlebar post (4). Then x the xed handlebar
(8) to the Handlebar post (4) with Screw (24) and spring washer (27). Last, pass the Pulse wire (47) through
into the hole in the back of the Handlebar post (4) and pull out of the hole of the Computer bracket.
3. Fix the left Protective guards
(13L-1, 13L-2) to the junction
of Swing tube (6L) and Handler
bar (7L) with Screw (36 ) and
Screw(57), and then x the right
Protective guards (13R-1, 13R-2)
to the junction of Swing tube (6R)
and Handler bar (7R) with Screw
(36 ) and Screw(57).

9
Step 7:
1. Connect the Connection wire (25) and
Pulse wire (47) to the wires of Computer
(10), and then x the Computer (10) to the
computer bracket of the Handlebar post (4)
with Screws (49) and Flat washers (48).
2. Fix the Post cover (58b) to the Post cover
(58a) with Screw (36) and Screw (57).
Now your machine is ready for use.

10
HOW TO PLUG THE POWER ADAPTER
IMPORTANT: If the exercise bike has been exposed to cold temperatures, allow it to warm to room
temperature before plugging in the power adapter. If you do not do this, you may damage the console
displays or other electronic components.
Plug the power adapter into the receptacle on the frame of the
exercise bike.
Next, plug the power adapter into the plug adapter.
Then, plug the plug adapter into an appropriate outlet that
is properly installed in accordance with all local codes and
ordinances.
IMPORTANT: The adapter is only needed for the UK market. It
is useless for the other markets.
Power
adapter