Wiesenfield WIE-CCD-100 User manual

USER MANUAL
INSTRUKCJA OBSŁUGI
expondo.com
CHICKEN DOOR OPENER
WIE-CCD-100

EN
Product name:
CHICKEN DOOR OPENER
PL
Nazwa produktu:
AUTOMATYCZNA KLAPA KURNIKA
EN
Product model:
WIE-CCD-100
PL
Model produktu:
EN
Manufacturer
expondo Polska sp. z o.o. sp. k.
PL
Producent
EN
Manufacturer Address
ul. Nowy Kisielin – Innowacyjna 7, 66-002 Zielona Góra | Poland, EU
PL
Adres producenta

Technical data
Parameter description
Parameter value
Product name
CHICKEN DOOR OPENER
Model
WIE-CCD-100
Batteries
4xAA or 6V
Ambient temperature [°C].
>-18
Overall dimensions (width x
depth x height) (mm]
670 x 300 x 100
Weight [kg]
1.6
1. General Description
This manual is intended to assist you for safe and reliable use. The product is designed
and manufactured strictly according to technical specifications using the latest
technology and components and maintaining the highest quality standards.
CAREFULLY READ AND UNDERSTAND THIS MANUAL
BEFORE STARTING THE WORK.
To ensure long and reliable operation of the device, make sure to operate and maintain
it properly in accordance with the guidelines in this instruction manual. The technical
data and specifications in this manual are up-to-date. The manufacturer reserves the
right to make changes in order to improve the quality. Taking the technical progress
and the possibility of reducing noise into account, the unit is designed and built in such
a way so that risks resulting from noise emissions are reduced to the lowest possible
level.
Explanation of symbols
The product complies with applicable safety standards.
Read the manual before use.
Recyclable product.

CAUTION! or WARNING! or REMEMBER! describing a given situation
(general warning sign).
CAUTION! The figures in this manual are illustrative only and may vary
in some details from the actual appearance of the product.
2. Safety of use
CAUTION!
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury or death.
The term "device" or "product" in the warnings and in the description of the instructions
refers to CHICKEN DOOR OPENER.
2.1. Safety in the workplace
a) If you have any doubts as to whether the product is working properly or if it is
damaged, contact the manufacturer's service department.
b) Only the manufacturer's service department may repair the appliance. Do not
attempt to repair the product on your own!
c) Keep this manual for future reference. If the unit is to be passed on to third
parties, the operating instructions must also be handed over together with the
unit.
d) Keep packaging components and small installation parts out of the reach of
children.
2.2. Personal safety
a) The product is not intended to be used by individuals (including children) with
reduced mental, sensory or intellectual capacity or lack of experience and/or
knowledge, unless they are supervised by an individual responsible for their
safety or have been given instructions by the responsible individual on how to
operate the product.

b) The appliance is not a toy. Children should be watched to ensure that they do
not play with the appliance.
2.3. Safe use of the device
a) Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
b) To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
c) Avoid situations where the unit stops working because it is handling a heavy
load. This can cause overheating of the drive elements and consequent
damage to the equipment.
d) Do not touch any moving parts or accessories unless the device is unplugged.
e) Clean the device regularly to prevent permanent dirt build-up.
f) The product is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
g) Do not tamper with the device to alter its performance or design.
h) Keep the unit away from sources of fire and heat.
i) Batteries that are not rechargeable should not be charged.
j) Do not mix different types of batteries, or old and used batteries.
k) Install batteries according to the polarity direction indicated on the unit and
battery symbols.
l) Remove used batteries from the unit and dispose of them safely in accordance
with the law.
m) Do not use the appliance to lift doors that weigh more than recommended.
n) Do not immerse the unit in water or other liquids.
o) Be careful when lowering the door. Despite the low power of the unit's motor,
it is recommended to avoid contact with the moving door.
CAUTION! Although the product has been designed to be safe, with adequate
safeguards, and despite the additional safety features provided to the user,
there is still a slight risk of accident or injury when handling the unit. Caution
and common sense are advised when using the product.
3. Instructions for use
The product is intended to be used as an automatically opening and closing door
to a poultry house.
The user is responsible for any damage resulting from misuse.

3.1. Product overview
1 - Door
2 - Control panel
3 - Bar
Control panel

1 - Display
2 - Warning light
3 - Light sensor
4 - "MENU" button
5 - "↓" button (down)
6 - "↑" button (up)
3.2. Preparation for operation
Set contents

a - Controller
b - 7x M4 x 12 self-tapping screws
c - 4x M4 knobs
d - 6V battery terminals
Note: a screwdriver (not included) is a tool for assemblying the unit.
Place of installation:
•The door should be mounted on the outer wall of the poultry house (the
controller has a light sensor).
•The ambient temperature should not fall below -18 ° C.
Assembly
1) The recommended size of the entrance to the poultry house is 39.3 x
25.4 cm (height x width).

2) Screw the guides to the wall of the poultry house with 4 self-tapping
screws.

3) Remove the 4 locking knobs from the sides of the controller. Make sure
the sensor is on the left side of the door, in the lower corner.

4) Gently remove the control panel cover to install 4 AA batteries or 1 6V
battery. Next reinstall the front panel of the controller and tighten the
4 locking knobs.

5) Press "↑" to open the door. Install 2 screws approximately 10 cm above
the control panel in the wall of the poultry house to prevent the door
from tilting to the left or right. The screws should be screwed in right
next to the door protruding above the controller. Be careful not to
damage the door.

3.3. Working with the device
Driver settings
1) The current time
Press and hold the "MENU" button for 2 seconds to start changing the clock settings.
Press the "Menu" button to switch between hours and minutes. Press "↑" or "↓" to
change the values.

2) Mode of operation
The device can operate in one of the two available modes:
•TIMER-TIMER: closing and opening depending on the time
•LIGHT-LIGHT: closing and opening depending on the lighting
The TIMER-TIMER operation mode allows users to set the time of automatic opening
and closing of the door. Press the "MENU" button to go to the settings.
Mode selection:
Press the "↑" or "↓" button to toggle between the TIMER-TIMER and LIGHT-LIGHT
modes.
Opening time:
Press the "Menu" button to switch between hours and minutes. Press "↑" or "↓" to
change the values.
Closing time:
Press the "Menu" button to switch between hours and minutes. Press "↑" or "↓" to
change the values.

The LIGHT-LIGHT mode allows the user to set when the door is to open and close
automatically depending on the lighting. The degree of light can be set from 0 to 23.
Smaller values correspond to lower lighting. Press the "MENU" button to go to the
settings.
Opening lighting:
Adjust the lighting level that triggers the opening by pressing "↑" or "↓" (in the range
15-23).
Closing lighting:
Adjust the closing level by pressing "↑" or "↓" (in the range 0-14).
3) Protection level

This screen allows users to set the protection level (in the range 0-8 OFF).
Press "↑" or "↓" to select the level. The higher the value, the higher the level can be.
4) Saving the settings
Press the "MENU" button to save the settings.
Tips:
•When it comes to the light level setting mode, the range in which the door
will stay open is 15-23 and the range in which the door will close is 0-14. 0
means complete darkness and 23 means total brightness.
•If "Error" is displayed on the screen while in use, check the "Error Codes"
table.
•If the red indicator light flashes frequently, it means that an error has
occurred. Press the "MENU" button to wake up the screen and display the
error code.
•If the "TIMER-TIMER" mode is used, the user may have to wait to see if the
device is working properly.
•The "LIGHT-LIGHT" mode can be tested by covering the light sensor. After a
few seconds, the door will begin to close. When the door is nearly closing,
uncover the light sensor and the door will be raised to its original position.
•If the device is disconnected and reconnected to the power supply, the
controller will remain in sleep mode for 30 minutes until the "MENU" button
is pressed.
•After replacing the batteries, set the current time again and save the settings.
Manually closing/opening the door
•Press and hold the "↓" button for 4 seconds - the door will close temporarily
(it will open after 3 minutes).
•Press and hold the "↑" button for 4 seconds - the door will open temporarily
(it will close after 3 minutes).

Connecting 6V/4xAA batteries
Cables for connecting to different types of batteries are included in the set.
Depending on the user's choice, connect the cable plug to the PCB and the other end
to the AA battery compartment or to the 6V battery (in this case, attach the terminals
to the appropriate poles of the battery).
The drawings show the connection to a 6V battery (not included):

3.4. Cleaning and maintenance
a) Before cleaning the device, remove the batteries.
b) Use only non-corrosive cleaning agents for cleaning the surfaces.
c) After each cleaning, all the parts should be dried well before the unit is used
again.
d) Store the unit in a dry and cool place protected from moisture and direct
sunlight.
e) Do not spray the unit with a stream of water or immerse it in water.
f) Use a soft cloth for cleaning.
g) Do not leave the batteries in the unit when it will not be used for a long time.
INSTRUCTIONS FOR THE SAFE DISPOSAL OF BATTERIES.
The appliances are equipped with batteries.
Remove used batteries from the unit in the same way you put them in.

Return the batteries to a unit responsible for their disposal.
DISPOSAL OF USED UNITS.
At the end of its useful life, this product should not be disposed of with normal
household waste but should be taken to a collection point for the recycling of
electrical and electronic equipment. This is indicated by the symbol on the
product, operating instructions or packaging. The materials used in this appliance
are recyclable according to their marking. By reuse, recycling or applying other
forms of use of waste machines, you make a significant contribution to the
protection of our environment.
Your local administration will provide you with information about the appropriate
disposal point for used appliances.
ERROR CODES:
Error
code
Screen
Reason
Solution
Error 1
Panel out!
1. Front panel
Check if the front panel is installed
correctly. If not, install the front panel
and screw the 4 knobs on the sides.
2. The position
sensor does not
detect the
magnet on the
door
Pull out the front panel to lower the
door and make sure that there are no
objects at the bottom of the door that
obstruct its movement. Then reinstall
the panel and screw it on.
3. The upper
magnet has fallen
off
Install the magnet or contact the
manufacturer if a new magnet is
needed.
4. Internal
position sensor
error
If there is still an error after "1, 2, 3",
send the unit for repairs.
5. PCB is defective
If there is still an error after "1, 2, 3",
send the unit for repairs.
Error 2
Open Blocked
Door blocked
while opening
1. Check if the gear is not blocked.
2. Check if there are no obstacles in
the guides.
3. If there are no obstructions, add
some lubricant to the guides.
After solving the problem, press the
"MENU" button to clear the error.
Close Blocked
Door blocked
while closing
1. Check if there are no obstructions at
the bottom of the door.
2. Check if there are no obstacles in
the guides.

3. If there are no obstructions, add
some lubricant to the guides.
4. Increase the degree of protection
After solving the problem, press the
"MENU" button to clear the error.
The top door
magnet has fallen
off
Reinstall the magnet, then press
"MENU" to clear the error. Contact the
manufacturer if a new magnet is
required.
Error 3
Work Time
Out
1. Low battery
charge makes the
door to open
slowly
Use new batteries, then set the
current time and save the settings.
2. When opening
the door, the gear
becomes
jammed, making
the door to open
slowly
Make sure that the gear is not blocked
by any objects.
After solving the problem, press the
"MENU" button to clear the error.
3. Obstacles on
the guides make
the door open
slowly
Check if there are no obstacles on the
guides. If necessary, add some
lubricant to the guides. After solving
the problem, press the "MENU"
button to clear the error.
4. The top door
magnet has fallen
off
Pull out the front panel and reinstall
the magnet, then press the "MENU"
button. Contact the manufacturer if a
new magnet is required.
Error 4
Motor Error!
The motor is not
working properly
1. Check if the motor cables are in
good condition and if all plugs are
connected.
2. If the error persists after following
all the recommendations in this table,
send the device to the manufacturer's
service centre.