Whittier Wood Products John Greenleaf Create A Chair 418KFDC User manual

P.O. Box 2827
Eugene, OR 97402 USA
Service Policy: We will replace any
parts which are defective, missing or
damaged during assembly. Please contact
Whittier Wood Products customer service
department directly (by phone, fax, mail or
email) for replacement parts.
Hours: Our friendly customer service staff
can be reached Monday-Friday 7:00 a.m. to
5:00 p.m. (Pacific Time). A message can be
left 24 hours a day, 7 days a week.
To Order: Provide the complete furniture
model number, part letter, production code,
quantity needed, reason for replacement
and your full name and address along with
a telephone number in case we need to
contact you.
Parts ship from our Eugene, Oregon factory
within 1 or 2 business days from the time
we receive the request. Please allow 5-10
business days for delivery.
Outside U.S. or Canada: 541-687-0213
Fax: [phone] • Email: [e-mail]
Mail: P.O. Box 2827 • Eugene, Oregon 97402, U.S.A.
Production Code:
Congratulations!
This fine piece of furniture will make a handsome
addition to your home. For the best results, start by
reading both the Assembly Instructions and
Gluing Hints before you begin your project.
Read both the Assembly Instructions and Gluing Hints
completely before beginning. (Gluing Hints enclosed
with chair instructions.)
Store the parts: 1) in their box; 2) in a dry place; 3) in
temperatures ranging from 40° to 90°. (Not on a cold,
possibly damp, cement floor.)
Inspect your furniture periodically for any loose glue
joints or screws, or any other problem which may
be affecting the stability of your furniture. Tighten or
repair as needed.
Rev. 10/05
418KFDC
DISTRESSED ANTIQUE
CHERRY FINISH
Rustic Wood Seat
418KFDC Seat
intended for use with a
Distressed Antique Cherry
Finish Rustic chair frame.
Natural characteristics such as
knots provide a natural feel.
For normal household use only.
recommended for commercial use.
Do not climb or stand on this piece of
furniture.

HARDWARE
#8 x 2¾" Black Screw — Qty. 8 (per seat)
Page 2 — 418KFDC
418KFDC Rustic Wood Seat
INSTRUCTIONS FOR ATTACHING SEAT
TOOLS REQUIRED:
Phillips Head Screwdriver and Wood Glue
Lay the Seat face down on a clean protected surface, with the back of the seat hanging
over the edge.
Stand the leg assembly upright and lay a bead of glue along the entire length of each side
apron and a 3" to 4" long bead centered on the front and back aprons.
Turn the leg assembly upside down and center on the seat, making sure that the seat is
in contact with the back legs. Insert Black Screws through the holes in the aprons into the
bottom of the seat.