Winners Only DQ1451SW User manual

ALR-11279A-SHN Page 1 of 2 MADE IN MALAYSIA
PART NO FIGURE DESCRIPTION Q'TY
Wood Seat
Chair Back
PARTS LIST
1 Pce
1 Pce
1 Pce
1 Pce
Hardware Bag
Front Leg (Right)
1 Pce
Front Leg (Left)
2 Pcs
Side Stretcher (L / R)
DQ1451SW / DF520SW / DP520S / DB520S
DQ1451SW-01 /
DF520SW-01/
DP520S-01 /
DB520S-01 /
DQ1451SW-02 /
DF520SW-02 /
DP520S-02 /
DB520S-02
DQ1451SW-02 /
DF520SW-02 /
DP520S-02 /
DB520S-02
DQ1451SW-03 /
DF520SW-03 /
DP520S-03 /
DB520S-03
DQ1451SW-03 /
DF520SW-03 /
DP520S-03 /
DB520S-03
DQ1451SW-05 /
DF520SW-05 /
DP520S-05 /
DB520S-05
DQ1451SW-05 /
DF520SW-05 /
DP520S-05 /
DB520S-05
DQ1451SW-06 /
DF520SW-06 /
DP520S-06 /
DB520S-06
DQ1451SW-06 /
DF520SW-06 /
DP520S-06
DB520S-06
DQ1451SW-07 /
DF520SW-07 /
DP520S-07 /
DB520S-07
DQ1451SW-07 /
DF520SW-07 /
DP520S-07
DB520S-07
Caution: Please read instructions thoroughly before unpacking assembly parts. Sharp, exposed staple tips can cause
injury, therefore, for your protection, please remove any exposed staples used in packing.
Please keep all hardware parts out of the reach of children.
1.We recommend that you should assemble this product with the assistance of another person; this will make assembly easier,
and will help to eliminate damage to the product or injury to persons during assembly.
2.B e sure to check all packing materials carefully for small parts that may have come loose inside the carton during shipment.
3.Please do not over tighten screws or bolts.
4.Please put all parts on a non-abrasive floor before assembly, and follow the assembly steps to assemble your newly purchased
product correctly and efficiently.
P A R T S L IS T
WINNERS ONLY

ALR-11279A-SHN
STEP 2
STEP 1
STEP 3
Hardware List :
ASSEMBLY:
Turn the chair to standing position. Check it's balance and tighten all screw and bolts to complete the assembly.
MADE IN MALAYSIA
Page 2 of 2
Chair Back
Seat Frame
Side Stretcher
70mm
40mm
DQ1451SW / DF520SW / DP520S / DB520S
JCBC Bolt
2 pcs
M6x40mm
Pan Head
Screw
4 pcs
8x1.1/4"
JCBC Bolt
6 pcs
M6x70mm
Lock Washer
8 pcs
M6x13mm
Flat Washer
8 pcs
M6.5x16.5mm
Allen Key
1 pce
Glue
1 pce
(Fig.1.1)
(Fig.1.2)
(Fig.2.1)
Apply Glue
Pan Head Screw
(FIG.2.2)
Apply Glue and insert stretcher
with screw holes facing down.
(Fig.1) (Fig.2)
Allen Key
JCBC Bolt
Lock Washer
Flat Washer
Allen Key
JCBC Bolt
Lock
Washer
Flat Washer
Allen Key
70mm
JCBC Bolt
Flat
Washer
Lock
Washer
CARE INSTRUCTION
~ Be sure to use the same type of polish consistenly.
Your furniture will appear cloudy or streaky if oil
based or wax based polishes are interchanged.
~ Spray your furniture surface evenly. Wipe in a
circular motion with a soft clean cloth.
WINNERS ONLY
ST EP 1: Attached Wood Seat to Chair Back using the provided
hardware as shown on Fig 1.1 And Fig 1.2.
ST EP 2: Attached Front leg (Left & R ight ) to Wood Seat using the provided
hardware as shown on Fig 2.1.
Attached Side stretchers to the Chair back and the Front legs (L eft & R ight )
using the provided hardware as shown on Fig 2.2.