Quick Start Guide
Tera Card TCS1-1 and TCS2-0 SATA hosts
Features
•32 bit, 33/66MHz fully compliant PCI host interface
•Two brackets to support low profile PCI and regular
size PCI in one card
•LBA supports smaller drives as well as drives larger
than 137GB
•Supports Spread Spectrum in receiver
•Supports two independent SATA channels
•Compliant with PCI Specification, revision 2.2
•Operating Systems: Mac OS X, Windows XP
Package contents
•PCI card
•Extra bracket for use with low profile computer cases.
•CD containing user’s manual, warranty information, and drivers
Installatio em. Unplug the power cable.
3. ly seated in the
th PCI Express (PCI-e) slots.
ith a screw.
6. Follow the instructions for your computer type to install firmware/drivers.
indows driver Installation
Drivers” on the CD.
2. Follow the instructions in the “readme.txt” file.
stalling firmware for Mac Usage
1, TCS2-0 Mac Firmware” on the CD. Open the
lashrom.command” file.
tinue”.
Press “C” on your keyboard and hit enter. The terminal window will now look like this:
n
1. Power down the computer syst
2. Open the computer case.
Insert the PCI board into an available 32-bit or 64-bit PCI or PCI-X slot. Do not force it,
but it will take firm pressure to insert the card. Make sure the card is ful
slot. Note: the card is not compatible wi
4. Secure the card in place w
5. Power up the computer.
W
1. Browse to the folder “TCS1-1, TCS2-0 Windows
In
Browse to the folder “TCS1-
TCS1-1
“F
When you launch the file, a terminal window will open and prompt you to “enter C to con
