Westmed Comfort Soft Plus User manual

Patents Pending
Product of Mexico
Assembled in Mexico
LABEL PN 75512, Rev. 01
0569
UNITS - 1
Rx Only
SUGGESTEDPROCEDURE:
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
Comfort Soft Plus
Cannula High Flow
CAUTION:
Use of sterilization or cleaning solutions
may leave this device nonfunctional.
1. These products are intended for use in delivering oxygen therapy.
2. All products are to be used in accordance with the applicable prescription.
3. Remove the product from the package.
4. Attach the device to the oxygen source and make appropriate connection.
5. Refer to instructions on back side for connection to circuit.
6. Ensure that all connections are secure, and then start the gas flow.
7. Confirm appropriate function prior to use.
8. Check for gas flow throughout the device.
9. Discard after single patient use.
LENGTH - 2”
Patents Pending
Product of Mexico
Assembled in Mexico
LABEL PN 75508, Rev. 01
0569
UNITS - 1
Rx Only
SUGGESTEDPROCEDURE:
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
Comfort Soft Plus
Cannula High Flow
CAUTION:
Use of sterilization or cleaning solutions
mayleave this device nonfunctional.
1. These products are intended for use in delivering oxygen therapy.
2. All products are to be used in accordance with the applicable prescription.
3. Remove the product from the package.
4. Attach the device to the oxygen source and make appropriate connection.
5. Refer to instructions on back side for connection to circuit.
6. Ensure that all connections are secure, and then start the gas flow.
7. Confirm appropriate function prior to use.
8. Check for gas flow throughout the device.
9. Discard after single patient use.
LENGTH - 2”
Patents Pending
Product of Mexico
Assembled in Mexico
LABEL PN 75512, Rev. 01
0569
UNITS - 1
Rx Only
SUGGESTEDPROCEDURE:
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
Comfort Soft Plus
Cannula High Flow
CAUTION:
Use of sterilization or cleaning solutions
mayleave this device nonfunctional.
1. These products are intended for use in delivering oxygen therapy.
2. All products are to be used in accordance with the applicable prescription.
3. Remove the product from the package.
4. Attach the device to the oxygen source and make appropriate connection.
5. Refer to instructions on back side for connection to circuit.
6. Ensure that all connections are secure, and then start the gas flow.
7. Confirm appropriate function prior to use.
8. Check for gas flow throughout the device.
9. Discard after single patient use.
LENGTH - 2”
Patents Pending
Product of Mexico
Assembled in Mexico
LABEL PN 75512, Rev. 01
0569
UNITS - 1
Rx Only
SUGGESTEDPROCEDURE:
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
Comfort Soft Plus
Cannula High Flow
CAUTION:
Use of sterilization or cleaning solutions
mayleave this device nonfunctional.
1. These products are intended for use in delivering oxygen therapy.
2. All products are to be used in accordance with the applicable prescription.
3. Remove the product from the package.
4. Attach the device to the oxygen source and make appropriate connection.
5. Refer to instructions on back side for connection to circuit.
6. Ensure that all connections are secure, and then start the gas flow.
7. Confirm appropriate function prior to use.
8. Check for gas flow throughout the device.
9. Discard after single patient use.
LENGTH - 2”
Patents Pending
Product of Mexico
Assembled in Mexico
LABEL PN 75512, Rev. 01
0569
UNITS - 1
Rx Only
SUGGESTEDPROCEDURE:
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
Comfort Soft Plus
Cannula High Flow
CAUTION:
Use of sterilization or cleaning solutions
mayleave this device nonfunctional.
1. These products are intended for use in delivering oxygen therapy.
2. All products are to be used in accordance with the applicable prescription.
3. Remove the product from the package.
4. Attach the device to the oxygen source and make appropriate connection.
5. Refer to instructions on back side for connection to circuit.
6. Ensure that all connections are secure, and then start the gas flow.
7. Confirm appropriate function prior to use.
8. Check for gas flow throughout the device.
9. Discard after single patient use.
LENGTH - 2”
Patents Pending
Product of Mexico
Assembled in Mexico
LABEL PN 75512, Rev. 01
0569
UNITS - 1
Rx Only
SUGGESTEDPROCEDURE:
Westmed
5580 S. Nogales Highway
Tucson, Arizona 85706 USA
Phone: [phone]
Fax: [phone]
www.westmedinc.com
MT Promedt Consulting GmbH
Altenhofstr. 80
66386 St. Ingbert, Germany
Comfort Soft Plus
Cannula High Flow
CAUTION:
Use of sterilization or cleaning solutions
mayleave this device nonfunctional.
1. These products are intended for use in delivering oxygen therapy.
2. All products are to be used in accordance with the applicable prescription.
3. Remove the product from the package.
4. Attach the device to the oxygen source and make appropriate connection.
5. Refer to instructions on back side for connection to circuit.
6. Ensure that all connections are secure, and then start the gas flow.
7. Confirm appropriate function prior to use.
8. Check for gas flow throughout the device.
9. Discard after single patient use.
LENGTH - 2”
LABEL PN 75512, Rev. 01
Pediatric Nasal Cannula for use with flows up to 8 LPM.
Green Band on Cannula
Pediatric Nasal Cannula for use with flows up to 8 LPM.
Green Band on Cannula
Pediatric Nasal Cannula for use with flows up to 8 LPM.
Green Band on Cannula
Pediatric Nasal Cannula for use with flows up to 8 LPM.
Green Band on Cannula
Pediatric Nasal Cannula for use with flows up to 8 LPM.
Green Band on Cannula
Pediatric Nasal Cannula for use with flows up to 8 LPM.
Green Band on Cannula

SUGGESTED USE:
1
2
From humidifier
Circuit Tubing
Attach to
Westmed High
Flow Cannula
15mm Adapter
1
2
From humidifier
Attach to
Westmed High
Flow Cannula
22mm OD Adapter
Circuit Tubing
1. Attach appropriate Westmed Cannula Adapter.
2. Connect small end of Adapter to High Flow Cannula.
3. Connect large end of Adapter to Circuit.
4. Prior to patient connection: Check that all connections are secure and
confirm there is not leakage or occlusion of the system.
WARNING: Do not soak, rinse, wash, gas, or steam sterilize this product.
SUGGESTED USE:
1
2
From humidifier
Circuit Tubing
Attach to
Westmed High
Flow Cannula
15mm Adapter
1
2
From humidifier
Attach to
Westmed High
Flow Cannula
22mm OD Adapter
Circuit Tubing
1. Attach appropriate Westmed Cannula Adapter.
2. Connect small end of Adapter to High Flow Cannula.
3. Connect large end of Adapter to Circuit.
4. Prior to patient connection: Check that all connections are secure and
confirm there is not leakage or occlusion of the system.
WARNING: Do not soak, rinse, wash, gas, or steam sterilize this product.
SUGGESTED USE:
1
2
From humidifier
Circuit Tubing
Attach to
Westmed High
Flow Cannula
15mm Adapter
1
2
From humidifier
Attach to
Westmed High
Flow Cannula
22mm OD Adapter
Circuit Tubing
1. Attach appropriate Westmed Cannula Adapter.
2. Connect small end of Adapter to High Flow Cannula.
3. Connect large end of Adapter to Circuit.
4. Prior to patient connection: Check that all connections are secure and
confirm there is not leakage or occlusion of the system.
WARNING: Do not soak, rinse, wash, gas, or steam sterilize this product.
SUGGESTED USE:
1
2
From humidifier
Circuit Tubing
Attach to
Westmed High
Flow Cannula
15mm Adapter
1
2
From humidifier
Attach to
Westmed High
Flow Cannula
22mm OD Adapter
Circuit Tubing
1. Attach appropriate Westmed Cannula Adapter.
2. Connect small end of Adapter to High Flow Cannula.
3. Connect large end of Adapter to Circuit.
4. Prior to patient connection: Check that all connections are secure and
confirm there is not leakage or occlusion of the system.
WARNING: Do not soak, rinse, wash, gas, or steam sterilize this product.
SUGGESTED USE:
1
2
From humidifier
Circuit Tubing
Attach to
Westmed High
Flow Cannula
15mm Adapter
1
2
From humidifier
Attach to
Westmed High
Flow Cannula
22mm OD Adapter
Circuit Tubing
1. Attach appropriate Westmed Cannula Adapter.
2. Connect small end of Adapter to High Flow Cannula.
3. Connect large end of Adapter to Circuit.
4. Prior to patient connection: Check that all connections are secure and
confirm there is not leakage or occlusion of the system.
WARNING: Do not soak, rinse, wash, gas, or steam sterilize this product.
SUGGESTED USE:
1
2
From humidifier
Circuit Tubing
Attach to
Westmed High
Flow Cannula
15mm Adapter
1
2
From humidifier
Attach to
Westmed High
Flow Cannula
22mm OD Adapter
Circuit Tubing
1. Attach appropriate Westmed Cannula Adapter.
2. Connect small end of Adapter to High Flow Cannula.
3. Connect large end of Adapter to Circuit.
4. Prior to patient connection: Check that all connections are secure and
confirm there is not leakage or occlusion of the system.
WARNING: Do not soak, rinse, wash, gas, or steam sterilize this product.