Wingsland X1 Instruction manual

Quick Start Manual V1.0

1
2
4-5
4
4
5
6-11
6
6
6
13
Contents
Fly Safety Notice
1 Prepare the Flight
1.1 Aircraft Diagram
1.2 wingsland X1 APP Main Interface
1.3 Flight Battery
2 Flight Control
2.1 Pre-Flight Checklist
2.2How to usepropeller Guardand propellers
2.3 Link the Aircraft
2.4 /Auto Takeoff/LandingPalm Takeoff
2.5 Control Mode
2.6 Photos/Videos
3Disclaimer
2.7 How to disassemble propeller guardsand propellers
7
11-12
11
11
10
10
8
3
Package List
4Product Safety Notice
5 Flight Battery Safety Guidelines
6 Limitation of Liability
X1 Quick Start Manual

Fly Safety Notice
1. Using the X1 has potential safety risk, children under 14 are not recommended to be the operator. Install the
propeller guards during the using is recommended.
2. For increased safety, flying your aircraft in a nofly zone is prohibited. Please follow the local laws to fly your
aircraft.
3. For your safety flight, please ensure your aircraft flies in an open-area and your vision range. Crowds, trees, tall
buildingsand high-tension wires or magnetic field may also affect aircraft’s signal and compass. Flying your
aircraft in such areas is not recommended.
4. When the battery level is low. Users are advised to land the aircraft immediately when prompt. We
recommend you continue your flight after fully charged.
5. For indoor flight, please only fly your aircraft when lighting condition is adequate and on textured surface. (For
more information please refer to the X1 user manual) Optical Flow Position System may not work properly when
the aircraft is flying over monochrome surfaces, transparent surfaces, highly reflective surfaces and water.
6. After the flight, please long press the power button to turn off the aircraft and take out the flight battery to avoid
excessive discharging. Please store the battery in a dry place with the temperature around 20°C~30°C. For a
long battery life,please keep the battery level between 40%~70% before the storing for a relative long period.
7. Battery capacity is significantly decreased when flying in low temperature environments. We recommend you
turn on the aircraft to warm up the battery close to 20 degrees Celsius or 68 degrees Fahrenheit.
8. Please choose a wild open area to fly your aircraft. Do not touch the rotating propellers.
9. Be careful when flying the aircraft. Avoid hitting people, and keeping certain distance away from children and animals.
10. Please do not fly the aircraft into the fireplace, the oven or over other heat source.
11. Do not fly the aircraft into water or landing on a water surface.
12. Do not fly the aircraft through a window from indoor to outdoor.
2
X1 Quick Start Manual

Package List
X1 FightLiPo Batteryx1
WINGSLANDX1Drone x1
Backup propeller x4
USB Cablex1 Quick Start Manual x1
MADE IN CHINA
Please contact WINGSLAND after-sales service or the dealers if there is anything missed.
Propeller guards (1 set)
3
X1 Quick Start Manual

1. Prepare the Flight
1.1 Aircraft Diagram
9
10
13
11
14
12
1
2
3
4
5
6
7
8
1
2
3
5
47
6
8
9
10
11
13
14
12
Propeller guard
Propeller
Arm
Camera
Back light
Accessory port
Battery
Battery clip
USB port
Motor
Antenna
Front light
Footpad
1.2 Wingsland X1 APP Main Interface
The APP can alsobe found on WINGSLAND official website (www.wingsland.com), Google Play and
App Store.
Notice: Camera Angle is manually adjustable.
Optical flow assisted positioning module
1
2
3
4
5
6
7
8
9
10
11
12
13
90%
21 3 4
5
6
7
8
9
10
11
12
13
Exit
Connection Status
WiFi Signal
Battery Level
General Settings
IOC Setting
Flipping
Flight Data
Auto Takeoff/Landing Button
(3s)Time-lapse photography
Video
Shutter
Photo
TakeOff
H: 0. 0 V . S： 0. 0 F .T:00:00
Wingsland X1 APP Control Interface:
4
X1 Quick Start Manual

5V
● The rechargeable X1 LiPo Battery capacity is 600 mAh, The maximum flight time is 7 minutes.
● Plug the battery into the drone, connect the drone USB port and the charger with USB cable, then
start to charge the battery, the standard input voltage is 7.6V.
● The X1 front lights will flash slowing when it is under charging. When it is fully charged, the front
lights will be off, please disconnect the power and get the battery out.
● The charging time is about 50 minutes, and charging current >1Arecommended
Charging the drone
Notes:
1.After flying the drone, if the battery temperature is high, please wait and charge it after it is back to environment
temperature. The maximum flight time is tested in Wingsland lab, for reference only.
2.Power adapters with lower output currents would make charging time longer.
Front LED Lights
1.3 Flight Battery
Insert the battery into the compartment in correct
securely clamped,direction, and make sure it is then
the drone is powered on and front lights are on.
Battery Installation
Flip down the battery clip and then pull out the
battery.
Replace the Battery
5
X1 Quick Start Manual

2 Operation
● Mobile device and flight battery are fully charged before flight.
2 1 Pre-Flight Checklist.
2 2 How to use propeller Guard and propellers.
The propeller guards have been installed to the aircraft ,You just need to them outwards, Make sure the unfold
propellers are not damaged and the direction of arrows on propellers are the same with Aircraft’s.
States as delivered Unfold the propeller guards outwards
Make sure direction of arrows on propellers
are the same with Aircraft’s
Counter-clockwise（B）
Clockwise（A）
2.3 Link tothe Aircraft
● Insert the battery , X1 will power on immediately .
● Open the APP, Tap “Start to Fly ”to enter into operation interface , When image from camera actived, the
connection established .
● Enter into the WIFI setting interface of Mobile device. Select corresponding wi-fi of X1 from the Wi-Fi list.
The default WiFi name format is wingsland X1_air_xxxxxx. Enter the default password wingsland.
Clockwise（A）
Clockwise（A）Counter-clockwise（B）
Counter-clockwise（B）
Nose
6
X1 Quick Start Manual

2.4 Palm Takeoff/Auto Takeoff/Landing
Please fly your aircraft when lighting condition is adequate and on textured surface only.
Auto Takeoff
Enter the flying interface, tap the One-key Takeoff
icon ,read the warning ,then confirm to
active the feature. The aircraft will automatically
take off and hover above the ground.
90%
Confirm take-off
Cancel
Before the takeoff, put aircraft on a flat
level ground. Do not touch the propellers.
Tap and confirm to take off, the
aircraft will take off automatically.
H: 0. 0 V . S： 0. 0 F .T:00:00
Palm Takeoff
● Connect the X1 drone with mobile device, then put the X1 on your palm and stretch out your arm.
● Tap the “IOC Setting”icon on App,Choose “Palm Takeoff ” function, and confirm.Double-click the image area on
the App, the drone will Take off automatically.
● X1 will fly upward to 0.5 meter above the palm and hover there.
Notice: Please make sure the upward direction is clear of obstacles before palm takeoff.
Steps of Palm Takeoff
Choose Palm Takeoff
90%
H: 0.0 V . S： 0. 0 F . T:00:00
Palm Takeoff
Motion Sensitive
Select a Function
Takeoff
Auto Landing
When aircraft is getting ready to land, Tap icon ,
and confirm the auto landing , Aircraft will start
landing automatically. After landing the motor will lock
automatically and the propeller will stop turning .
Landing
Notice：make sure there is no obstructions underneath the
aircraft before landing.
90%
H: 0. 0 V . S： 0. 0 F .T:00:00
Cancel
Please confirm to one-key land
Please make sure the landing point
is safe. Do not touch the propellers.
The joystick can adjust the landing point.
Tap the exit button to stop landing.
7
X1 Quick Start Manual

2.5 Control Mode
Virtual joystick control
After X1 took off and hovering , touch the screen, the
virtual joystick will be displayed on the APP interface.
Drag the dot in middle to control height and directions
of X1)
Virtual joystick
90 %
H: 0. 0 V . S： 0. 0 F .T:00:00
Mode 1
The left joystick: The right joystick:
fly forwards
fly backwards
Nose
Nose
rotate to
the left
rotate to
the right
fly upwards
fly downwards
Nose
fly rightfly left
Nose
The control mode is set to mode 2 by default, the left joystick controls the throttle and rotation of the aircraft,
the right joystick controls forward, back ward, left, right movements of the aircraft.
Mode 2
The left joystick: The right joystick:
fly upwards
fly downwards
Nose
rotate to
the right
rotate to
the left
Nose
fly forwards
fly backwards
Nose
Nose
fly rightfly left
8
X1 Quick Start Manual

90 %
Mode 1 and Mode 2 can be switched under control mode settings. Under Mode 1, the left joystick controls
forward, back ward, left, right movements of the aircraft, the right joystick controls the throttle and rotation
of the aircraft.
Switch to Mode 1 Switch to Mode 1
rotate to
the right
rotate to
the left
fly forwards
fly backwards
fly upwards
fly downwards
fly right
fly left
Mode 1 Mode 2
Joystick type
Control Mode
H: 0. 0 V . S： 0. 0 F .T:00:00
TakeOff
90%
Motion-sensitive Mode Interface
H: 0. 0 V . S： 0. 0 F .T:00:00
Virtual joystick control
Switch to motion-sensitive mode：
Tap“IOC Setting”icon ,choose motion-sensitive mode and confirm.
90 %
H: 0.0 V . S： 0. 0 F . T:00:00
Palm Takeoff
SelectaFunction
Motion Sensitive
Notice:In the motion-sensitive mode, the left joystick is same with the virtual joystick mode 2.
Motion sensitive mode is based on the gravity sensor built in the mobile device, to control the motions of the craft by
tilting the mobile device. Tap the screen, a virtual joystick will be displayed in the left of the APP screen, which
controls the throttle and rotation of the aircraft. Tap and hold the green round on the right of the APP screen, then tilt
the mobile device to control the motions of the aircraft . Tilt the mobile device up/down, the aircraft will fly forward/
backward, tilt the mobile device left/right, the aircraft will fly toward left /right.
9
X1 Quick Start Manual