Wiesenfield WIE-CCD-400 User manual

USER MANUAL
INSTRUKCJA OBSŁUGI
expondo.com
CHICKEN DOOR OPENER
WIE-CCD-400
WIE-CCD-500

EN
Product name:
CHICKEN DOOR OPENER
PL
Nazwa produktu:
AUTOMATYCZNA KLAPA KURNIKA
EN
Product model:
WIE-CCD-400
WIE-CCD-500
PL
Model produktu:
EN
Manufacturer
expondo Polska sp. z o.o. sp. k.
PL
Producent
EN
Manufacturer Address
ul. Nowy Kisielin – Innowacyjna 7, 66-002 Zielona Góra | Poland, EU
PL
Adres producenta

Technical data
Parameter description
Parameter value
Product name
CHICKEN DOOR OPENER
Model
WIE-CCD-400
WIE-CCD-500
Batteries
4xAA
4xAA
Power supply
Input: 100-240VAC
50-60Hz 0.5A
Output: 6VDC 1.5A 9W
-
Ambient temperature [°C].
> -18
Permissible weight of lifted
door [kg]
0.3-1
Overall dimensions (width x
depth x height) (mm]
600 x 260 x 100
Weight [kg]
1
0.9
1. General Description
This manual is intended to assist you for safe and reliable use. The product is designed
and manufactured strictly according to technical specifications using the latest
technology and components and maintaining the highest quality standards.
CAREFULLY READ AND UNDERSTAND THIS MANUAL
BEFORE STARTING THE WORK.
To ensure long and reliable operation of the device, make sure to operate and maintain
it properly in accordance with the guidelines in this instruction manual. The technical
data and specifications in this manual are up-to-date. The manufacturer reserves the
right to make changes in order to improve the quality. Taking the technical progress
and the possibility of reducing noise into account, the unit is designed and built in such
a way so that risks resulting from noise emissions are reduced to the lowest possible
level.
Explanation of symbols
The product complies with applicable safety standards.

Read the manual before use.
Recyclable product.
CAUTION! or WARNING! or REMEMBER! describing a given situation
(general warning sign).
CAUTION! Risk of electric shock! (only for model: WIE-CCD-400)
CAUTION! Hanging weight! Be careful when lowering the door.
CAUTION! The figures in this manual are illustrative only and may vary
in some details from the actual appearance of the product.
2. Safety of use
CAUTION!
Read all safety warnings and instructions. Failure to follow the
warnings and instructions may result in electric shock, fire
and/or serious injury or death.
The term "device" or "product" in the warnings and in the description of the instructions
refers to CHICKEN DOOR OPENER.
2.1. Electrical safety
NOTE: Applies to model WIE-CCD-400 when used with a voltage adapter.
a) The plug of this device must fit into the outlet. Do not modify the plug in any
way. Original plugs and matching outlets reduce the risk of electric shock.
b) Avoid touching grounded parts, such as pipes, heaters, ovens, and
refrigerators. There is an increased risk of electric shock if your body is
grounded and touches the device while exposed to direct rain, wet pavement,

or while working in a damp environment. If water enters the device, there is
an increased risk of damage to the unit and electric shock.
c) Do not touch the device with wet or damp hands.
d) Do not use the cord in an unintended manner. Never use it to carry the device
or to pull the plug out of the socket. Keep the cord away from heat sources,
oil, sharp edges or moving parts. Damaged or tangled cords increase the risk
of electric shock.
e) When working outdoors, use an extension cord appropriate for outdoor use.
Using an extension cord designed for outdoor use reduces the risk of electric
shock.
f) If you cannot avoid using the product in a wet environment, use a residual
current device (RCD) to connect the product to electrical mains. Using an RCD
reduces the risk of electric shock.
g) Do not use the appliance if the power cord is damaged or shows signs of wear.
A damaged power cord should be replaced by a qualified electrician or the
manufacturer's service department.
h) To avoid electric shock, do not immerse the cable, plug, or the appliance itself
in water or other liquid. Do not use the appliance on wet surfaces.
i) CAUTION – DANGER TO LIFE! When cleaning or using the appliance, never
immerse it in water or other liquids.
j) Do not use the appliance in rooms with very high humidity / in the immediate
vicinity of water tanks!
2.2. Safety in the workplace
a) If you have any doubts as to whether the product is working properly or if it is
damaged, contact the manufacturer's service department.
b) Only the manufacturer's service department may repair the appliance. Do not
attempt to repair the product on your own!
c) In the event of a fire threat or fire, use only dry-powder or carbon dioxide (CO2)
extinguishers to extinguish the device while it is connected to a power supply.
d) Keep this manual for future reference. If the unit is to be passed on to third
parties, the operating instructions must also be handed over together with the
unit.
e) Keep packaging components and small installation parts out of the reach of
children.
2.3. Personal safety
a) The product is not intended to be used by individuals (including children) with
reduced mental, sensory or intellectual capacity or lack of experience and/or

knowledge, unless they are supervised by an individual responsible for their
safety or have been given instructions by the responsible individual on how to
operate the product.
b) The appliance is not a toy. Children should be watched to ensure that they do
not play with the appliance.
2.4. Safe use of the device
a) Before making any adjustments, replacing elements or putting away the
device, remove the plug from the socket (applies to WIE-CCD-400 model) and
take out the batteries. This precaution reduces the risk of accidental start-up.
b) Keep unused product out of the reach of children and anyone unfamiliar with
the device or this manual. Products are dangerous when used by
inexperienced users.
c) Keep the product in good working order.
d) Keep the product out of the reach of children.
e) Repairs and maintenance should be carried out by qualified personnel using
only original spare parts. This will ensure the safety of use.
f) To ensure the designed operational integrity of the device, do not remove
factory-installed covers or loosen screws.
g) Avoid situations where the unit stops working because it is handling a heavy
load. This can cause overheating of the drive elements and consequent
damage to the equipment.
h) Do not touch any moving parts or accessories unless the device is unplugged.
i) Clean the device regularly to prevent permanent dirt build-up.
j) The product is not a toy. Cleaning and maintenance must not be performed by
children without adult supervision.
k) Do not tamper with the device to alter its performance or design.
l) Keep the unit away from sources of fire and heat.
m) Do not use the appliance to lift doors that weigh more than recommended.
n) Do not immerse the unit in water or other liquids.
o) Be careful when lowering the door. Despite the low weight of the door, it is
recommended to avoid contact with the falling load.
CAUTION! Although the product has been designed to be safe, with adequate
safeguards, and despite the additional safety features provided to the user,
there is still a slight risk of accident or injury when handling the unit. Caution
and common sense are advised when using the product.

3. Instructions for use
The product is intended to be used as an automatically opening and closing door
to a poultry house.
The user is responsible for any damage resulting from misuse.
3.1. Product overview

1 - Controller
2 - Wire
3 - Door
4 - Guides
5 - Voltage adapter socket (WIE-CCD-400 only)
3.2. Preparation for operation
Set contents

a - Controller
b - Controller cover
c - Self-tapping screws for mounting guides
d - Self-tapping screws for mounting the controller (1 pc. spare)
e - M4x30 flat head screws for mounting the controller cover
f - Plug to cover the light sensor
g - Guides
h - Voltage adapter (WIE-CCD-400 only)
Note: a screwdriver (not included) is a tool for assemblying the unit.
Place of installation:
•The controller should be mounted on the outer wall of the poultry house (the
controller has a light sensor).
•The controller should be installed above the hen entrance.
•It is recommended that the entrance measures max. 22 x 32 cm (width x
height).
•The ambient temperature should not fall below -18°C.
•In the case of power supply via a voltage adapter (WIE-CCD-400 only), make
sure that the connection to the power outlet is waterproof or adequately
shielded from the weather. It must be possible to disconnect the power
supply at any time.
Assembly
1) Install the left guide on the house with the self-tapping screws.

2) Slide the door into the left guides.

3) Install the right guide on the house with self-tapping screws. Check that the
door slides smoothly along the guides.
TIP: If the door moves too heavily, check if the guides are not too tight.
Alternatively, a suitable lubricant can be used.

4) Unscrew the screws securing the front panel of the controller and remove
the battery compartment. Install 4 AA batteries and insert the compartment
back.

5) Install the controller over the entrance using the self-tapping screws.
Manually move the door up and tie it to the cable (make sure the cable hangs
vertically).

6) The door will perform a functional test (it will close and open once at a height
of approximately 30 cm). The opening height can be set by the user (see
"Controller settings" for details).

3.3. Working with the device
Driver elements

1 - "MENU" button
2 - "↓" button (down)
3 - "↑" button (up)
4 - Battery compartment cable socket/socket for the cable connecting to the
power adapter (WIE-CCD-400 only)
5 - Battery compartment
6 - Light sensor
7 - Motor
8 - Indicator light
Connection to the power supply via a voltage adapter (WIE-CCD-400 only)

If you need to connect the device to the power supply using a voltage adapter, be sure
to swap the wires connected to the PCB. Disconnect the unused cord, and instead
connect the connecting cord to the selected power source (battery box or voltage
adapter socket).
ATTENTION: Changing the connection of the wires should be done when the power
supply is disconnected.
Driver settings
1) Initial screen

Press and hold the "MENU" button for more than 2 seconds to activate the startup
screen which will show the current time. Press "MENU" again to go to further settings.
2) Setting the opening height
Press and hold the "↑" button to raise the door (or the "↓" button to lower the
door), then press the "MENU" button to save the setting. Press the "MENU" button
again when the screen displays "done".
3) Opening the door

The message means that the next screen will allow you to select the opening time or
the level of lighting that will trigger the opening. Pressing the "MENU" button will take
you to the next screen for settings.
4) Opening time
To change the opening time, press the "↑" or "↓" buttons. Press the "MENU" button
to toggle between setting the hours and minutes. Pressing the "MENU" button again
takes you to the next setting screen.
5) Light level triggering the door to open

To change the value of the lighting that causes the door to open, press the "↑" or
"↓" buttons (values in the range 15-23). Pressing the "MENU" button again takes you
to the next setting screen.
6) Closing the door
The message indicates that the next screen will allow you to select the shutdown time
or the lighting level that will close the door. Pressing the "MENU" button will take you
to the next screen for settings.
7) Closing time