Winmate R10IB3S-SPT2 User manual

i
IP65 FLAT STAINLESS P-CAP PANEL PC
Flat Stainless P-CAP
Panel PC
Intel®Celeron®Bay Trail-M N2930 1.83 GHz
Full IP65
User Manual
Version 1.0
Document Part Number: 9152111I101H

USER MANUAL PREFACE
ii
IP65 FLAT STAINLESS P-CAP PANEL PC
PREFACE
Copyright Notice
No part of this document may be reproduced, copied, translated, or transmitted in any
form or by any means, electronic or mechanical, for any purpose, without the prior
written permission of the original manufacturer.
Trademark Acknowledgement
Brand and product names are trademarks or registered trademarks of their respective
owners.
Disclaimer
Winmate Inc. reserve the right to make changes, without notice, to any product, including
circuits and/or software described or contained in this manual in order to improve design
and/or performance. We assume no responsibility or liability for the use of the described
product(s) conveys no license or title under any patent, copyright, or masks work rights to
these products, and make no representations or warranties that these products are free
from patent, copyright, or mask work right infringement, unless otherwise specified.
Applications that are described in this manual are for illustration purposes only. We make
no representation or guarantee that such application will be suitable for the specified use
without further testing or modification.
Warranty
Winmate Inc. warranty guarantees that each of its products will be free from material and
workmanship defects for a period of one year from the invoice date. If the customer
discovers a defect, we will, at his/her option, repair or replace the defective product at no
charge to the customer, provide it is returned during the warranty period of one year,
with transportation charges prepaid. The returned product must be properly packaged in
its original packaging to obtain warranty service. If the serial number and the product
shipping data differ by over 30 days, the in-warranty service will be made according to
the shipping date. In the serial numbers the third and fourth two digits give the year of
manufacture, and the fifth digit means the month (e. g., with A for October, B for
November and C for December).
For example, the serial number 1W14Axxxxxxxx means October of year 2014.

USER MANUAL PREFACE
IP65 FLAT STAINLESS P-CAP PANEL PC
iii
Customer Service
We provide a service guide for any problem by the following steps: First, visit the website
of our distributor to find the update information about the product. Second, contact with
your distributor, sales representative, or our customer service center for technical
support if you need additional assistance.
You may need the following information ready before you call:
Product serial number
Software (OS, version, application software, etc.)
Description of complete problem
The exact wording of any error messages
In addition, free technical support is available from our engineers every business day. We
are always ready to give advice on application requirements or specific information on
the installation and operation of any of our products.

USER MANUAL PREFACE
iv
IP65 FLAT STAINLESS P-CAP PANEL PC
Advisory Conventions
Four types of advisories are used throughout the user manual to provide helpful information
or to alert you to the potential for hardware damage or personal injury. These are Notes,
Important, Cautions, and Warnings. The following is an example of each type of advisory.
NOTE:
A note is used to emphasize helpful information
IMPORTANT:
An important note indicates information that is important for you to know.
CAUTION/ ATTENTION
A Caution alert indicates potential damage to hardware and explains how to
avoid the potential problem.
Une alerte d’attention indique un dommage possible à l’équipement et
explique comment éviter le problème potentiel.
WARNING!/ AVERTISSEMENT!
An Electrical Shock Warning indicates the potential harm from electrical
hazards and how to avoid the potential problem.
Un Avertissement de Choc Électrique indique le potentiel de chocs sur des
emplacements électriques et comment éviter ces problèmes.
ALTERNATING CURRENT / MISE À LE TERRE!
The Protective Conductor Terminal (Earth Ground) symbol indicates the
potential risk of serious electrical shock due to improper grounding.
Le symbole de Mise à Terre indique le risqué potential de choc électrique
grave à la terre incorrecte.

USER MANUAL PREFACE
IP65 FLAT STAINLESS P-CAP PANEL PC
v
Safety Information
WARNING! / AVERTISSEMENT!
Always completely disconnect the power cord from your chassis
whenever you work with the hardware. Do not make connections while
the power is on. Sensitive electronic components can be damaged by
sudden power surges. Only experienced electronics personnel should
open the PC chassis.
Toujours débrancher le cordon d’alimentation du chassis lorsque vous
travaillez sur celui-ci. Ne pas brancher de connections lorsque
l’alimentation est présente. Des composantes électroniques sensibles
peuvent être endommagées par des sauts d’alimentation. Seulement du
personnel expérimenté devrait ouvrir ces chassis.
CAUTION/ATTENTION
Always ground yourself to remove any static charge before touching the
CPU card. Modern electronic devices are very sensitive to static electric
charges. As a safety precaution, use a grounding wrist strap at all times.
Place all electronic components in a static-dissipative surface or static-
shielded bag when they are not in the chassis.
Toujours verifier votre mise à la terre afin d’éliminer toute charge
statique avant de toucher la carte CPU. Les équipements électroniques
moderns sont très sensibles aux décharges d’électricité statique.
Toujours utiliser un bracelet de mise à la terre comme précaution. Placer
toutes les composantes électroniques sur une surface conçue pour
dissiper les charge, ou dans un sac anti-statique lorsqu’elles ne sont pas
dans le chassis.

USER MANUAL PREFACE
vi
IP65 FLAT STAINLESS P-CAP PANEL PC
Safety Precautions
For your safety carefully read all the safety instructions before using the device.
Keep this user manual for future reference.
Always disconnect this equipment from any AC outlet before cleaning. Do not
use liquid or spray detergents for cleaning. Use a damp cloth.
For pluggable equipment, the power outlet must be installed near the
equipment and must be easily accessible.
Keep this equipment away from humidity.
Put this equipment on a reliable surface during installation. Dropping it or
letting it fall could cause damage.
The openings on the enclosure are for air convection and to protect the
equipment from overheating.
CAUTION/ATTENTION
Do not cover the openings!
Ne pas couvrir les ouvertures!
Before connecting the equipment to the power outlet make sure the voltage
of the power source is correct.
Position the power cord so that people cannot step on it. Do not place
anything over the power cord.
If the equipment is not used for a long time, disconnect it from the power
source to avoid damage by transient over-voltage.
Never pour any liquid into an opening. This could cause fire or electrical
shock.
Never open the equipment. For safety reasons, only qualified service
personnel should open the equipment.
All cautions and warnings on the equipment should be noted.
*Let service personnel to check the equipment in case any of the following
problems appear:
oThe power cord or plug is damaged.
oLiquid has penetrated into the equipment.
oThe equipment has been exposed to moisture.
oThe equipment does not work well or you cannot get it to work
according to the user manual.
oThe equipment has been dropped and damaged.
oThe equipment has obvious signs of breakage.
Do not leave this equipment in an uncontrolled environment where the storage
temperature is below -20°C (-4°F) or above 60°C (140°F). It may damage the
equipment.

USER MANUAL PREFACE
IP65 FLAT STAINLESS P-CAP PANEL PC
vii
CAUTION/ATTENTION
Use the recommended mounting apparatus to avoid risk of injury.
Utiliser l’appareil de fixation recommandé pour éliminer le risque de
blessure.
WARNING! / AVERTISSEMENT!
Only use the connection cords that come with the product. When in
doubt, please contact the manufacturer.
Utiliser seulement les cordons d’alimentation fournis avec le produit.
Si vous doutez de leur provenance, contactez le manufacturier.
WARNING!/ AVERTISSEMENT!
Always ground yourself against electrostatic damage to the device.
Toujours vérifier votre mise à la terre afin que l’équipement ne se
décharge pas sur vous.
Cover workstations with approved anti-static material. Use a wrist strap
connected to a work surface and properly grounded tools and equipment.
Use anti-static mats, heel straps, or air ionizer for added protection.
Handle electrostatic-sensitive components, PCB’s and assemblies by the
case or the edge of the board.
Avoid contact with pins, leads, or circuitry.
Turn off power and input signals before inserting and removing connectors
or test equipment.
Keep the work area free of non-conductive materials, such as ordinary
plastic assembly aids and Styrofoam.
Use filed service tools, such as cutters, screwdrivers, and vacuum cleaners
that are conductive.
Always put drivers and PCB’s component side on anti-static foam.

USER MANUAL PREFACE
viii
IP65 FLAT STAINLESS P-CAP PANEL PC
Important Information
Countries/ Area
Symbol
This equipment complies with essential
requirements of:
European Union
Electromagnetic Compatibility
Directive(2014/30/EU)
Low Voltage Directive (2014/35/EU)
Restrictions of the use of certain hazardous
substances (RoHS) Directive (2011/65/EU)
USA
FCC Part 15 Subpart B Regulations Class B
Federal Communications Commission Radio Frequency Interface Statement
This device complies with part 15 FCC rules.
Operation is subject to the following two conditions:
This device may not cause harmful interference.
This device must accept any interference received including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a class "B" digital
device, pursuant to part 15 of the FCC rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the instruction
manual, may cause harmful interference to radio communications. Operation of this
equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at him own expense.
.

USER MANUAL PREFACE
IP65 FLAT STAINLESS P-CAP PANEL PC
ix
European Union
This equipment is in conformity with the requirement of the following EU legislations
and harmonized standards. Product also complies with the Council directions.
Electromagnetic Compatibility Directive (2014/30/EU)
EN55024: 2010/ A1: 2015
oIEC61000-4-2: 2009
oIEC61000-4-3: 2006+A1: 2007+A2: 2010
oIEC61000-4-4: 2012
oIEC61000-4-5: 2014
oIEC61000-4-6: 2014
oIEC61000-4-8: 2010
oIEC61000-4-11: 2004
EN55032: 2012/AC:2013
EN61000-3-2:2014
EN61000-3-3:2013
Low Voltage Directive (2014/35/EU)
EN 60950-1:2006/A11:2009/A1:2010/A12:2011/ A2:201

USER MANUAL ABOUT THIS USER MANUAL
i
IP65 FLAT STAINLESS P-CAP PANEL PC
ABOUT THIS USER MANUAL
This User Manual provides information about using the Winmate® IP65 Flat Stainless P-CAP
Panel PC with Intel ® Celeron ® Bay Trail-M N2930 1.83 GHz processor. This User Manual
applies to the IP65 Flat Stainless P-CAP Panel PC –R10IB3S-SPT2, R15IB3S-SPC3, R17IB3S-
SPA1, R19IB3S-SPM1 and W22IB3S-SPA3.
The documentation set for the IP65 Flat Stainless P-CAP Panel PC provides information for
specific user needs, and includes:
IP65 Flat Stainless P-CAP Panel PC User Manual –contains detailed description on
how to use the Panel PC, its components and features.
IP65 Flat Stainless P-CAP Panel PC Quick Start Guide - contains detailed description
on how to use the Panel PC, its components and features.
NOTE:
Some pictures in this guide are samples and can differ from actual product.
Revision History
Version
Date
Note
1.0
23-Nov-2016
Initial release

USER MANUAL CONTENTS
IP65 FLAT STAINLESS P-CAP PANEL PC
i
CONTENTS
PREFACE ...........................................................................................................................ii
ABOUT THIS USER MANUAL .............................................................................................. i
CHAPTER 1: INTRODUCTION............................................................................................. 2
1.1 Product Features......................................................................................................2
1.2 Package Content ......................................................................................................3
1.3 Connector Placement ..............................................................................................4
1.4 Physical Buttons and LED Indicators........................................................................5
1.5 Schematics and Dimensions ....................................................................................6
1.5.1 Dimensions 10.4" ..........................................................................................6
1.5.2 Dimensions 15"..............................................................................................6
1.5.3 Dimensions 17” .............................................................................................7
1.5.4 Dimensions 19” .............................................................................................7
1.5.5 Dimensions 21.5” ..........................................................................................8
CHAPTER 2: GETTING STARTED........................................................................................10
2.1 Powering On...........................................................................................................10
2.1.1 AC Adapter Components.............................................................................10
2.1.2 Power Considerations .................................................................................11
2.1.3 Power Consumption....................................................................................11
2.1.4 Connecting the Power.................................................................................12
2.2 Connector Pin Assignments ...................................................................................13
2.2.1 Power Cable.................................................................................................13
2.2.2 Serial Cable ..................................................................................................14
2.2.3 Ethernet Cable.............................................................................................15
2.2.4 USB 2.0 Cable ..............................................................................................16
2.3 Turning On and Off ................................................................................................17
CHAPTER 3: OPERATING THE DEVICE ...............................................................................19
3.1 Operating System...................................................................................................19
3.2 Multi-Touch............................................................................................................20
3.3 How to Enable Watchdog ......................................................................................21

USER MANUAL CONTENTS
ii
IP65 FLAT STAINLESS P-CAP PANEL PC
CHAPTER 4: AMI UEFI BIOS SETUP ...................................................................................23
4.1 When and How to Use BIOS Setup ........................................................................23
4.2 BIOS Functions .......................................................................................................23
4.2.1 Main Menu ..................................................................................................25
4.2.2 Advanced Menu ..........................................................................................26
4.2.3 Chipset Menu ..............................................................................................47
4.2.4 Security Menu .............................................................................................48
4.2.5 Boot Configuration ......................................................................................49
4.2.6 Save & Exit...................................................................................................51
4.3 Using Recovery Wizard to Restore Computer .......................................................53
CHAPTER 5: DRIVER INSTALLATION .................................................................................56
5.1 Installing Chipset Driver.........................................................................................56
5.2 Installing Graphics Driver.......................................................................................58
5.3 Installing Intel Sideband Fabric Device (Intel MBI) Driver (Windows 8)...............59
5.4 Installing Intel Trusted Engine Interface (Intel TXE) Driver ...................................60
5.5 Installing Intel Network Connections.....................................................................61
5.6 Installing Audio Driver............................................................................................62
CHAPTER 6: MOUNTING..................................................................................................64
6.1 Cable Mounting Considerations ............................................................................64
6.2 Safety Precautions .................................................................................................65
6.3 Mounting Guide.....................................................................................................66
6.3.1 VESA Mount.................................................................................................66
6.3.2 Yoke Mount .................................................................................................67
CHAPTER 7: TECHNICAL SUPPORT....................................................................................69
7.1 Software Developer Support .................................................................................69
7.1.1 Winmate Download Center.........................................................................69
7.1.2 Winmate File Share .....................................................................................69
7.2 Problem Report Form ............................................................................................70
APPENDIX A: PRODUCT SPECIFICATIONS .........................................................................72
APPENDIX B: Ordering Information .................................................................................75

USER MANUAL CHAPTER 1 INTRODUCTION
IP65 FLAT STAINLESS P-CAP PANEL PC
1
Introduction
This chapter gives you product overview,
describes features and hardware
specification. You will find all accessories
that come with the device in the packing
list. Mechanical dimensions and drawings
included in this chapter.

USER MANUAL CHAPTER 1 INTRODUCTION
2
IP65 FLAT STAINLESS P-CAP PANEL PC
CHAPTER 1: INTRODUCTION
Winmate® IP65 Flat Stainless P-CAP Series Panel PC is rugged, industrial-grade panel PC
series built to withstand challenging environments, undergoing rigorous testing to
ensure safety and top performance. All of the models in the series are sealed to IP65
standard. Stainless housing features anti-corrosion properties making it suitable for food,
chemical and pharmaceutical industries. P-CAP multi-touch screen supports glove mode
and provides even more convenience for the operator.
Winmate® IP65 Flat Stainless P-CAP Panel PC goes beyond that of the standard industrial
panel computers with elegant, edge-to-edge design, rugged construction, powerful
performance, and flexible mounting options.
1.1 Product Features
Winmate® IP65 Flat Stainless P-CAP Panel PC features:
Intel® Celeron® Bay Trail-M N2930 1.83 GHz
Stainless housing, built to withstand the most demanding industries
Sealed to IP65 for protection against water and dust
A true flat, easy-to-clean front surface with edge-to-edge design
Flat multi-touch panel pc with superior readability and P-CAP technology
Various mounting solutions, Yoke mount and VESA mount
Plenty of I/O s including USB 2.0, RS-232 serial port and RJ45-10/100/1000 LAN
ports
Waterproof ports with adapter cables for external connectivity
Rain/ Glove Mode

USER MANUAL CHAPTER 1 INTRODUCTION
IP65 FLAT STAINLESS P-CAP PANEL PC
3
1.2 Package Content
Carefully remove the box and unpack your Panel PC. Please check if all the items listed
below are inside your package. If any of these items are missing or damaged contact us
immediately.
Standard factory shipment list
Panel PC
IP65 Flat Stainless P-CAP
Panel PC Quick Start Guide
(Hardcopy)
Driver CD & User Manual
Varies by product
specifications
9152111I101T
IB32: 9171111I101Y
AC Adapter
Power Cable*
Serial Cable
50W 90PO12050002
80W 90PO12080003
Varies by destination
94G0103090Q0
Ethernet Cable
USB Cable
VESA Screws
94I0080080KF
9480108080Q0
913511101101

USER MANUAL CHAPTER 1 INTRODUCTION
4
IP65 FLAT STAINLESS P-CAP PANEL PC
1.3 Connector Placement
IP65 Flat Stainless P-CAP Panel PC has IP65 type connectors with protection cap.
For cable specifications refer to the Ch.2,“Cable Specifications” of this user manual.

USER MANUAL CHAPTER 1 INTRODUCTION
IP65 FLAT STAINLESS P-CAP PANEL PC
5
1.4 Physical Buttons and LED Indicators
Physical buttons and LED indicators located on the rear side of the Panel PC.
Physical Buttons
Icon
Button
Description
Reset
Press to reset the system
Power On/
Off
Press to power on or power off the device
LED Indicators
LED Type
Status
Description
On
Power is on
Off
Power is off
Blinking
Storage activity (Data is being read or written)
Off
System is idle

USER MANUAL CHAPTER 1 INTRODUCTION
6
IP65 FLAT STAINLESS P-CAP PANEL PC
1.5 Schematics and Dimensions
This section contains mechanical drawing of the panel PC. Notice that this is a simplified
drawing and some components are not marked in detail.
1.5.1 Dimensions 10.4"
Unit: mm
1.5.2 Dimensions 15"
Unit: mm